Kebaili Corporation
Irvine, CA 92616
Jul 03, 2008 Featuring platinum resistive thin-film microheater attached between freestanding thin-film silicon nitride and silicon dioxide membranes, KMHP-100 MEMS microhotplate can operate continuously at up to 650°C. It consists of micromachined silicon die attached to gold-plated TO-18 package, which insures stable operation in harsh/hostile environment. Freestanding thin-film silicon nitride membrane thermally/electrically isolates platinum microheater from silicon substrate microstructure.

Turbotec Products, Inc., Div. of Thermodynetics
Windsor, CT 06095
Jul 02, 2008 Intended for commercial use, Enviro-Temp recycles waste heat to generate hot water from air conditioner or refrigeration system. It is available with Savings Calculator application, which lets users input operational information - hot water usage details, types of refrigerant, average run time, length of cooling season, fuels currently used to heat water, fuel cost, and installation cost - to generate report that calculates use and savings as well as Return on Investment.

Minco Products, Inc.
Minneapolis, MN 55432 3177
Jun 27, 2008 Featuring micro-thin, etched foil or wire-wound elements sandwiched in between optical-grade polyester sheets, Thermal-Clear(TM) Heaters provide uniform or profiled heat patterns without blocking light. Units can integrate temperature sensors, flex circuits, controllers, or other electronics to provide total heating solution. Available in sizes up to 280 x 560 mm, heaters are RoHS-compliant and suitable for heating LCDs, cockpit displays, outdoor card readers, and portable military radios.

INDEECO
St. Louis, MO 63144
Jun 20, 2008 In addition to T3C, 320°F ignition temperature code rating, ULTRA-SAFE(TM) EXP features dual over-temperature protection with automatic and manual reset over-temperature cutouts. Product uses non-toxic propylene glycol heat transfer fluid and has 70 psig relief valve setting. Three available corrosive-resistant construction options are available for use in dry, non-corrosive areas; wastewater treatment plants; and chemical plants where chlorides are present.

Gaumer Process Heaters
Houston, TX 77040
Jun 20, 2008 Available in capacities of 9 kW to 13 MW with flange sizes of 3-24 in., 4kV Series(TM) electric process heater can be located away from its power source, such as 1 mile below grade for any down-hole oil production heater. It also enables multi-megawatt heating applications for heating and vaporizing water, steam, ammonia, and glycol. Unit is based on INFI-SEAL(TM) technology, which seals heating elements so they exhibit resistance to ground and do not absorb or retain moisture.

Seco/Warwick Corporation USA
Meadville, PA 16335
May 30, 2008 To cut electrical consumption, High Pressure Quench Vacuum Furnaces feature power management option, which creates single system of alternate control of heating and cooling processes using single frequency converter. Programmable cooling rate is controlled according to load temperature. Offering martempering quench capability, system works with various cooling gases and provides step-less control of heating and cooling power.

Omega Engineering, Inc.
Stamford, CT 06907
May 28, 2008 Providing even heat to contents of drum, DRUM-DHW-55 Series of OMEGALUX® drum heaters feature built-in thermostat that measures 50-425°F and metal screen that is grounded electronically for safety. Heaters wrap around standard 55-gallon drum and attach with spring and hook arrangement. Suited for petroleum, mining, manufacturing, pharmaceutical, and chemical industries, they are resistant to mechanical damage and chemical substances.

Diversified Heat Transfer, Inc.
Ridgewood, NY 11385
May 15, 2008 Made entirely of specially treated AISI 316L Stainless steel to ensure corrosion resistance, E-ZEE Flow incorporates self-cleaning feature and can be used for applications such as in-floor heating, swimming pools, spas, hot tubs, and driveway snowmelts. Titanium version is also available for highly corrosive water conditions. Industrial applications include oil coolers, transmission and engine coolers, boiler sample coolers, and waste water heat recovery.

Manncorp
Willow Grove, PA 19090
May 13, 2008 Using mix of quartz infrared and hot air convection, Model T200A is capable of attaining lead-free temperatures to 300°C and offers ΔT performance envelope of only ±1°C across 14 x 9 in. processing area. Oven will precisely generate and store 20-40 sequential time and temperature settings. In addition to soldering microchips and other SM devices, oven can be used for curing and drying applications.

Charles A. Hones, Inc.
North Amityville, NY 11701
May 07, 2008 Built to order with customizable dimensions, BTU outputs, and accessories, FireBox-HT oven furnace is designed for tool room heat treating and high-temperature (up to 2,150°F) precision casting. It is insulated with 4 ½ in. of firebrick, backed up with additional 2 in. of 1,200°F block insulation. Applications include heating tool steel, carbon steel, cast iron, and other high-temperature metals.

