Charles A. Hones, Inc.
North Amityville, NY 11701
Apr 25, 2008 Suited for heating and melting applications, Radial Ring Burner is gas-fired and constructed of cast iron. Buzzer ring burner, offered as alternative to burners stamped out of sheet metal, suits applications where resistance to radiated heat or high temperatures are required. Diameters from 6 in. (30,000 BTUH) to 21 in. (270,000 BTUH) are available. Rated at 75,000 BTUH, 308 radial ring burner has shut-off valve, pilot burner, cast iron stand, and safety valve.

Diversified Heat Transfer, Inc.
Ridgewood, NY 11385
Apr 10, 2008 Coils are manufactured from tube materials consisting of copper, 90/10 cupronickel, SS, or carbon steel. Steam Coils have standard steam and steam distributing coils. Also available are industrial HVAC heating and cooling air-handling coils and plate fin, helical fin, L-footed, and solder-bonded air coils with 3/8-1 in. OD tubing for steam and water applications. Econo Line shell and tube heat exchangers, 4-30 in., are offered in steam-to-liquid or liquid-to-liquid styles.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Apr 03, 2008 Rated for NEC Class I Division 2 locations, 165 W Mercmaster(TM) III delivers 100,000 hours of virtually maintenance-free operation. Unit features corrosion-resistant materials and operates safely in temperatures down to -50°C. Mercmaster(TM) III is suitable for industrial, chemical processing, and refining operations where flammable gases and vapors are present, as well as non-hazardous locations subject to extreme weather and excessive dirt and moisture.

OK International
Garden Grove, CA 92841
Mar 28, 2008 PCT-1000 Programmable Preheater is benchtop system delivering forced convection heat that can be controlled with 4 time and temperature zones and additional cooling zone. External thermocouple input can be used for control of output temperature based on board or component temperature and also as process monitor. Designed to create convection vortex, system can be operated in manual or programmable automatic mode where up to 50 thermal profiles can be stored.

David Weisman, LLC
Stamford, CT 06903
Mar 28, 2008 Designed to dry or cure liquid and powder coatings on wide range of products, Horizontal Conveyorized Infrared with Air Drying System features electric infrared heaters with integral air plenums and controls; air supply and exhaust system; and insulated oven enclosure. System can be used as stand-alone complete horizontal conveyorized drying/curing system or in conjunction with coating application equipment and incoming/outgoing conveyors.

David Weisman, LLC
Stamford, CT 06903
Mar 28, 2008 With ability to heat, dry, and/or cure liquid or powder coatings on small, medium, and large 3D products, Heavy Duty Gas Fired or Electrically Heated Batch Oven systems feature air recirculation and exhaust system as well as insulated enclosure. They have digital timer, auto-shutdown, real-time clock, maintenance prompts/auto dialer, and hour meter. Bi-parting doors feature 12 ga exterior with supports, ball bearing hinges, and FM approved safety latches.

GEA PHE Systems NA
York, PA 17402
Mar 18, 2008 At 20 lb and 5 x 12 x 5.4 in., 5 Ton Chiller is brazed plate heat exchanger rated at 450 psig. It has copper-brazed SS construction with high-performance heat transfer surface and includes top sealing plate and Easy Sweat fittings. UL Listed device can handle wide range of fluids and can be computer selected for specific application conditions. System is suited for use in commercial, industrial process, or residential applications.

Paragon Industries, L.P.
Mesquite, TX 75149
Mar 18, 2008 Available with 8 x 8 x 4½ in. interior rated to 2,350°F, 120 V FireFly Digital Kiln can fire jewelry made from glass, silver clay, porcelain, and stoneware. It has digital controller to duplicate firing profile of larger kilns, and is offered with optional 2 x 2 in. high-temperature glass window in top for monitoring glass fusing. Kiln is made of 2½ in. thick insulating firebrick and features dropped, recessed grooves that protect replaceable heating elements.

Wisconsin Oven Corp.
East Troy, WI 53120
Mar 10, 2008 With production rate of 600 lb of parts/hr, Electrically Heated Conveyor oven is designed to heat parts from 70-1,100°F, and features 1,250°F maximum operating temperature. Constructed with 10 in. thick insulation, 3/16 in. thick plate steel exterior, and 16 ga 304 SS interior, it has 30 in. wide, 9 ft long, and 1 ft high heating chamber. Heating system is rated for 180 kW of heat input, while recirculation blower is rated for 18,000 cfm at 15 hp.

Diversified Heat Transfer, Inc.
Ridgewood, NY 11385
Mar 07, 2008 Available for all heat transfer applications, shell and tube heat exchangers come in horizontal and vertical tube designs. Optional welded tube-to-tube sheet construction promotes strength and sealing qualities. U Tube designs are stress relieved at bend area, and standard shell sizes range from 3-40 in. OD and up to 40 ft long. Products are manufactured to various standards, including those of 3A, ASME, TEMA, and API.

