Wolfson Microelectronics plc
Edinburgh EH11 2QB  United Kingdom
Oct 30, 2008 Using CMOS/MEMS membrane technology, Models WM7110 and WM7120 measure 4.72 x 3.76 x 1.25 mm and 3.76 x 2.95 x 1.10 mm, respectively, and consume 160 µA, making them suited for mobile phones, video cameras, and navigation devices. Both silicon microphones feature THD of 0.5% max at 100 dB sound pressure level. Offering enhanced sensitivity tolerance of ±1 dB, versions WM7110E and WM7120E eliminate need for production line testing and calibration software algorithms.

Banner Engineering Corp.
Minneapolis, MN 55441
Oct 30, 2008 Able to withstand hostile environments due to its IP67 U-GAGE housing and fully encapsulated electronics, U-GAGE® T30UX comes in 3 ranges for sensing from 100 mm to 3 m. Models are available with single analog or user-configurable discrete output. While 30 mm threaded barrel and selection of mounting brackets facilitate installation, push-button TEACH-mode programming simplifies setup. Remote TEACH is also available for increased security and convenience.

FUTEK Advanced Sensor Technology, Inc
Irvine, CA 92618
Oct 30, 2008 Offering plug-and-play operation with basic software, LSB200 S-Beam Jr Strain Gage Based Load Cell features 16-bit USB digital interface. Miniature solution measures 0.75 in. high and utilizes metal foil strain gauge technology. Along with overload protection, load cell comes with female threads, 2024 Aluminum or 17-4 Stainless Steel construction, and 5 ft 29 AWG 4 conductor shielded silicone cable. It exhibits accuracy with nonlinearity of ±0.1% and deflection of 0.005 in.

MTS Systems Corp. - Sensor Div.
Cary, NC 27513
Oct 29, 2008 Portable in design, M-Series CAN Test kit allows cylinder manufacturers to verify functionality of CAN protocol versions of M-series linear position sensors once installed in cylinders. It includes GUI and AC/DC converter that provides power directly to sensor, isolating it from rest of vehicle. Kit also includes test cable with M12 plug, which mates with M12 Integrated Connector System, and cable allowing customization to other connector systems.

Densitron Corp.
Santa Fe Springs, CA 90670
Oct 29, 2008 Utilizing ITO metal film technology, DTS413 series features Projected Capacitive (PCT) sensor component behind glass front cover lens for protection against physical, mechanical, and chemical abuse. Light transmission up to 90% promotes readability, and no recalibration is required since there is no drift. Able to work with gloved or ungloved finger, sensors require activation force approaching 0 g on glass cover lens. Standard sizes include 3.2, 3.5, 4.3, and 5.7 in.

Micronas GmbH
Frieburg D-79108  Germany
Oct 29, 2008 Supplied in TO92UT package, programmable HAL® 880 uses digital technology to deliver optimal sensor performance while offering linear analog output for compatibility with existing sensor designs. Fully push-pull 12-bit ratiometric analog output exhibits less than 25 mV noise, and programming parameters are kept in internal EEPROM (with 13 extra bits for customer or application data). Sensor uses DSP to perform sensor linearization and can compensate for variations in Hall effect.

RAE Systems
San Jose, CA 95134
Oct 28, 2008 Designed to operate in full temperature range of -40 to 122°F, single-sensor, battery-powered MeshGuard(TM) detects hazardous levels of hydrogen sulfide or carbon monoxide. Unit is intrinsically safe for hazardous atmospheres and weatherproof to IP65 rating. Remote readings for up to 24 monitors are displayed on FMC 2000 wireless controller, which provides 4 programmable SPDT relays. Applications include oil and gas drilling, plant maintenance, industrial safety, and maritime monitoring.

Photovac Inc.
Waltham, MA 02451 1166
Oct 28, 2008 Voyager Portable Gas Chromatograph offers on-site capability for measuring critical sulfur species to establish sulfur and VOC content in natural gas, thereby allowing production companies to determine corrective measures for scrubbing and removal of contamination. Datalogging capability enables readings to be stored in instrument and downloaded to computer for analysis and recordkeeping. Voyager is intrinsically safe for operations in hazardous environments.

National Semiconductor Corp.
Santa Clara, CA 95051-0695
Oct 27, 2008 Manufactured on automotive grade flow meeting AEC-Q100 Grade 0 qualification requirements, model LM95172Q monitors automotive system temperature between -40 to 175°C. It includes serial peripheral interface as well as MICROWIRE® bus interface. Supplied in die form for mounting on hybrid circuit boards, unit features 16-bit sigma-delta ADC, conversion rate of 35 ms, high resolution of 0.008°C/LSB, and temperature switch as well as self diagnosis to ensure safe, continuous operation.

Dytran Instruments, Inc.
Chatsworth, CA 91311
Oct 27, 2008 Model 3035M18 is available with sensitivity of 10 mV/g and M3 mounting screw. Miniature accelerometer is hermetically sealed, made of stainless steel, and weighs only 2.5 grams. Because of its light weight, this unit is suited for for applications where vertical space is limited and where mass loading effects are a concern.

