Image Industries, Inc.
Huntley, IL 60142
Jun 02, 2008 With SPC documentation feature, Smart Weld Digital Arc Stud Welding Equipment enables users to maintain quality control measures. By reporting information such as date and time, weld tool, mode, weld parameters, and weld results, users can determine whether quality standards are being consistently upheld. If weld falls outside programmed limits, Quality Control Documentation feature alerts user with error message. Once weld is complete, user can print out report of weld parameters.

ABB Robotics, Inc.
Auburn Hills, MI 48326
Jun 02, 2008 Under one interface, Production Manager® integrates all components of robotic welding system to increase predictability by eliminating local software or ad hoc code solutions. This middle-layer software facilitates set-up of interacting, dynamic components without writing new software code, reducing commissioning time and downtime after programmed or un-programmed stops. Installation wizard leads users along entire installation process.

American Torch Tip Co., The
Bradenton, FL 34203 5304
May 29, 2008 Available from 180-450 A, Tweco® Style Spitfire® guns include all replacement parts from front end to rear end. These parts include power pins for Tweco®, Miller®, and Lincoln®. Additionally, guns offer front end handle with hanger hook as well as Lightning® rear end assembly, spring guard, and handle. Other consumables include nozzles, contact tips, diffusers, and conductor tubes.

American Torch Tip Co., The
Bradenton, FL 34203 5304
May 29, 2008 Available from 200-500 A, Tweco® Style Spray Master® guns include all replacement parts from front end to rear end. These parts include power pins for Tweco®, Miller®, and Lincoln®. Each gun offers front end handle as well as Lightning® rear end assembly, spring guard, and handles. Other consumables include nozzles, contact tips, diffusers, and conductor tubes.

Weldcraft
Appleton, WI 54911
May 28, 2008 Offering 200 A capacity, water-cooled Model WP-25 has flexible neck that bends in any direction, helping operators gain access to difficult joints or confined areas. Pencil-style torch features lightweight body to optimize operator comfort. Various accessories include cable covers that help protect against worksite damage, extension kits, and power cable adaptors.

Gateway Safety, Inc.
Cleveland, OH 44131 1045
May 28, 2008 To help maintain clear vision, Wheelz(TM) features Whirlwind(TM) ventilation system, which minimizes fogging by circulating air through optical chamber. It comes in various one-piece lens options, clear, clear anti-fog, gray, gray anti-fog, silver mirror, silver mirror anti-fog, blue mirror, blue mirror anti-fog, and dark green 3.0 or 5.0 IR filter shades for light welding applications. Eyewear with compact, lightweight frame meets ANSI Z87.1+ standard and offers 99.9% UVA and UVB protection.

Bernard Welding Equipment
Beecher, IL 60401
May 27, 2008 Rated to 350 A at 60% duty cycle, Dura-Flux self-shielded welding gun accepts flux-cored wire up to 3/32-in. and can be configured with direct plugs for wire feeders outfitted with Tweco 4 and Euro gun connections. Unit includes non-metallic trigger that minimizes heat absorption during welding, trigger guard for maneuverability in confined areas, and sealed microswitch that keeps out dust, dirt, and other contaminants.

GE Sensing
Billerica, MA 01821
May 21, 2008 Weld profile visualization system delivers online, real-time picture of scarfed ERW pipe IDs and ODs during manufacturing process. By identifying events such as tool drift and edging as they occur, system makes it is possible to affect real-time control of scarfing process and reduce scrap. Ultrasonic phased array transducer electronically simulates scanning action required to provide weld profile information, and resulting information is fed into UTxx digital flaw detection platform.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
May 20, 2008 Offering Dynamic Display(TM) LCD screen for viewing adjustable parameters with single control knob for scrolling, Invertec® V310-T AC/DC handles stick, basic TIG, and AC/DC TIG pulse welding operations. Portable, lightweight welder allows users to customize arc through adjustable AC frequency and selectable waveshapes. Options include smart water cooler system, which digitally controls speed of water cooler's 3-phase pump motor based on coolant temperature.

Rofin-Baasel Inc.
Boxborough, MA 01719
May 09, 2008 Featuring working envelope of 1,500 x 2,000 mm and typical indexing times under 50 ms between weld stitches, Remote Welding System (RWS) uses CO₂ slab laser system mounted above working area, on gantry, with laser beam delivered via mirrors. Complete system is enclosed by perimeter safety guarding and can operate continuously on 3-shift pattern. Approximately 20 million welding cycles, equating to more than 300 km of weld joint, can be generated without replacing any wear parts.

