ThomasNet Industrial Newsroom - Electronic Components & Devices

Compact Power Line Filters feature slide-in mounting.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:54 -0500

Intended for quick mounting in panel openings, SRB Slide-In Power Line Filters are available with 33-1,000 pF capacitance range. Featuring IEC 320 male power connection and measuring 0.96 in. deep, shielded filters are suited for space-constrained communications, computer and consumer electronics, industrial and commercial, instrumentation, and medical equipment applications. UL Recognized, CSA Certified, and VDE approved filters are rated up to 15 A at 250 Vac, 50/60 Hz.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Power Line Filters | IEC Connector Filters

HCMOS Oscillators feature 2.5 V operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:45 -0500

With phase noise of -140 BC/Hz at 10 kHz offset and jitter period of 3 ps (RMS), F54 Series oscillators include models F547, F549, and F54S with stabilities as low as 15, 10, and 8 ppm, respectively. Low voltage oscillators operate over temperature range of -20 to +70°C or optional temperature range of -40 to +85°C (R Version) and feature maximum soldering temperature of 260°C at 10 sec. RoHS-compliant units offer input current of 7 mA and output current of 4 mA minimum.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Electronic Oscillators

Single-Chip SoC Device is designed for automotive use.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:42 -0500

Optimized for in-vehicle image-recognition processing applications, Model SH77650 enables production of vehicle information terminals, particularly next-generation car navigation systems and peripheral devices that can help increase driving safety. It has SH-4A CPU core that achieves 540 MIPS when operating at 300 MHz, while on-chip floating-point processing unit supports both single- and double-precision calculations and delivers 2.1 GFLOPS in single-precision mode at that speed.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Application Specific Integrated Circuits (ASIC)

PCI Card suits military and commercial programs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:39 -0500

Capable of accommodating 3 independent modules, Model 76C2 half-slot, multi-function PCI card offers ARINC 429/575, RS-422/485/232, D/S Converter, and Reference Generator functions along with A/D, D/A, S/D, LVDT/RVDT, and I/O functionalities. Each function is programmable at channel level. Available in both commercial temperature range and severe environment, industrial temperature range, unit has operating temperature ranges of -40°C to +85°C and 0°C to +70°C.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Computer Hardware and Peripherals

Search for suppliers of: Integrated Circuit Cards | PCI Communication Boards

Crimp-Style Connector is available in 3-16 circuits.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:39 -0500

With compact size, High Performance Interconnect (HPI) 2 mm locking connector series is available in single vertical row style and in different colors to allow customers to color code their systems. Accepting 30-24 AWG wire, it is rated 3.0 A at 100 Vac/Vdc and 1.0 A at 250 Vac/Vdc, and insulation OD range is 0.9-1.5 mm. Suited for -25°C to +85°C temperature range, disconnectable connector can be used in plasma display panels, LCD monitors, and small electronics equipment.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Crimp Type Connectors | Electronic Connectors | Locking Connectors

Connector suits cable-to-printed circuit board applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:38 -0500

Designed for PDUs requiring small form-factor interface, 20 A ET Connector offers integrated coding contacts which allow electronic functions to be designed into PDU electronics with activation on full insertion of cable connector. It uses crimp contacts from Standard Power Timer range, with current ratings of 20 A with 2.5 mm² cable. Unit is available in trays, with contacts on reels for customer assembly or fully assembled to specific customer requirements.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Contact Connectors | Cable Connectors | Crimp Type Connectors | Printed Circuit Board (PCB) Connectors

Clock and Data Recovery Device suits SONET/SDH applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:25 -0500

Housed in 20-pin TSSOP package, Model XRT91L33 operates at 166/622 Mbps SONET/SDH data rates. Single-channel OC-3/-12 Clock and Data Recovery Device can generate all clocks from 19 MHz crystal oscillator, as well as detect and generate various alarms and status outputs to provide immediate alerts and complete fault coverage. On-chip power regulation provides noise and crosstalk immunity to optimize performance that is critical to SONET/SDH applications.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Clock Generators

Flash-Based FPGAs are suited for military applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:24 -0500

Verified to operate across -55 to +125°C range, ProASIC®3 and ProASIC®3EL range in density from 600,000 to 3 million system gates and are immune to neutron-induced configuration upsets (firm errors). Both 1.2-1.5 V military-qualified devices deliver 64-bit 66 MHz PCI performance and offer on-chip user flash memory. Flash Freeze mode allows switching within 1 µs between active and static states, and secure in-system programming support enables field upgrades.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Gate Arrays | Military Specification Electronic Components

Terminal Blocks are RoHS compliant.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:43:04 -0500

Allowing wire to be connected without any prior stripping, XBQ series of insulation displacement connection terminal blocks are suited for applications in automated equipment and machine tools, packaging and material handling machinery, railway/mass transit systems, petrochemical, and any other application requiring high volume connections for low-voltage control and signal circuitry.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Insulation Displacement Connectors | Insulation Displacement Terminals | Insulating Blocks | Terminal Blocks

VCO operates from 200-239 MHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:43:03 -0500

Featuring control voltage range of 0.5-4.5 V, CVCO55FL-0200-0239 VCO can be used in digital radio equipment, fixed wireless access, satellite communications systems, and base stations. Packaged in 0.5 x 0.5 in. SMD package, unit has typical phase noise of -123 dBc/Hz at 10 kHz offset, and second harmonic suppression of -20 dBc typical. Input voltage is 5 V, with maximum current consumption of 25 mA. Pulling and pushing are minimized to 0.50 MHz and 0.50 MHz/V, respectively.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Surface Mount Oscillators | Low Noise Oscillators | Voltage Controlled Oscillators (VCO)

Card Connectors facilitate smooth microSD ejection.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:59 -0500