Cognex Corp.
Natick, MA 01760 2059
Oct 27, 2008 Designed to provide pass/fail results on high-speed production lines, Model 252 Checker Vision Sensor helps manufacturers in verifying dimensions of parts with low-contrast edges. One-Click Setup(TM) allows user to click on center of part feature to be inspected, displays image of familiar caliper, which locks on edges of part feature, sets minimum/maximum thresholds, and learns edge polarity automatically. Product is available with compact Cognex SensorView(TM) 350 panel-mount display.

Emerson Process Management
Austin, TX 78754
Oct 27, 2008 With CSI 6500 Machinery Health Monitor, user can combine protection modules from CSI 6000 Machinery Health Monitor with plug-in prediction modules to create single rack for complete online monitoring solution. System leverages predictive diagnostic capabilities of AMS® Suite to detect plant asset problems before they become critical. For real-time decision-making, software provides graphical view of process and protection parameters, as well as machinery health and performance information.

Mettler-Toledo Safeline, Inc.
Tampa, FL 33634 3009
Oct 27, 2008 Designed for high-speed inspection of tablets and capsules being discharged from molding presses, Tablex 2 safeguards pharmaceuticals and nutraceuticals from metal contaminants in compliance with Good Manufacturing Processes. OPC-compliant solution, sensitive to all metal types, connects with manufacturing data management system for remote operation/monitoring. It fits into any press output configuration, with low-profile casters for mobility and 3-axis head adjustment flexibility.

Balluff, Inc.
Florence, KY 41042-0937
Oct 24, 2008 Used to monitor continuous and/or oscillating rotary shaft motion, BML S2E provides velocity and position information for applications such as conveyors, speed control, and angle measurement. Basic design, comprised of magnetically encoded ring and non-contact sensor head, facilitates installation and provides quadrature output at up to 46,000 ppr. Offering continuous feedback, encoder also provides angle measurement for any apparatus that revolves around shaft.

Honeywell Sensing and Control
Golden Valley, MN 55422 3935
Oct 24, 2008 Comprised of 17 models, RPN Series offers 8 operating ranges up to 360°, 5 supply voltage outputs (5-30 Vdc), 8 output configurations (mA or Vdc), and 2 connector choices (AMP Superseal, Deutsch) to meet needs of any control system. Magnetically based, Hall-effect IC is used to sense rotary movement of actuator shaft, and linearity as low as ±0.35° lends to measurement precision. Supplied in IP67 package, sensor also includes conditioning and protection circuitry.

GAO RFID Inc.
Toronto   Canada
Oct 24, 2008 RFID Portals consist of rugged steel chassis housing RFID electronics, optional accessories, high-impact industrial plastic covers, integrated steel kick-plates, and secure steel base-plates. Design facilitates installation and serviceability, with removable plate on top of body that provides access to ac power, LAN, and accessory connections. Optional configurations offer RFID reader, circular polarized antennas, internal power supply, and audible horn.

Gigamon Systems
Milpitas, CA 95035
Oct 24, 2008 Existing outside normal configuration management supervision, Data Access Network (DAN)provides intelligent connectivity layer between production network and enterprise's monitoring tools, ensuring unobtrusive data access to every device. DAN technology is based on circuit switching of replicant packets rather than live traffic, so network performance is not impacted. As local/remote access management plane, DAN can provide full access to data across network while maintaining strong security.

Bosch Rexroth Corp., Pneumatics Div.
Lexington, KY 40511
Oct 23, 2008 Supplied in IP65 polymer housing, PE5 offers numerous pneumatic connection options and is available with 2 digital switch outputs or one digital switch output and one analog output. Versions with PNP or NPN outputs are available, and analog output signal can be switched from 0-10 V and 4-20 mA. In addition to LCD with 0.43 in. tall characters, switch features 3 ergonomically arranged buttons to facilitate installation and operation. Pressure range options vary from -14.5 to 145 psi.

GE Energy Rentals
Houston, TX 77029
Oct 22, 2008 Allowing operators to monitor inaccessible plant equipment, Essential Insight(TM) .mesh Wireless Condition Monitoring Solution enables temperature and vibration data to be transmitted wirelessly from asset to system software platform. With wireless sensors, system also helps enhance worker safety and ability to monitor equipment in hazardous areas. System comprises of wSIM(TM) sensor, Essential Insight .mesh repeater, Essential Insight .mesh manager gateway, and transducers.

Dakota Instruments
Orangeburg, NY 10962
Oct 22, 2008 Offering maintenance-free operation, chemical resistant Injection-Molded Flow Meters feature direct-reading dual scales available in overlapping flow ranges for water (gpm/lpm) or air (scfm/m³/hr). Models are available with 316 SS, PTFE, or PVC floats, and optional integral flow adjustment valve is offered for panel-mount version. Applications include air sampling equipment, water treatment and distribution systems, and photo processing equipment.