Herrmann Ultrasonics, Inc.
Bartlett, IL 60103
May 07, 2008 In addition to welding water- and air-tight seams, ROTOSONIC Machine can be equipped to cut fabric while sealing cut edge to prevent material from fraying or unraveling. Rotary Sonotrode and rotating anvil wheel prevent material drift and bulking during bonding process. Utilizing ultrasonic technology to actuate Ultrasonic stack at 30 kHz with up to 1,200 W, machine is suited for welding medical blankets, boat covers, tents, outdoor wear, and protective clothing.

Stoody Co.
Chesterfield, MO 63017
May 06, 2008 Stocked in popular sizes, including 308L, 309L, and 316L, 300 Series Flux-Cored Arc Welding (FCAW) Gas Shielded Wire comes in flat and horizontal versions as well as all position welding grades. All feature environmentally friendly wire basket and random wound wire, which lends to optimized deposition rate with minimal labor.

Arcos Industries, LLC
Mount Carmel, PA 17851
May 06, 2008 Capable of handling welding applications where superior seawater corrosion resistance is required, Arcos 803 (ECuNi) is covered electrode designed for shielded metal arc welding of wrought or cast 70/30, 80/20, and 90/10 copper-nickel alloys. It is also utilized to weld clad side of copper-nickel clad steel. Arcos 803 is suited for desalination plant, offshore construction, and marine environment welding applications.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
May 02, 2008 SelectAlloy 307EU-C produces weld deposit that is resistant to hot cracking, and features stable arc transfer that transitions into spray and maintains ability to bridge gaps. Unit delivers consistent deposit composition due to even distribution of core ingredients. It is suited for welding automotive exhaust systems, especially when joining austenitic stainless to ferritic stainless or carbon steel, ferritic to ferritic stainless or other dissimilar metals within exhaust system.

Unitek Miyachi Corporation
Monrovia, CA 91017 7133
Apr 28, 2008 Advanced Dual Pulse (ADP) welder features current monitoring, programmable pulse polarity, high repetition rates, and 4 selectable pulse width durations. Uupslope function can be programmed to gradually increase weld energy to alleviate weld splash. Incorporating 6.5 in. high resolution color display that shows monitored current values, weld limits, weld counters, and squeeze/hold times programmed for each weld schedule, unit also comes in 100 and 300 W versions.

Hobart Brothers Co.
Troy, OH 45373-2900
Apr 11, 2008 Providing high impact properties at temperatures as low as -50°F, Hobart® 418 (AWS E7018-1 H4R) low hydrogen stick electrode produces spatter-free arc and creates flat weld bead profile with fine rippled finished appearance. To minimize post-weld cleaning, Hobart 418 features removable slag that in many cases is self-peeling. With weld puddle that washes into sidewalls without undercutting, electrode is available in 10 and 50 lb hermetically-sealed cans and 5 and 10 lb P-Paks.

Arcos Industries, LLC
Mount Carmel, PA 17851
Apr 04, 2008 Arcos 392 (ERNiCrFe-6) is intended for cladding steel with nickel-chromium-iron weld metal and for joining steel and stainless steel to nickel-base alloys. Weld deposits can be age-hardened with degree of hardness depending on time and temperature. Alloy is suited for welding in cryogenic and elevated temperature (up to 1,800°F) environments such as power generation plants, petrochemical facilities, and furnace equipment.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Apr 04, 2008 Suited for offshore platform construction, earthmoving/mining machinery, and shipbuilding, Select 820-Ni2 flux cored wire is intended for welding of carbon and ASTM A572/A575/A734 steels, which require v-notch toughness and tensile strength in 80,000-100,000 psi range. Producing weld deposit with 2.2-2.5% nickel, it features slag constituents for puddle control, fast freezing characteristics to facilitate welding in all positions, and smooth spray arc transfer with minimal spatter.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Mar 24, 2008 Designed for construction fleets, small contractors, and pipe welding applications, PRO 300 provides 20-410 A of welding power, as well as 12,000 W of peak generator power. Single circuit board is housed in sealed environment, protected from heavy industrial applications. Digital voltage control enables operators to pre-set and maintain voltage, while Lift-Arc function creates consistent and positive arc starts, and Auto-Stop function allows welder to break arc without flaring.

Crafford-LaserStar Technologies
Riverside, RI 02915
Mar 24, 2008 Offering alternative to microscope GTA welding, 7700 Series Welding System can lay beads as small as .0025 in. making it suited for plastic injection mold, tool, and die maintenance and repair. System can repair slots, pockets, radius contours, and angles as well as polished, engraved, and textured surfaces. It also repairs thin walls with little or no warping. Suited for tool steel, aluminum, copper, titanium, and powdered metals, welder minimizes handwork required before polishing.