ThomasNet Industrial Newsroom - Mounting & Attaching Products

Cordgrips meet UL 94V-2 flammability requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:43:01 -0500

Available in variety of cable diameters and mounting hole sizes, Snap-In Cordgrips provide cord and cable strain relief in limited clearance applications inside electrical cabinets and product housings. Cordgrips toollessly lock into cabinet or product housing. Constructed from polyamide 6/6 nylon, units suit any application that utilizes flexible power cord in non-liquid tight environment or where short assembly time is important to OEM manufacturers.

This story is related to the following:
Mounting and Attaching Products
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Cable Pulling Grips | Wire Grips | Cord Set Components

Multimedia Terminal Adapter suits multi-dwelling units.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:54 -0500

Featuring modular, embedded design, SURFboard® M-eMTA provides multi-line IP voice and high-speed data services for multi-dwelling units in one device. Platform enables simultaneous use of both phone line and computer, and support for services such as caller ID, call waiting, and call forwarding. Scalable system features interchangeable modules, allowing any combination of 2- or 4-line modules per unit, granting cable operators up to 48 lines within one unit.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Terminal Adapters

Gasketing Material produces moisture-resistant seals.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:45 -0500

Offered as one-part resin that requires no mixing, Ultra Light-Weld® GA-111 can be dispensed into intricate and complex configurations and cures within seconds. In-line curing capability promotes production speed, and viscosity allows for varying bead heights. This UV/Visible light-curable, form-in-place (FIP), soft gasket material adheres to metals while providing barrier to prevent absorption or penetration of air, dust, moisture, liquids, and gaseous substances.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Formed-In-Place Gaskets | Gasket Material

Damage Prevention Product absorbs transit induced forces.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Aug 2008 07:40:20 -0500

Designed to address issue of damaging parts during transportation operations, Ivy Shock Pillow© helps reduce impact forces associated with railcar coupling actions. Logistics damage prevention product absorbs transit induced forces, which are typically generated by cargo impacting the end walls of rail boxcars, trailers, or sea containers, before they can be transferred into cargo. It impedes transfer of kinetic energy from impact shocks.

This story is related to the following:
Mounting and Attaching Products
Material Handling and Storage
Safety and Security Equipment
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Railroad Equipment | Protection Equipment & Devices | Cargo Restraints | Industrial Shock Absorbers

Damping Hinges are adaptable for numerous applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:09 -0500

Targeting laptop computer, medical, aerospace, automotive, and other industries, Aluminum Damping Hinges can be used on applications where lid or panel needs to close with slow motion action. Corrosion resistant hinges allow for customization by adjusting length and diameter of shaft, making them adaptable to any size and weight application. Life cycles can exceed 35,000 uses, and spring can be added for quick release.

This story is related to the following:
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Mounting and Attaching Products

Search for suppliers of: Friction Hinges | Laptop Computer Hinges | Automotive Hinges | Aircraft Hinges | Corrosion Resistant Hinges | Aluminum Hinges

RF Connectors feature all-metal construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:08 -0500

Comprised of Type F, BNC, and RCA plugs, KCC Series coaxial connectors include cable assembly grip to ensure video signal, resolution, color, and audio accuracy. They are specified to connect RG59, RG6, RG6 quad shield, and mini RG59 cables in various applications. Manufactured of precision-machined brass, with heavy nickel plating, corrosion-resistant connectors feature gold-plated, semicaptive contacts and shielding for maximum isolation from EMI/RFI interference.

This story is related to the following:
Mounting and Attaching Products
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Coaxial Connectors | Compression Connectors | RF Connectors

Electronic Positioning System features digital controller.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Aug 2008 07:42:51 -0500

Designed for pneumatic vibration isolators, PEPS® II non-contacting Precision Electronic Positioning System helps improve isolator height control and settling time. Based on PEPS® technology, it eliminates mechanical height control valves and sensing linkage, reducing wear, eliminating particulate generation, and optimizing long-term position repeatability. Unit is compatible with all TMC pneumatic vibration isolation systems including Gimbal Piston(TM), CSP®, and MaxDamp®.