Charles A. Hones, Inc.
North Amityville, NY 11701
Apr 25, 2008 Suited for heating and melting applications, Radial Ring Burner is gas-fired and constructed of cast iron. Buzzer ring burner, offered as alternative to burners stamped out of sheet metal, suits applications where resistance to radiated heat or high temperatures are required. Diameters from 6 in. (30,000 BTUH) to 21 in. (270,000 BTUH) are available. Rated at 75,000 BTUH, 308 radial ring burner has shut-off valve, pilot burner, cast iron stand, and safety valve.

Diversified Heat Transfer, Inc.
Ridgewood, NY 11385
Apr 10, 2008 Coils are manufactured from tube materials consisting of copper, 90/10 cupronickel, SS, or carbon steel. Steam Coils have standard steam and steam distributing coils. Also available are industrial HVAC heating and cooling air-handling coils and plate fin, helical fin, L-footed, and solder-bonded air coils with 3/8-1 in. OD tubing for steam and water applications. Econo Line shell and tube heat exchangers, 4-30 in., are offered in steam-to-liquid or liquid-to-liquid styles.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Apr 03, 2008 Rated for NEC Class I Division 2 locations, 165 W Mercmaster(TM) III delivers 100,000 hours of virtually maintenance-free operation. Unit features corrosion-resistant materials and operates safely in temperatures down to -50°C. Mercmaster(TM) III is suitable for industrial, chemical processing, and refining operations where flammable gases and vapors are present, as well as non-hazardous locations subject to extreme weather and excessive dirt and moisture.

OK International
Garden Grove, CA 92841
Mar 28, 2008 PCT-1000 Programmable Preheater is benchtop system delivering forced convection heat that can be controlled with 4 time and temperature zones and additional cooling zone. External thermocouple input can be used for control of output temperature based on board or component temperature and also as process monitor. Designed to create convection vortex, system can be operated in manual or programmable automatic mode where up to 50 thermal profiles can be stored.

David Weisman, LLC
Stamford, CT 06903
Mar 28, 2008 Designed to dry or cure liquid and powder coatings on wide range of products, Horizontal Conveyorized Infrared with Air Drying System features electric infrared heaters with integral air plenums and controls; air supply and exhaust system; and insulated oven enclosure. System can be used as stand-alone complete horizontal conveyorized drying/curing system or in conjunction with coating application equipment and incoming/outgoing conveyors.

David Weisman, LLC
Stamford, CT 06903
Mar 28, 2008 With ability to heat, dry, and/or cure liquid or powder coatings on small, medium, and large 3D products, Heavy Duty Gas Fired or Electrically Heated Batch Oven systems feature air recirculation and exhaust system as well as insulated enclosure. They have digital timer, auto-shutdown, real-time clock, maintenance prompts/auto dialer, and hour meter. Bi-parting doors feature 12 ga exterior with supports, ball bearing hinges, and FM approved safety latches.

GEA PHE Systems NA
York, PA 17402
Mar 18, 2008 At 20 lb and 5 x 12 x 5.4 in., 5 Ton Chiller is brazed plate heat exchanger rated at 450 psig. It has copper-brazed SS construction with high-performance heat transfer surface and includes top sealing plate and Easy Sweat fittings. UL Listed device can handle wide range of fluids and can be computer selected for specific application conditions. System is suited for use in commercial, industrial process, or residential applications.

Paragon Industries, L.P.
Mesquite, TX 75149
Mar 18, 2008 Available with 8 x 8 x 4½ in. interior rated to 2,350°F, 120 V FireFly Digital Kiln can fire jewelry made from glass, silver clay, porcelain, and stoneware. It has digital controller to duplicate firing profile of larger kilns, and is offered with optional 2 x 2 in. high-temperature glass window in top for monitoring glass fusing. Kiln is made of 2½ in. thick insulating firebrick and features dropped, recessed grooves that protect replaceable heating elements.

Wisconsin Oven Corp.
East Troy, WI 53120
Mar 10, 2008 With production rate of 600 lb of parts/hr, Electrically Heated Conveyor oven is designed to heat parts from 70-1,100°F, and features 1,250°F maximum operating temperature. Constructed with 10 in. thick insulation, 3/16 in. thick plate steel exterior, and 16 ga 304 SS interior, it has 30 in. wide, 9 ft long, and 1 ft high heating chamber. Heating system is rated for 180 kW of heat input, while recirculation blower is rated for 18,000 cfm at 15 hp.

Diversified Heat Transfer, Inc.
Ridgewood, NY 11385
Mar 07, 2008 Available for all heat transfer applications, shell and tube heat exchangers come in horizontal and vertical tube designs. Optional welded tube-to-tube sheet construction promotes strength and sealing qualities. U Tube designs are stress relieved at bend area, and standard shell sizes range from 3-40 in. OD and up to 40 ft long. Products are manufactured to various standards, including those of 3A, ASME, TEMA, and API.