Thermadyne Industries, Inc.
St. Louis, MO 63017
Aug 29, 2007 Autocraft(TM) 70S-6 solid MIG wires are AWS ER70S-6 wires available in 2, 11, 33, and 44 lb spools as well as 550 and 830 lb drums. Packaged in heavy-grade colored corrugated cardboard, 2 and 11 lb spools are designed for point of purchase sale and display. Spools, which are layer level wound and constructed of ABS plastic, are distinctly marked with clearly labeled specifications and safety information.

Bernard Welding Equipment
Beecher, IL 60401
Aug 24, 2007 Accepting flux-cored wire up to 3/32 in., self-shielded Dura-Flux(TM) Gun features non-metallic trigger that absorbs less heat than metal triggers. Trigger also has sealed microswitch, which keeps out dust and dirt. Gun is equipped with heavy-duty monocoil power cable, Centerfire(TM) contact tips, and interchangeable power pins and trigger leads for compatibility with both Miller and Lincoln products. Power pin liners are changed without tools to facilitate maintenance.

Reelcraft Industries Inc.
Columbia City, IN 46725
Aug 22, 2007 Including external swivel for added safety that reduces likelihood of fire hazard resulting from gas leak, Model STW3450 OLP welding cable reel holds 50 ft of ¼ in. twin welding hose for use with oxygen/acetylene gasses. Features include snap ring that exposes seals if they require replacement, UV-stabilized polypropylene outer casing that is corrosion, acid, and alkali resistant, and high-grade spring steel drive spring.

Hobart Arc Welders
Flint, MI 48505
Aug 21, 2007 Offering 25-210 A of welding power in 77 lb package, Handler® 210 can weld mild steel up to 3/8 in. and aluminum up to ¼ in. Low-end control enables welding 24-gauge material without burn-through or excess spatter, while 7 voltage taps and infinite wire feed speed control enable arc adjustments to be made in fine increments. Plugged into 230 Vac outlet, unit delivers full output power with normal 35 A breaker and provides arc control for welding thin or thick metal.

Valtra, Inc./Good Hand, Inc.
Pico Rivera, CA 90660
Aug 17, 2007 Weighing 46 lb, NOMAD(TM) Economy Welding Table features 30 x 20 in. steel tabletop that tilts to horizontal, 30°, and folded positions. Three 1.1 in. slots allow clamps to be inserted at any point, so user can fully utilize entire tabletop. Two retractable, perpendicular steel guide rails can be used as guides, stops, or as clamping edges. For portability, table includes 2 casters and pull handle.

Swagelok Company
Solon, OH 44139-3492
Aug 17, 2007 Featuring 316 SS construction, multipurpose SK Series is available in ¼ in., 3/8 in., 6 mm, and 8 mm sizes. Spring-loaded seats and floating ball provide leak-tight integrity in both low- and high-pressure systems while minimizing wear. In addition to manual actuation, valves are offered with standard Swagelok or ISO 5211-compliant rack-and-pinion pneumatic actuators. Valves are rated for working pressures to 6,000 psig and temperatures from -40 to 302°F.

Hobart Brothers Co.
Troy, OH 45373-2900
Aug 16, 2007 Designed for AC, DCEN, or DCEP welding, Rocket 7024 mild steel stick electrodes are available in 1/8, 5/32, 3/16, 7/32, and ¼ in. diameters. Units meet AWS E7024 requirements for horizontal fillet and flat-position electrodes and offer minimum tensile strength of 70,000 psi. In addition to producing low spatter levels, electrodes weld through moderate amounts of dirt and rust, while achieving smooth, flat weld bead profile.

NanoSteel Company
Providence, RI 02903
Aug 09, 2007 Featuring refined crystalline microstructure, SHS 9700 exhibits hardness up to 69 Rc without use of nickel, molybdenum, or tungsten. This hardfacing and wear plate welding material is offered in range of cored-wire diameters suitable for MIG/Open-Arc/Submerged-Arc applications and as atomized powder for PTA applications. It helps extend service life of critical parts and components on ground engaging tools and materials processing equipment.

Arcos Industries, LLC
Mount Carmel, PA 17851
Aug 06, 2007 Arcos 382 is used for welding of alloys 600, 601, and 800 to themselves; for clad side of joints in steel clad with nickel-chromium alloys; and for dissimilar welding of nickel-based alloys. Designed to withstand pitting corrosion and stress-corrosion cracking in chloride containing environments, alloy is suited for use in desalination plants. It provides high-strength, resistance to oxidation, and delivers creep-rupture strength at elevated temperatures.

Unitek Miyachi Corporation
Monrovia, CA 91017 7133
Jul 26, 2007 Housed in NEMA-style enclosure, Model ISA-4000CR features 5 feedback modes, built-in weld monitoring, communications package, and force control option. High current resistance welding provides high-integrity joints of connectors, fasteners, and subassembly pieces, and can replace slower joining technologies, such as brazing and arc welding.