This story is related to the following:
Controls and Controllers
Mounting and Attaching Products

Search for suppliers of: Mechanical Controls | Positioning Systems

Steel Cube creates structures in laser-based applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Aug 2008 07:46:41 -0500

Constructed of all-stainless steel, PS-Q Pedestal Post Cube lets researchers mount PS Series Pedestal and Extension posts at 90° angle and create stable, multidimensional structures. Cubes are stacked and aligned onto posts using PS-Q-A thread adaptor that fits into either of 2 counterbores on cube. Thread adaptor enables cube to be rotated to same orientation as any of cubes below it while also providing threaded hole on top of cube for further stacking of posts or other cubes.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Mounting and Attaching Products

Search for suppliers of: Laser Accessories | Pedestals

EPDM Seal contains no animal-derived products.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Aug 2008 07:44:50 -0500

Addressing risks associated with animal-derived products used in manufacturing processes, EJ280-70 is completely free of animal ingredients and also meets USP Class VI requirements. Its construction eliminates concerns over possibility of transmitting Bovine Spongiform Encephalopathy (BSE), or Mad Cow Disease, through elastomeric seal.

This story is related to the following:
Mounting and Attaching Products
Materials and Material Processing

Search for suppliers of: EPDM or EPR O-Rings | EPDM Rubber

Hard/Soft Cable Connections offer high strain/bend relief.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:02 -0500

Reducing stress and strain from electrical conductors' termination points, hard/soft strain relief is engineered with anti-twist function as well as elimination of pistoning action of conductors inside cable jacket at termination point of assembly. It meets or exceeds straight pull test of its corresponding cable and connected assembly. Weighted 180° tick-tock flex tension testing achieves 750,000 cycles. Unit can be produced in PVC (and its alloys), polyurethane, and TPR.

This story is related to the following:
Mounting and Attaching Products
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Molded Strain Reliefs | Cable Assembly Connectors | Cable Connectors

Pharmaceutical Isolators offer built-in microbial protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:51:29 -0500

Compliant with USP 797 criteria, Esco Pharmacy Isolators, Negative Pressure Models provide safe and clean environment for compounding of hazardous, sterile drug preparations including antineoplastics and cytotoxics. They include ULPA filters and ISOCIDE(TM) antimicrobial coating on all powder coated surfaces that eliminates surface bacteria. Other features include digital airflow and pressure displays, and stainless steel interiors with coved corners.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Pharmaceutical Integrator Isolators | Pharmaceutical Isolators & Barriers

Wafer Loader can handle wafers as thin as 100 µm.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 31 Jul 2008 08:02:36 -0500

Using chuck system to transfer wafers and featuring optimized arrangement of sensor beams, NWL200 Series Wafer Loader achieves reliable loading for inspection of semiconductors. Wafer-slot buttons on front panel enable users to select specific wafer in any slot with touch of a button, while large LCD screen allows operators to set conditions and check operating status. Users can also program recipes and backup data from any PC when loader is connected to LAN.

This story is related to the following:
Test and Measuring Instruments
Mounting and Attaching Products

Search for suppliers of: Semiconductor Inspection Equipment | Wafer Handling Tools

Linear Guide Ball Bushings are optimized for smooth motion.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jul 2008 07:44:53 -0500

LG bushings employ rotation prevention function, where 4 rows of circular arc grooves are arranged on shaft, to ensure precision movement. Product is dimensionally interchangeable with linear bushing, as outer tube has same OD. Since outer tube and shaft are interchangeable, combination of outer tube and shaft may be selected. Tube OD ranges from 8-15 mm, with tolerances from 0 to -0.011, while tube lengths range from 12-30 mm, with tolerances from 0 to -0.2 and shaft ODs from 4-8 mm.

