Malcom Co., Inc. (Distributor of LEISTER Hot Air Tools)
Tiverton, RI 02878
Nov 09, 2007 Suited for PE, PP, and PVDF pipes, Hurner Electrofusion Welding Unit includes intuitive user menu, LCD display, electrodes, and bar scanning probe that automatically sets up welding parameters and identifies pipe, fittings, and welder. Unit monitors welding process to detect errors such as heater coil shorts or power supply failure, and can record up to 1,800 welds in memory. Operating on 110/230 V, welder handles pipe fittings up to 28 in. dia.

Servore America
South Weymouth, MA 02190-1310
Nov 09, 2007 Manufactured by using UV/IR filters and LCDs, Servore Autolift welding helmet ensures safety of welders, and eliminates need to carry extra shield for grinding and chipping. Cartridge can switch at up to 1/25 thousandths of a second, while ADF uses Brilliant Clear(TM) technology to enable welders to get clear view of their work under almost any conditions. Helmet is independently tested to ANSI and Canadian Standards.

Arcos Industries, LLC
Mount Carmel, PA 17851
Nov 07, 2007 Arcos 2216 (ERNiFeMn-CI) is developed for all position gas metal arc, gas tungsten arc, and high speed automatic gas metal arc welding of nodular, grey, spheroidal graphite, and malleable cast irons to themselves or to other materials including stainless steel, carbon steel, and various nickel alloys. It is used in welding high strength cast irons, automotive exhaust systems, and catalytic converters.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Oct 26, 2007 All-in-one system comes with everything necessary to weld 4000- and 5000-series aluminum: Millermatic 350P MIG/Pulse MIG welder; 25 ft, air-cooled XR(TM)-Aluma-Pro(TM) gun; reversible .035-3/64 in. u-groove drive rolls; and Teflon intermediate guide. Millermatic 350P offers pulse programming, and calibration software syncs motor speeds in gun and power source for optimal feeding. Tension setting on XR-Aluma-Pro eliminates wire-feeding problems and erratic arcs.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Oct 25, 2007 With auto-darkening Digital Elite(TM) Helmets, users can switch between Welding, Cutting, Grinding, and X-Mode while retaining preferences for shade, sensitivity, and delay. X-Mode electromagnetically senses arc, providing full protection for those instances when arc is present, but sensors are obstructed. It also eliminates interference from sunlight and out-of-position welding angles. Weighing 18 oz, helmets include Auto-Off feature and have 4 arc sensors that respond in 1/20,000 sec.

Construction Forms, Inc.
Gardena, CA 90249
Oct 15, 2007 Operating in pressures equal to 660 ft of vertical load, 5 in. high-pressure Shut-Off Valve is hydraulically controlled, with controls mounted on valve frame. Valve features Hevi-Duty(TM) weld ends, 2 hydraulic cylinders, and double seals with operational resistant hardened metal-on-metal. Weighing 274 lb, steel unit has 23 x 8 in. footprint and is 35 in. high. Device allows control over flow of concrete when pumping in high-pressure applications.

Unitek Benchmark
Goffstown, NH 03045
Oct 15, 2007 Lid alignment and tack welding station includes precision slide which allows for separate alignment and tacking positions. It also features Model ADP100 Weld Power Supply and Series 88 Weldhead for repeatable process results. Finger proximity switches trigger weld head movement and ensure operator safety, while tooling pins on slide platform enable changeover to different part holding fixture.

Arcos Industries, LLC
Mount Carmel, PA 17851
Oct 12, 2007 Available in bare wire and covered electrode versions, Arcos C-22 is primarily used to weld nickel-chromium-molybdenum to itself, to steel, to other nickel-base alloys, and for cladding steel with NiCrMo weld metal. Arcos C-22 (ERNiCrMo-10) bare wire and Arcos C-22 (ENiCrMo-10) covered electrode are designed for welding broad range of industrial applications such as petroleum, chemical, and power generation plants as well as offshore and marine facilities.

Stoody Co.
Chesterfield, MO 63017
Oct 03, 2007 Available as 7/64 in. open arc welding wire, Stoody® 160 DM Nickel Tungsten Carbide Hardfacing Wire features evenly dispersed macro crystalline particles supported by nickel, silicon, boron matrix. Packaged on 50 lb poly spool, wire is suited for process pipe ID cladding, oil field stabilizers, and various types of earth cutting drill bits.

