PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Sep 12, 2007 Featuring adjustable temperature, pressure, and flow rate alarms, 1.5 ton Refrigerating/Heating Chiller provides heating and cooling for semiconductor fabrication processes. Integral 7,500 or 9,000 W heater controls temperature during vacuum chamber or reaction vessel heating, soaking, and cooling cycles. From 5 to 90°C, with ±0.5°C temperature stability, chiller provides up to 6,328 W of cooling. Its ¾ or 1 hp turbine pump accommodates various process flow and pressure requirements.

Jeio Tech, Inc.
Des Plaines, IL 60018
Sep 06, 2007 Available in variety of models with capacities from 3.5-20 l, Lab Companion Water Baths offer temperature to 100°C with accuracy of ±0.1°C. Bath chambers are constructed of stainless steel to allow use of water or silicone fluids. Baths include programmable time setting with delayed start and stop, 3 memory settings for temperature, and agitating system for temperature uniformity. For safety, units have over-temperature limiters and alarm indicators.

Intertec Instrumentation
Milton, ON L9T5A6
Aug 30, 2007 Suited for hazardous areas, Programmable Smart Heater can be fitted with elements capable of outputs from 500 W to 2 kW, making it suited for applications up to 300°F. It includes digital PID controller, as well as RS485 serial networking interface for programming and to network heater to PC for monitoring and diagnostic purposes. Approved for worldwide use by IEC, ATEX, GOST, and CSA, heater is suited for applications in chemical/petrochem, oil and gas plants.

Grieve Corporation, The
Round Lake, IL 60073-2898
Aug 22, 2007 Offering 54 x 72 x 72 in. workspace, No. 825 is equipped with 30 kW power installed in Incoloy sheathed tubular heating elements, and 6,000 cfm recirculating blower that delivers horizontal airflow across workload. Unit includes 4 in. thick insulated walls, 2 in. insulated floor with truck wheel guide tracks, aluminized steel exterior, and Type 304 2B stainless steel interior. For safety, oven features digital programming temperature controller and manual reset excess temperature controller.

Nordson Corp., Packaging Systems
Duluth, GA 30097
Aug 17, 2007 PURBlue(TM) EC melters facilitate use of reactive polyurethane (PUR) adhesives. Components in contact with PUR adhesive - tank, grid, reservoir, and pump block - can be dismantled to aid cleaning process, while pump shutoff valves and quick-disconnect heater and sensor cables facilitate maintenance. Tank accommodates 39.68 lb adhesive slugs measuring 11 in. in diameter, and inert gas blanket protects adhesive from moisture to prevent premature curing.

Torrey Pines Scientific, Inc.
San Marcos, CA 92069
Aug 16, 2007 Peltier-driven and fully programmable, EchoTherm(TM) IC35 Series stores 5 programs in memory - with 10 steps per program - for instant recall and use. Each program can be made to repeat automatically from 1-99 times. Heavy-duty dry bath models IC35 (-10 to +100°C) and IC35XT (-20 to +100°C) can freeze, chill, or heat samples in variety of sample blocks that hold 0.5-50 ml centrifuge tubes, test tubes, vials, assay plates, and round-bottom flasks. Each measures measure 8.5 x 10 x 4 in.

ACE Production Technologies
Spokane Valley, WA 99216
Aug 09, 2007 Used as primary preheating function or in combination with ACE discrete preheaters to maintain board temperature during soldering operation, real-time preheating module applies heat to top side of PCB. For high-mass assemblies, unit promotes draw of solder through barrel to top side of board, enhancing formation of solder fillets. Optical pyrometer reads actual PCB temperature with real-time closed loop control.

Thermal Press International
Livermore, CA 94551
Aug 01, 2007 Designed to optimize assembly throughput during miniature plastic parts assembly, C frame machine promotes flexibility for mounting on rotary tables, shuttle, or other custom designed tables. Extended arm capabilities are available for other types of products. Along with optional camera vision systems, machine can also include automatic interposer dispensing system. H frame unit is also available, suited for higher force applications.

David Weisman, LLC
Stamford, CT 06903
Jul 05, 2007 Fast Response Electric Infrared Boost Oven System lets users boost temperatures of liquid or powder coated on small, medium, and large 3D products prior to entrance to hot air/convection oven. Equipped with electric IR heaters and controls, modular design allows for addition of more heated height and/or air recirculation system. System can be used as stand-alone complete cure oven or as boost system in conjunction with existing hot air/convection oven.

Osram Sylvania, Inc.
Danvers, MA 01923
Jul 03, 2007 Featuring digital display temperature control, SKORPION(TM) Process Air Heater provides full closed-loop PID temperature regulation with ±2° accuracy. Device includes serpentine coil design for maximum heat transfer efficiency, blower motor, air intake, and intelligent over-temperature sensing system. All-metal air source ensures operation in dusty environments, and unit also features adjustable air damper for flow control.

