Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Aug 06, 2008 Providing 10,500 W of generator power and up to 225 A of welding output, gas-engine driven Bobcat 225 features fully enclosed case, which directs hot air away from engine for cooler operation, ensuring full output, even in hot weather or when it is mounted in confined space with restricted airflow. Generator is available with Kohler 23 hp or Subaru/Robin 22 hp gas engine and is suited for MRO, farm and ranch, construction, and truck-mounted applications.

Sonobond Ultrasonics
West Chester, PA 19380
Aug 01, 2008 In addition to rotating head with circular welding disk, MS-5010B Foil Splicer(TM) Modular System is available with 110 or 220 V solid-state power supply that features automatic frequency control. It can be integrated into suitable production systems and can be used by solar panel manufacturers to weld aluminum strips to thin conductive metal layer deposited onto photovoltaic modules. Unit can also be used for clean splicing of aluminum and copper foils.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 01, 2008 Featuring smooth, even burn-off, easy re-strikes, and clean weld puddle, Excalibur® 7028 is designed for structural fabricators working with high depositions in flat and horizontal positions. Intended for ship and bridge structures, storage tanks, and general heavy fabrication, it exceeds AWS specifications for impact properties at temperatures below required 0°F. Arc characteristics give welders ability to deposit fillet and lap welds without undercutting.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 01, 2008 Power MIG 215XT is spool gun ready and handles light-duty aluminum applications. Toggle switch allows Magnum 100SG spool gun or push gun operation. Power MIG 255XT, designed for MIG and flux-cored welding, has 4-step interlock, spot mode, adjustable run-in speed for smooth arc starting and adjustable burnback time to minimize sticking in puddle. It is offered with 115-volt auxiliary power. MAXTRAC® wire drive features dual-driven rolls and easy-turn numeric tension indicator.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 01, 2008 Suited for rugged onsite welding applications, Ranger® 225 GXT welder generator handles basic welding jobs with 225 A/25 V welding output for stick, TIG, MIG, and flux-cored welding as well as arc gouging. AC/DC welding output is designed for range of stick electrodes, such as Lincoln Electric's Excalibur® 7018 (AWS E7018) and Fleetweld® 5P+ (AWS E6010). Generator offers 10,500 W peak single-phase ac generator power to meet high frequency needs, such as powering plasma cutter.

Kimball-Midwest
Columbus, OH 43228
Jul 28, 2008 Protecting materials by reducing heat transfer during soldering, brazing, welding, and open flame contact, Therma-Shield Heat Protection Paste eliminates disassembly of valves and other components. It can be applied to almost any surface or material, and conforms to irregular shapes and surfaces to provide total coverage and protection. Product is non-flammable, non-toxic, non-corrosive, and biodegradable, and helps eliminate waste as it can be applied only where needed.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Jul 11, 2008 Featuring auto-darkening response time of 1/20,000 of 1 sec, Vintage USA helmet is stylized with 1929 Miller Logo, bald eagle, crest, US Flags, and patriotic stars. Elite version provides Auto-On/Auto-Off and Grind Mode in addition to 5 outside and 2 inside replacement cover lenses, fatigue-reducing comfort cushion, and helmet bag. Digital Elite includes programmable grinding, welding, cutting, and electromagnetic modes. Latter is used when arc is present but sensors are obscured.

Arcos Industries, LLC
Mount Carmel, PA 17851
Jul 09, 2008 Suited for automatic or semi-automatic welding, Arcos 651 commercially pure nickel wire welds ductile, malleable, and grey cast iron using gas metal arc, gas tungsten arc, and submerged arc processes. Arcos 861 provides corrosion resistance, particularly in alkalis, and is utilized for welding wrought and cast forms of commercially pure nickel. Both are capable of handling dissimilar welding applications.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Jul 09, 2008 SelectWear 60HC and SelectWear 60PW chromium carbide, metal-to-earth wear electrodes suit applications up to 1,100°F. Designed to deposit alloy composed of high density of primary chromium carbides in iron matrix, SelectWear 60HC can be used for demanding welding applications. Suited for single and double pass overlay welding utilized in plate applications, SelectWear 60PW deposits alloy composed of higher density of primary chromium carbides and higher hardness than 60HC.

Tregaskiss, Ltd.
Oldcastle, ON N0R1L0  Canada
Jul 02, 2008 Designed for thru-arm robotic welding systems, TOUGH GUN(TM) ThruArm(TM) Series robotic guns with LSR Unicables is available as complete package for both clutch and solid-mount robotic systems. At 100% duty cycle, they provide 500 A air-cooled capacity with CO₂ and 350 A with mixed gases, based on NEMA standards. LSR Unicables include rotating power connection to relieve stress caused by routine torsion and protective conduit to shield cable components from harsh welding environments.