WeldComputer Corp.
Troy, NY 12180
Oct 01, 2007 Suited for use in mash seam welding applications, 2 high-power WeldVerter(TM) Power Supplies feature WeldComputer® Adaptive Weld Controls. Each inverter can deliver up to 800 A continuous welding current at 1 kHz frequency and is able to operate in current, voltage, and power feedback modes. Monitoring all key welding parameters, system detects variations in process that could negatively affect weld quality and takes preprogrammed action to accommodate out-of-limits condition.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Sep 26, 2007 Designed for those who perform occasional aluminum welding, Spoolmate 100 Series plugs directly into Millermatic® 140, Millermatic 140 with Auto-Set(TM), or Millermatic 180 MIG welder without requiring separate control box. Recessed contact tip and clear spool cover help reduce number of burnbacks, while dual V-knurled drive rolls ensure consistent feeding of aluminum. Unit comes with 12 ft gun cable and lets users adjust drive roll tension to match wire being used.

Bug-O-Systems, Inc.
Pittsburgh, PA 15204-1899
Sep 19, 2007 Equipped with dual drive system, power source storage, and heavy-duty flux recovery system, BGW Series is applicable for inside and outside welding of bottom-up or jack-up constructed single or double wall storage tanks. Self-propelled, submerged arc welding system can cut field storage tank welding time and minimize weld defects.

Weldcraft
Appleton, WI 54911
Sep 14, 2007 Available with configurable torch head options, hand-held, air-cooled Model WP-150 is rated at 150 A DC or 105 A AC, while Model WP-200 is rated 200 A DC and 150 A AC. Both have flexible neck that can be adjusted to reach most angles, making them suited for welding operators that encounter multiple joint configurations or joints with limited access. Ribbed handle remains cool after prolonged use, while copper head and coil assembly optimize cooling capacity.

Iowa Mold Tooling Inc.
Garner, IA 50438
Sep 11, 2007 Available on Dominator® Mechanics Trucks, 45 cfm CAS2545 compressed air system is hydraulically driven with max operating pressure of 150 psi. Single-stage, pressure-lubricated rotary screw compressor is suited for air tools, tire service, sandblasting, and painting. Offered in gas- or diesel-powered models, welder/generators are provided by Miller Electric. Optional drawer sets are available in 13, 26, and 39 in. widths and utilize 250 lb slides.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Sep 07, 2007 Suited for welding steel mill caster and idler rolls, SelectWear 420-S submerged arc electrode provides resistance to hot wear, fire cracking, and corrosion, while SelectWear 423-S martensitic stainless steel electrode is used to weld steel mill caster and table rolls, and features resistance to thermal fatigue, corrosion, wear, and high hot hardness. Zucaro-O self-shielded electrode is specifically designed to weld sugar cane crusher rolls.

Arcos Industries, LLC
Mount Carmel, PA 17851
Sep 06, 2007 Available in bare wire and covered electrode versions, Arcos 617 is primarily used for welding nickel-chromium-molybdenum base material as well as joining dissimilar high-temperature alloys. Providing oxidation resistance above 1,500°F, bare wire Arcos 617 is designed for TIG, MIG, and submerged arc welding. Covered Arcos 617 offers oxidation resistance up to 2,100°F and is designed to withstand pitting corrosion and stress-corrosion cracking.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Sep 06, 2007 Rated for welding at 300 A/100% duty cycle, Model XR-Aluma-Pro(TM) gooseneck-style air-cooled MIG gun optimizes feeding performance for 4000 and 5000 series aluminum through 2-position tension control, while water-cooled unit is rated for welding at 400 A/100% duty cycle. Both feature 3¾ turn potentiometer for wire feed speed (WFS) control that can be adjusted while wearing welding gloves, self-seating head tube that allows access to tight spots, and replaceable feed cable liner.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Sep 04, 2007 Syncrowave® 250 DX and 350 LX feature low-end DC TIG arc starting capabilities that help prevent burn-through when welding thin metal. While use of 1/6 in. or smaller diameter tungsten electrode is recommended for low-amperage arc starts or welding thin materials, power source's arc starting circuit also provides positive arc starts with 3/32, 5/32, and 1/8 in. dia tungsten. Other features include Coolmate® 3X cooler, universally compatible with any torch.

co-ax valves inc.
Penndel, PA 19047-5259
Aug 31, 2007 Integrating adjustable bypass flow control, Coaxial Valves feature PowerTube(TM) technology built into each valve in PCS-1 15 manifold array. This feature is suited to applications that require constant coolant flow, even if valves' primary port is closed. Each valve module can be customized to accommodate multiple pressures, separate control and bypass protocols, and different media, all handled by one manifold arrangement.

Image Industries, Inc.
Huntley, IL 60142
Aug 29, 2007 Supplied with standard legs, foot, and cable, Contact and Gap Stud Weld Tools each have stud range capacity of 14 gauge through 3/8 in. Lightweight, ergonomic design minimizes operator fatigue and is compact enough to fit in tight weld areas. Gap model generates gap distances automatically and does not require user to preset gap or lift mechanism manually. Compatible with most stud welding power supplies, contact tool includes LED indicator for visual feedback on heat settings.