Weldcraft
Appleton, WI 54911
Jul 20, 2007 Comprised of 5 models, handheld WP-26 series is manufactured with heavy-duty copper materials and rated to 200 A DC or 150 A AC at 60% duty cycle. Optional gas control valve on handle lets welders tune in ideal gas flow, while optional flexible neck adjusts to any angle. Able to accept tungsten electrodes from .020-5/32 in., continuous-duty products are also available with pencil-style torch for confined joints or automated applications.

TAK Enterprises, Inc.
Bristol, CT 06010 7400
Jul 19, 2007 Suited for wire and narrow strip applications, feed and cut-off system comes with controller that incorporates 5¾ in. industrial touchscreen. Pro-Pack option enables remote operation/monitoring, and throughput rate is controllable via programmable speed setting capability. Along with direct reading for parts/min run speed indication, Ethernet-expandable system offers password protection for sensitive program areas, batch cutting ability, as well as time- or sensor-controlled cutting.

North Safety Products, Inc.
Cranston, RI 02920
Jul 11, 2007 Suited for use when welding alloys or exotic steel, Model 75FFP100NL is NIOSH approved flexible filter offering P100 protection and 3-in-1 nuisance-level odor relief from organic vapors, acid gases, and ozone. Designed to fit under welding helmets and faceshields, filter can be combined with 7700 half mask to provide low breathing resistance and to reduce worker fatigue.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Jul 10, 2007 Suitable for multiple pass applications, SelectWear 50 consists of open arc, medium chromium carbide alloy with weld deposit that exhibits resistance to moderate wear and impact. Unit's deposit stress relieves itself by crack checking. Designed to deposit martensitic alloy similar to H12 tool steel, SelectWear 52W is available in gas-shielded or open arc version. It offers resistance to high compressive loads as well abrasion resistance and hardness without stress relief crack checking.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Jul 09, 2007 Millermatic(TM) DVI2(TM) (Dual Voltage Input 230/115 V), 212 (210 amps @ 30% duty cycle), and 252 (250 A @ 40% duty cycle) feature angled dual-gear drive system with spring-loaded drive roll assembly for facilitated wire changes, tool-less drive roll changeover, drive roll storage, and smooth wire feeding. EZ-Change(TM) cylinder rack allows operators roll gas cylinders on and off. Design also facilitates switching between steel and aluminum applications.

Arcos Industries, LLC
Mount Carmel, PA 17851
Jul 09, 2007 Available in 3/32, 1/8, 5/32, and 3/16 in. diameters, Arcos 9N10 is designed to weld base metals such as ASTM B127, B163, B164, and B165. It is primarily used for welding nickel-copper alloys to themselves and to steel, but can also be used for cladding steel joints with nickel-copper alloy and for surfacing steel with nickel-copper weld metal. Offering corrosion resistance, Arcos 9N10 is suited for use in salt, sea water, and reducing acid environments.

Northwest RF Corp.
Bensenville, IL 60106
Jul 03, 2007 RF Sealers, Weldpro 12 and Weldpro 25, adapt to changing needs and offer options from standalone base units to fully automated lines. Manual and automatic working modes can be adjusted via touchscreen LCD, which interfaces with PLC and provides feedback, product count, and self-diagnostics. Other features include programmable setups, quick die changer, and infinitely adjustable power output. Both models offer auto-tuning feature and multi-layered arc suppression.

ESAB Welding & Cutting Products
Florence, SC 29501
Jun 14, 2007 Dual Shield X-Series provides welders with wide range of operating parameters including high deposition rates, fast travel speeds, flat bead profile, limited spatter, and slag removal. It includes wires for use with CO₂ or mixed gases, and wires for flat, horizontal, and all-position welding. Wires meet requirements for multiple weld procedures ranging from general fabrication to critical welding applications, and can be used in civil construction and ship building.

Arcos Industries, LLC
Mount Carmel, PA 17851
Jun 07, 2007 Offering corrosion resistance in harsh conditions, Arcos C-276, available in both wire and covered electrode versions, is suited for welding nickel-chromium-molybdenum base metal to itself, steel, and other nickel-based alloys. Covered electrode is also utilized for cladding steel. Generally used with ASTM B574, B575, B619, and B626, wire is suited for pipelines, pressure vessels, chemical processing plants, offshore oil and gas facilities, and marine environments.

Torch Wear
Twinsburg, OH 44087
Jun 06, 2007 Featuring 3-layer design that encapsulates armor material to provide protection, X-Treme welding sleeves are suited for harsh applications such as carbon-arc, sub-arc, spray-arc, and heavy-arc welding, as well as pipe and heavy TIG welding and MIG welding. They are made of fire retardant fabric that contains oxidized polyacrylonitrile fiber with Aramid strengthening agent, and does not char or shrink when exposed to heat. Designed to fit everyone, sleeve can be worn over shirt/jacket.