Hobart Brothers Co.
Troy, OH 45373-2900
Jul 01, 2008 Available in 1/8 or 5/32 in. diameter and 14 in. length, Hobart® Deckmaster(TM) 1139 welds through galvanized, painted, plated, or mildly dirty roof decking. Mild steel stick electrode conforms to AWS A5.1 and produces uniform spot welds with complete penetration. It offers optimized strike and re-strike capabilities to limit rework, as well as low spatter levels and light slag for minimized clean up.

Gullco International Inc.
Cleveland, OH 44146
Jun 27, 2008 Equipped with 40 ipm welding carriage, PIPE KAT® Automated Pipe Welding System features linear oscillator with adjustable weave width and weld joint centerline adjustment. All electronic motorized functions incorporate jog settings. Supplied with main control box with 12 ft umbilical, 27 ft of gas hose, and ground cable, system offers wire feed spool capacity of 10 lb, maximum wire speed of 720 ipm, and wire size range of 0.8-1.4 mm.

Coxreels
Tempe, AZ 85283-4323
Jun 24, 2008 Intended to protect cable and enhance safety of work environment, 112WCL Series 12 in. hand crank welding cable reel features heavy-duty, all-steel construction and bronze, self-lubricated spherical bearings at each end of drum. Integrated drag brake/reel stop prevents free-wheeling and cable uncoiling during storage and transport, while Cable Keeper prevents pigtail from whipping or twisting. Reel handles up to 100 ft of 2/0 Gage welding cable.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Jun 19, 2008 Suited for offshore, pressure vessel, shipbuilding, and structural fabrication industries, Lincolnweld® 888(TM) flux meets AWS H4 requirements for low diffusible hydrogen levels under 4 mL/100 g of weld metal. Designed for low alloy and mild steel as-welded and stress relieved applications, it can handle up to 5 welding arcs. Available in moisture resistant packaging, unit can remove slag from deep grooves and narrow gaps, and has cap-pass impact properties.

Hobart Brothers Co.
Troy, OH 45373-2900
Jun 12, 2008 Available with U.S. flag or tribal flame designs, entry-level Non-Auto Darkening Helmets feature No. 10 fixed-shade lens measuring 4.5 x 5.25 in. Large window is suited for hobbyists, farmers, and home mechanics that occasionally perform stick, MIG, flux-cored, and TIG welding.

Sumitomo Electric Carbide
Mount Prospect, IL 60056
Jun 11, 2008 PcBN premium grade BNC300 includes PcBN substrate combined with TiAIN ceramic gold coating, which results in extended tool life in interrupted turning applications. Machine's cutting edge is further strengthened through incorporation of brazing technology with all corners being brazed individually.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Jun 06, 2008 Utilizing microalloying and special fluxing ingredients to produce optimal CVN toughness, Select 71 Supreme promotes deposition rates and welder appeal through reduced fume emission and spatter levels as well as fast-freezing slag. This gas-shielded, tubular, flux-cored wire is designed for welding carbon steels requiring 70,000 psi. It also suits welding operations where the following steels may be employed: ASTM A131, A285, A515 Gr 70, and A516 Gr 70.

Hobart Brothers Co.
Troy, OH 45373-2900
Jun 05, 2008 For applications requiring impact toughness, arc stability, and minimal spatter, Tri-Mark® TM-811N1 features fast-freezing, easily removed slag. This gas-shielded wire, classified under AWS code E81T1-Ni1CJ H8 and E81T1-Ni1 MJ H8, can weld in all positions with either 100% CO2 or 75% Argon, 25% CO2 mixture. Designed for mining, earth moving, and petrochemical equipment, product comes in .045, .052, and 1/16 in. sizes and exhibits impact values up to 121 ft lb at -40°F.

Arcos Industries, LLC
Mount Carmel, PA 17851
Jun 04, 2008 Designed for welding nickel-copper alloys (ASTM B127, B163, B164, and B165), Arcos 816 (ERNiCu-7) electrode can be used for welding in salt, seawater, and reducing acids environments. Dissimilar welding applications include joining nickel-copper and copper-nickel alloys to Nickel 200. Developed for GTAW/GMAW overlay of nickel-chromium alloy onto carbon and stainless steel and for cast repair, Arcos 72 (ERNiCr-4) offers resistance to high temperature and fuel-ash corrosion.

ESAB Welding & Cutting Products
Florence, SC 29501
Jun 03, 2008 Suited for MIG, DC TIG, and stick electrode welding, MultiMaster® 300X is optimized for use with Dual Shield X series wire. It utilizes Super Switch(TM) technology with high-speed solid-state power control and includes output preset control with 2 digital meters that allows setup from Dual Shield X series quick setup card. DC welding output is from 15-300 A at 40% duty cycle. System includes .045 and .052 in. dia wires and 400 A, 15 ft gun setup for same diameters.