Wisconsin Infrared Systems
East Troy, WI 53120
Apr 14, 2005 Featuring 3 zones that provide uniform heat across web, model Web Dryer/IR/E removes moisture on steel web from 1/8–½ in. thick. Oven uses medium-wave, rapid response heaters and lets users turn off zones when drying smaller web widths. With heaters mounted to heat from top-down and bottom-up, unit can operate coil temperatures up to 2,000°F. Casters enable unit to be moved off web line as required and heating capacity is rated at 200 kW.

Wisconsin Oven Corp.
East Troy, WI 53120
Apr 13, 2005 With heating capacity of 200 kW, WebDryer/IR/E dries moisture on steel web ranging from 1/8–½ in. thick and running up to 200 fpm. Three zones provide uniform heat across web and can be turned off when drying smaller web widths. Featuring tongue and groove panel construction with 6 in. of insulation, oven uses medium-wave, rapid response heaters and can operate coil temperatures up to 2,000°F. Unit is rated for 200–600°F and is mounted on casters.

Pars Mfg. Co.
Ambler, PA 19002-4717
Dec 02, 2004 Manufactured from texturized fiberglass yarn, heat-resistant PARGLASS cloth contains no compound, cement, or wire and will not burn or smolder. It retains 25% of tensile strength, even when service conditions reach 1,000°F, and will not swell, shrink, deteriorate, or change chemically. Available in weights from 8.5–40 oz/yd², product can be aluminized on one side for thermal reflection or have brass or stainless steel wire inserts for increased tensile strength.

Johns Manville
Denver, CO 80202
Nov 17, 2004 LinaTex offers fabricators and installers abuse-resistant insulation for lining sheet metal air ducts. It is made from 100% post-industrial recycled, long strand fiberglass bonded with thermosetting resin. Airstream surface is protected from damage during fabrication by black fiberglass mat surface, and edge-coating covers leading edges per NAIMA/SMACNA requirements. Liner complies with ASTM C 1071 thermal and acoustical performance standards.

Hardy Instruments, Inc.
San Diego, CA 92123 1825
Nov 05, 2004 Suited for web and strand processing applications, controller uses strain gage and LVDT load cells to measure actual tension of product. It comes with dual 4-20 ma output and Ethernet TCP/IP interface, and features WAVERSAVER, which ignores machine vibration to provide accurate signal; C2 electronic calibration; and automatic backup of configuration data. Users can interact with process via keypad, plant network, Palm PDA, or over plant network.

Johns Manville
Denver, CO 80202
Oct 20, 2004 Available in 4 mm fiber lengths for thermoplastics such as PA, PP, PBT, and SMA, ThermoFlow® strands exhibit processing, mechanical, and matrix bonding properties suited for extrusion applications. Product features minimal fines and bulk density as well as uniform bundle size and shape. Featuring consistent glass content, strands are suited for automotive, electrical and consumer goods applications.

Glen Raven Inc.
Glen Raven, NC 27217
Oct 12, 2004 Featuring NFPA70E Hazard Risk Category Rating of Class 2, GlenGuardâ„¢FR 6 oz fabric consists of blend of fibers, including Kermel® aramid, and is engineered to provide comfort and moisture management to help keep wearer cool and dry. Offering abrasion resistance, fabric is UL certified and meets Canadian Standards CGSB 155.20 for industrial flash fire protection. It is also in compliance with Canadian Wildland Firefighting standard CGSB 155.22.

AccuWeb, Inc.
Madison, WI 53707
Sep 07, 2004 Utilizing 4 ultra-high intensity LED light sources, AccuBeam® II recognizes and guides any printed line or pattern regardless of color or surrounding graphics. To compensate for different reflective qualities of matte, glossy, or holographic webs, unit provides 3 projection ports. A 20 MHz microprocessor performs frame-by-frame analysis of captured images to optimum scanning accuracy. Up to 25 settings can be stored in non-volatile memory and recalled.

Linq Industrial Fabrics, Inc.
Summerville, SC 29483 9665
Jul 14, 2004 CROHMIQ® Type D Fabric features humidity-independent coating with components that cannot wash off, migrate to surface, or contaminate bulk product inside FIBC. CROHMIQ fabrics offer protection against incendiary electrostatic discharges, and FIBCs do not require grounding. Fabric is suited for bulk storage or transport of dry food, and complies with Federal Food, Drug, and Cosmetic Act and applicable food additive regulations of FDA.