This story is related to the following:
Mounting and Attaching Products
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Bushings

Transport Mechanism moves large telescopic steel covers.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jul 2008 07:43:13 -0500

Designed for speeds from 98-262 fpm, Transport Mechanism for Telescoping Steel Covers eliminates high limit stop forces and corresponding noises in all operational positions, moving smoothly when covers are pulled apart as well as when they come together. Mechanically muffled unit travels on guides for stability. Since mechanism is not positively driven, it does not need to move entire mass. Depending on length of stroke, only boxes moved are those required for clearance.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Telescoping Covers

Aluminum Continuous Hinges are corrosion resistant.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 08:03:07 -0500

AL Series aluminum hinges are made of 3003 Series alloy and come in various widths in .040, .050 and .060 in. leaf thicknesses with .50 in. knuckles. Soft properties of alloy make it suitable for hinges being machined or put through secondary processes.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Continuous Hinges | Aluminum Hinges | Hinges | Corrosion Resistant Hinges

Accelerometer Magnet Bases offer high pull strength.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Jul 2008 08:47:29 -0500

Featuring 7/8 in. diameter, 2-pole Model B12 provides 20 lb of force, while 2-pole Model B13, measuring 1 in. in diameter, delivers 35 lb of force. Units are suited for walk-around data collection since attaching base allows vibration sensor to be moved from point to point. Bases have ¼-28 tapped hole that can accommodate variety of threaded stud adapter sizes such as M6, M8, 3/8, and 10-32 for compatibility with most industrial accelerometers.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Magnetic Bases

Clevis Hanger suspends mechanical piping systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Jul 2008 08:47:27 -0500

Available in 6 carbon steel models, Figure 1U Ultra Clevis Hanager features snap-open/snap-close design and accommodates pipe sizes ranging from ½-4 in. Clevis bottom locks in place to prevent swinging while it supports pipe's weight when hanger is in open position. Flared edges facilitate installation for all pipe types and protect CPVC pipe from abrasion.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Clevises | Pipe Hangers

Enclosure Extension Brackets require no assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jul 2008 08:49:34 -0500

Attached to face of enclosure, netSELECT® Extension Brackets extend cabinet door out 2 in. and enable enclosures to accommodate networking and A/V equipment installations that require heat dissipation. Welded units are designed with louvers on top and bottom panels as well as multiple knock-outs for cable entry/exit and to accommodate WiFi antenna attachment. Designed to hold variously sized components, brackets can be used with 14 or 18 in. high enclosures.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Electronic Equipment Brackets

Isolator Mounting Bases isolate sensors up to 1,500 V.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jul 2008 08:49:34 -0500

Measuring 1 in. across flats with 0.82 mounting pad, Models SF21 and SF22 accommodate up to medium diameter accelerometers and small diameter side-exit accelerometers. Models SF23 and SF24 are both 1 1/8 in. across flats with 0.94 in. mounting pad that can accommodate large diameter top-exit sensors. All have ¼-28 integral stud on accelerometer side, and are used to prevent voltage spikes from reaching sensor by electrically isolating it from case of machine.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mounting and Attaching Products

Search for suppliers of: Isolators | Electric Signal Isolators | Bases

Components provide sound damping and vibration resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:03 -0500

Suited for building of machinery and equipment, Urethane, Rubber, and Sponge Components come in round and metal plate-mounted versions as well as configurable block versions. Urethane and rubber bumpers feature round tips, and come in choice of solid or through-hole designs. With diameters, lengths, and through-hole sizes configurable in 1 mm increments, hundreds of sizes and shapes are available. Urethane blocks mounted on metal plates are offered in flat, V-shaped, and corrugated designs.

This story is related to the following:
Materials and Material Processing
Material Handling and Storage
Mounting and Attaching Products

Search for suppliers of: Damping Compounds | Vibration Dampeners | Machinery Vibration Absorbers