Noren Products, Inc.
Menlo Park, CA 94025
Mar 07, 2008 Rated at 700 BTU/hr cooling capacity with efficiency of 10 W/°C, Mighty Mini CC100 provides closed-loop cooling within sealed enclosures, protecting electronics from contamination caused by dirt, oil, humidity, and corrosives. Heat pipe technology removes excess heat from electrical and electronic enclosures, and solution is built as to require minimal maintenance. Areas of application include electrical, electronic, drive, and device control panels.

Marley Engineered Products
Bennettsville, SC 29512
Mar 04, 2008 Designed for concealed and plenum space applications, Berko® and QMark® PRH Series offer multiple heat rise selections, with heating ratings from 3-15 kW. Max outlet air temperature is 200°F at static pressure of 0.2 in. Available with voltages of 208, 240, 277, and 480 V, heaters feature steel-finned heating elements, acoustic fiberglass insulation, and forward-curved centrifugal blower. Small unit is 24 x 19½ x 12½ in., while large cabinet measures 35 3/8 x 18 x 18 in.

Techne Inc.
Burlington, NJ 08016
Feb 29, 2008 Operating over temperature range of ambient to 100°C, Dri-Block® DB-2TC accommodates 2 aluminum insert blocks with independent digital temperature controls, making it suited for multiple users or for applications where samples have to be transferred between 2 temperatures quickly. Unit has heat-up rate of 30-100°C in 19 minutes with temperature stability of ±0.1°C. Compact design allows heater to be placed in fume cabinets where corrosive/toxic chemicals are used.

Wisconsin Oven Corp.
East Troy, WI 53120
Feb 25, 2008 Along with 12 ft x 47 ft x 9 in. chamber rated to 500ºF max, bottom-flow conveyor oven features chain style conveyor with 10 strands of carbon steel chain spaced across width on 60 in. centers. Heating system features Eclipse 320 AH burner rated at 3,000,000 BTU/hr, and Allen-Bradley Powerflex VFD provides conveyor speed adjustability from 1.5-9 ipm. Oven is constructed with 4 in. thick tongue and groove panel assemblies, with interior and ductwork of aluminized steel.

Nexus Technology
Nieuwerkerk aan den IJssel   Netherlands
Feb 22, 2008 Available in black, blue, and plain aluminum, HXR-5500 features aluminum extrusion heatsink with integrated 5 mm dia heat pipe used to cool memory modules. Heat pipe transports heat from memory module onto detached aluminum heat sink on top of module. By using this product, memory module temperature can be reduced by 13 to 14°C.

Charles A. Hones, Inc.
North Amityville, NY 11701
Feb 07, 2008 Buzzer furnace melts low temperature white and soft metals including pewter, babbitt, tin, solder, bismuth, lead, zinc, and die casting alloys. It is available with digital controls, high limit safety, and comes in 5 standard sizes with lead capacity from 160 to 2,700 lb. Customization includes special sizes, tilting furnaces, high temperature metals, and bottom drain spout units.

Radiant Optics, Inc.
Woodinville, WA 98072
Feb 06, 2008 Designed for commercial and residential deck and patio applications, HZE X5C 015 series has curved back design and compound reflective IRLens(TM) that focuses IR energy into central beam. Unit requires 1,500 W of electric power at 120-277 V and will raise temperature of people and objects in 14 ft² area by 15° or more from 8 ft away. Heater can be wall-, ceiling- or post-mounted.

Watlow
St. Louis, MO 63146
Jan 30, 2008 Offered as component for medical devices, ULTRAMIC® 600 ceramic heater can operate up to 600°C with ramp rate of up to 150°C/sec, depending on application, heater design, and process parameters. Unit allows medical devices to pass 500 A, IEC 60601, total system requirement. Available in either rectangle or ring forms, it can be machined to meet specific design requirements including holes, vacuum grooves, or ultra-fine surface finishes.

Charles A. Hones, Inc.
North Amityville, NY 11701
Jan 24, 2008 Available in 4 standard sizes, Buzzer 450 to 1,350°F oven type furnace is designed for automotive engine rebuilding and specifically suited for cast iron/aluminum engine head repair. Insulating firebrick provides abrasion resistance and retains available heat to ensure optimal slow cooling, while fabricated stainless steel roll-out tray facilitates and accelerates casting repair. Safety pilot, 100% shut-off safety valve, and digital temperature controls are standard.

Nordson Corp., Packaging Systems
Duluth, GA 30097
Jan 15, 2008 Combining melter and adhesive feed system, ProBlue® Fulfill(TM) System automatically maintains desired adhesive levels in melter tanks. Integrated capacitance sensor detects low adhesive levels and transmits signal to suction lance. Using vacuum, system conveys adhesive as pellets, pastilles, and mini-slats from supplied closed adhesive storage container directly to melter tank. Adding small quantities of adhesive at regular intervals prevents sealed tank from running dry.