AccuWeb, Inc.
Madison, WI 53707
Jun 02, 2004 WideArrayâ„¢ Edge Detector detects web edges passing through 18.4 in. wide edge detection range. When positioned on opposite sides of web in center guiding mode, detection range is doubled, providing 36.8 in. fully compensated detection. Wide detection range allows operators to change guide point or web width without manual adjustment. Detector is available in ultrasonic and infrared models.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
May 03, 2004 Mor-Melt R-7001E moisture-curing polyurethane reactive hot melt adhesive resists high temperature, moisture, and solvents. Product retains tensile strength in autoclave or sterilization environments and is typically applied at temperatures from 100 to 120°C. Composed of 100% solids, adhesive eliminates puckering, shrinkage, or destruction of delicate substrates. Application methods include roll coating, gravure, screen, slot die, and spray.

ITC Mfg. Inc.
Phoenix, AZ 85009
Mar 17, 2004 Hanita square- and ball-nosed end mills, designed for mold and die machining, cut materials such as graphite and steels hardened to 60 Rockwell C at speeds to 150 m/min. Offered in 4 series, Diamond Like Coating or TiAIN coatings are available. Hanita Vision end mills, designed for machining hardened steels up to 67 Rockwell C, operate at speeds to 200 m/min. They give surface finish of 63Ra and come in sizes from 4–25 mm dia with length of cut from 8–45 mm.

AccuWeb, Inc.
Madison, WI 53707
Mar 17, 2004 Suited for printing, coating, and laminating operations that require spark-free environments, brushless web guide actuator directs electrical current to motor windings electronically. Design creates no sparks and reduces maintenance by eliminating need for brush replacement. It interfaces with Micro 4000® NET network-compatible controller and compensated array edge detectors.

Davis-Standard Corp.
Pawcatuck, CT 06379-2313
Feb 20, 2004 Horizontal 3-roll stack allows for casting, laminating, and sheet processes due to its ability to integrate different payoffs and winders. Machine is available in sizes from 12–30 in. wide, with single- and twin-screw extruders, in single- and multi-layer configurations. Each roll is independently servo driven, with precise roll dimensions and roll gaps available. Unit is suited for use by processors of complex applications requiring low melt-strength materials.

Contech
Goddard, KS 67052
Dec 10, 2003 Equipped with variable-frequency vector drive, CompuSheeter II handles materials such as paper, fiberglass, foam, foil, nonwovens, vinyl, rubber, plastic, and insulation. Rate of speed depends on size and type of material and desired tolerance. Unit also comes with 200 lb unwind, tension brake with 3 in. cores, PLC control system, and programmable length control for tolerances of ±1/16 in. Custom programming and configurations are available.

Nexen Group, Inc.
Vadnais Heights, MN 55127
Dec 04, 2003 Offered as pre-configured system that maintains steady web tension, RSD250 Dancer Unwind Package contains RSD250 controller, EN50 pressure converter, air filter, DPS60 dancer position sensor, and all cables and air line tubing. Controller uses air pressure to increase/decrease pneumatic brake torque, allowing dancer roller to remain at mid-travel position. User can set RSD250 for momentary or maintained start/stop signal, adapting to any tension situation.

i2S Line Scan
Niskayuna, NY 12309-0028
Nov 28, 2003 FLAW SCAN SYSTEM detects 0.3mm² defects on 2 m wide webs, running at 200 m/min. It contains embedded hardware and software with i2S technology for real-time defect detection on continuous web products. Features include real-time display and roll-map, statistical analysis of defect content, and power defect classification tool. Programmable alarm settings are offered for each defect class. Applications include paper, nonwovens, plastic films, metal-foil manufacturing.

Linq Industrial Fabrics, Inc.
Summerville, SC 29483 9665
Oct 22, 2003 CROHMIQ® WHITEâ„¢ Type D static protective fabric, for manufacture of flexible intermediate bulk containers (FIBCs), is white with distinctive blue highlight yarns. It eliminates hazardous static discharges without requirement of grounding and with no special FIBC construction techniques. Fabric is offered in weights of 3.0 and 6.5 oz/yd².

Plastomer Products Division
Newtown, PA 18940 1803
Sep 17, 2003 PLASTOLONâ„¢ Fibers, available in flat format, can also be twisted in single or multiple strands to provide threads measuring from 600 denier and higher. Physical properties include thermal resistance to 550°F, resistance to intense UV exposure, and low co-efficient of friction. In particulate filtration applications, dust collector bags made with PLASTOLONâ„¢ Filtration Fibers withstand extreme operating temperatures and chemical environments.

Contech
Goddard, KS 67052
Aug 06, 2003 ServoSheeter provides high-speed operation and close tolerance performance similar to rotary sheeter. Down-acting scissor shear cuts clean in short and long increments. Optional fixed-gap shear allows clean cuts through dense materials. Machine features heavy duty components and brushless servo motor for minimal maintenance. Optional Allen-Bradley PLC controls are available, allowing operator to control equipment from remote touchscreen.