Available in 2 profile heights, microSD card connectors address card fly-out and sticking problems with spring-style card ejection systems in mobile and compact devices. Low-profile height (.060 in.), normal mount connector includes 2 brake tabs that help slow down card ejection without putting any friction on card. Along with internal housing features, .071 in. high normal and reverse mount microSD connectors combine brake tab and spring setting features for smooth card extraction.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Electronic Connectors | Card Edge Connectors

DIN Connector minimizes inventory and time requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:54 -0500

Supplied in single set or bulk components to eliminate effort of disassembly, BradConnectivity(TM) DIN 43650 connector is offered range of field attachable sizes, including Form A, B, and C. Design provides repeatable IP67 sealing performance, even in humidity, using external nut over cable. External nut accepts cables from 4-9 mm, minimizing parts inventory. This mPm® DIN connector is used to provide electrical connections in various applications.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: DIN Connectors

SMA Connectors provide 50 ohm constant impedance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:51 -0500

Designed to address issues with signal transmission and fragility of solder joints in hand-formable cable assemblies, eSMA Connectors feature extended ferrule, failure-proof coupling nuts, captivated center contacts, and solder damming positive cable stop. Units come standard with gold-plated bodies and gold-plated center contacts. Featuring weatherproof design, connectors are available as plugs, bulkhead jacks, and flange-mounted jacks.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: SMA Connectors

Modular Plug-In PCB Connectors promote wiring flexibility.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:50 -0500

Ranging in length from 10-120 mm with heights of 10.8 mm, SHS connectors offer horizontal or vertical mounting options and modular design for application adaptability. These pluggable black PCB blocks are available in 2-24 pole versions with 5.0 mm pitch and current ratings up to 10 A @ 250 V. Horizontal plugs clamp using galvanized steel tubular screw with tin-plated brass wire protector, and female plugs are engineered to pair with male PVS connector.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Printed Circuit Board (PCB) Connectors | Plug-In Connectors

PCM Telemetry Encoder is designed for airborne applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:46 -0500

Designed for analyzing flight parameters, Pulse Code Modulation (PCM) Telemetry Encoder is comprised of DAQ, conversion, frame processing FPGA, and PCM output sections. Fully configurable onboard system, based on AMCC PPC405, supports multiplexed sampling of 64 analog channels and comes in 140 x 110 x 115 mm MIL grade aluminum enclosure. MIL-STD-1553 Monitor/Remote Terminal offers dual-redundant bus interface to monitor and capture on-board 1553 bus transactions.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Encoders | Military Specification Electronic Components | Military Specification Products

RF Power Detector, Log Amp promote wireless performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:45 -0500

Integrated crest-factor RF power detection IC, ADL5502, combines rms RF detector and envelope detector. Featuring ±0.1 dB accuracy with crest factors up to 11 dBm, it enables cell phone designers to manage wireless handset power, extend battery life, and process complex 3G/4G signals. Logarithmic amplifier, ADL5513, offers 80 dB dynamic range with ±3 dB log conformance up to 4 GHz to help accurately detect and control output power up to WiMAX and Long-Term Evolution frequency bands.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: RF Power Amplifiers | RF Integrated Circuits

HBT Chip has breakdown voltage of 5 V.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2008 07:38:41 -0500

Utilizing 110 GHz fT Silicon Germanium processing technology, NESG303100G SiGe Heterojunction Bipolar Transistor (HBT) is suited for both oscillator and LNA applications in 2.4-5.8 GHz mobile communications designs. Features include maximum stable gain of 21.5 dB at 2 GHz and 10.0 dB at 5.2 GHz, noise figure of 0.8 dB at 2 GHz and 0.95 dB at 5.2 GHz, and hFE of 220-380.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Bipolar Transistors | Chip Transistors

FET is suited for use as buffer amplifier.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2008 07:38:41 -0500

Operating at 12 GHz from 3 V supply, NE3515S02 Hetero-Junction FET delivers P1 dB of +14 dBm with 14 dB linear gain while maintaining noise figure less than 0.5 dB, typ. Designed for DBS LNBs and high dynamic range front end applications, unit is housed in RoHS-compliant S02, hollow plastic surface-mount package with footprint of 3.2 x 3.2 mm that features recessed leads for low inductance.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Field Effect Transistors (FET)

ZigBee Transceiver IC helps simplify radio designs.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2008 07:38:41 -0500

Combining ZigBee-compliant RF transceiver with 8051-based 8-bit microprocessor, ZIC2410 Series offers Tx/Rx frequency range of 2.400-2.4835 GHz, 96 Kb Flash memory, and 8 Kb data memory. With -98 dBm receiver sensitivity and +8 dBm output power, IEEE 802.15.4 System-on-Chip solution delivers link budget of 106 dB and ensures immunity to interference from other 2.4 GHz transmissions, while eliminating need for power amplifiers and peripheral range extension components.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: RF Integrated Circuits

CMOS SP4T MMIC Switch operates with voltages of 1.8-5.3 V.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2008 07:38:41 -0500

Offered in 2.0 x 2.0 mm TSQFN 12 pin package, UPD5731T6M is suited for switching filters and antenna tuning elements in low power NFC and RFID receivers. It features onboard logic decoder, and frequency range of 10 MHz to 2.5 GHz. Unit has low insertion loss of 0.70 dB typ at 0.1-0.5 GHz, 1.0 dB typ at 1.0 GHz, and 1.30 dB typ at 2.0 GHz, high isolation of 35 dB typ at 1.0 GHz, P0.1 dB of +17 dBm typ at 2.8 V, and low current (RF off) of 0.01 µA.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Multi-Throw Single Pole Switches | Microwave Monolithic Integrated Circuits (MMIC) | Miniature Switches