Torrey Pines Scientific, Inc.
San Marcos, CA 92069
Jul 02, 2007 Two-Position EchoTherm(TM) Model IC22XT can run 2 separate temperatures and 2 different sample blocks simultaneously. Suited for freezing, chilling, or heating biological samples from -20 to +100°C, digital system features built-in data logger, 30-day countdown timer with alarm, and RS232 interface. It can be used with accessory sample blocks for 0.5, 1.5, and 2.0 ml centrifuge tubes, PCR tubes, and plates; 96-well and 384-well assay plates; 2.0 ml vials; and most test tube sizes.

Chromalox
Pittsburgh, PA 15238
Jun 21, 2007 Powered by electricity, Model LTFX features 4-240 kW open-style coil elements, which may be removed without draining tank, requiring minimal or no process downtime. Unit is equipped with 4-14 in. 150 No. ANSI flange and type J thermocouple for temperature sensing on pipe wall. Heating operation may be fully automated using timers and controllers. With operating temperature of 0-750°F, heater is suited for fire water storage, asphalt, bio-diesel, and animal fats.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Jun 21, 2007 Model Z3145 Valve Shot nozzles are designed for processing polyolefins and styrene in shot weight range of 5-25 g. With nozzle front sealing diameter of 10 mm, body diameter of 16.5 mm, and finely scaled nozzle lengths of 80- 140 mm, it is possible to work with small cavity centers and reach difficult gating positions. Balanced filling of all cavities is achieved by simultaneous opening of valve pins after certain amount of pressure has built up.

Talboys Engineering Corp.
South Montrose, PA 18843
Jun 05, 2007 Available in analog or digital versions, Dry Block Heaters can accommodate 1, 2, 3, 4, or 6 modular blocks. Digital version features microprocessor controls for temperature uniformity, timer with audible alarm, and heats from ambient to 120°C. With 2 temperature adjustment knobs, analog unit heats from ambient to 150°C. Heaters are suited for educational, bio-pharma, food and beverage, industrial, environmental, research, and clinical markets.

Komax Systems, Inc.
Wilmington, CA 90748 1323
May 25, 2007 Based on Hi-Pass(TM) non-clogging static mixer, Klean-Flow heat exchanger suits wide range of municipal and industrial applications including municipal sludge digesters, biogas recovery, ethanol production, and animal waste heat recovery. Unit comes with contoured elements to maximize heat transfer while eliminating corners that can trap solid or fibrous materials.

Omega Engineering, Inc.
Stamford, CT 06907
May 24, 2007 Able to be conformed to many flat and curved surfaces, Kapton® Heater Kits are suitable to various applications. Kits include etched foil heaters that withstand temperature extremes from -328 to 392°F and are constructed in 15 different shapes. RoHS compliant heater kit offers chemically resistant heaters of multiple resistances and wattages. Applications include automotive, aerospace, agriculture, petroleum, packaging and material handling.

Marley Engineered Products
Bennettsville, SC 29512
May 18, 2007 Designed to achieve uniform heating, 12½ x 10½ in. CWH and SRA Architectural Series promote comfort by eliminating cold-air circulation at start-up and discharging all heated air after thermostat is satisfied. Thermostat range covers 40 to 90°F, and steady air movement is rated at 65 cfm. Offered under Berko and Qmark brands, each includes 7 models of increasing strength (from 500-2,000 W at 120, 208, 240, or 277 V) and can be field-adjusted to provide 100% or 50% of rated output.

Grieve Corporation, The
Round Lake, IL 60073-2898
May 07, 2007 Along with workspace dimensions of 48 x 96 x 72 in., No. 993 has 4 in. insulated walls throughout, aluminized steel exterior and interior, and 2 in. insulated floor with built-in truck wheel guide tracks. There are 45 kW installed in Incoloy sheathed tubular elements to heat oven, while 6,000 cfm, 5 hp recirculating blower provides horizontal airflow across workload. Additional features include 10 in. dia circular chart recorder and 30 hr oven shutdown timer.

Wisconsin Oven Corp.
East Troy, WI 53120
May 07, 2007 Electrically heated, 2-zone, top flow conveyor oven features 34 ft x 10 ft 4 in. x 2 ft chamber rated for 700°F max. Rated for 10,000 lb/hr, its slat type conveyor has 4 in. wide x ½ in. thick carbon steel slats and 9 strands of 6 in. pitch conveyor chain to carry load. In addition to integral conveyor monitoring system that promotes safe operation, oven comes equipped with strip chart recorder, push-pull style cool down system, and PLC with touch screen.

John Zink Co., LLC
Tulsa, OK 74121
May 07, 2007 WindPROOF(TM) InstaFire(TM) is engineered with rapid response capability as well as 3 levels of detection and relighting redundancies. Integration of WindPROOF technology enables operation in extreme weather conditions, including high winds. Consuming as little as 45 scfh of natural gas, system exceeds American Petroleum Institute Standard 537 recommendations.