General Monitors
Lake Forest, CA 92630
Nov 05, 2008 With ability to monitor combustible gases in lower explosive limit, IR400 combustible gas detector provides 4-20 mA analog signal proportional to 0-100% LEL concentration. Through 2-way digital communication protocols, users can access device configuration, warning/alarm, fault and maintenance records as well as monitor gas concentration, check status, and perform real-time diagnostics. Suitable for wide range of hazardous industry processes and plant applications, device uses 4.8 W of power.

Ambios Technology Inc.
Santa Cruz, CA 95060
Nov 05, 2008 Offered as fully integrated solution, Q-View White Light Interferometer/SPM system combines benefits of white light interferometry and SPM technologies. Q-View Interferometric Module integrates seamlessly onto Q-Scope SPM platform. It uses optical profiler technology to render and measure areas as large as 500 µm within seconds. Users can switch to SPM mode and characterize surface structures at sub-angstrom level.

Sensortechnics, Inc.
Walpole, MA 02081
Nov 04, 2008 Consisting of capacitive ceramic pressure cells in SS construction, submersible KTE2000CS Series is compatible with many corrosive and aggressive liquids. Units are calibrated and temperature compensated from -4 to 158°F and provide 4-20 mA output signal. Cable with integrated vent tube allows true reference pressure to sensor element and eliminates errors due to atmospheric pressure changes. Rated to IP68, sensors withstand overpressure up to 10 times rated pressure.

Linear Technology Corp.
Milpitas, CA 95035-7417
Nov 04, 2008 Supplied in 3 x 2 mm DFN, LT5581 broadband 10 MHz to 6 GHz RMS detector features 40 dB dynamic range and 1.4 mA operating supply current. DC voltage output, proportional to log input power, provides mV/dB scaling with linearity exceeding ±1 dB across 40 dB range. Measurement ability provides RF power readings to ±0.2 dB, regardless of waveforms that have high crest factor modulated content. Solution delivers accuracy of ±1 dB over -40 to +85°C range and operates over 2.7-5.25 V range.

Linear Technology Corp.
Milpitas, CA 95035-7417
Nov 04, 2008 Housed in 8 x 12 mm surface mount package, LTC6802 ICs can be stacked in series without optocouplers or isolators, for voltage monitoring of every cell in strings of series-connected batteries. Maximum total measurement error is guaranteed at less than 0.25% from -40 to 85°C and all cell voltages in battery stack can be measured within 13 ms. Each LTC6802 communicates via 1 MHz serial interface, and includes temperature sensor inputs, GPIO lines, and precision voltage reference.

Loadstar Sensors, Inc.
Mountain View, CA 94043
Nov 03, 2008 Featuring digital USB or analog 0-5 Vdc output, iPedal Sensors measure brake force at accuracies up to 1% and minimize error due to off-axis loads. Units integrate signal conditioning and communications for Plug and Sense operation. Digital model is offered with DS-3000U Display and Controller to provide real-time readings and ability to connect to PC via USB uplink. Using LoadVUE software with digital model, users can log data and export to Excel file for plotting and further analysis.

Fischer Technology Inc.
Windsor, CT 06095
Nov 03, 2008 Combining 2 physical measurement methods, DUALSCOPE® FMP100 calculates thickness for non-magnetic coatings on ferrous substrate materials and electrically non-conducting coatings on NF-metals. Configuration options promote clear presentation of results, and user can create application-specific interfaces and printform templates. While USB port enables connection to external keyboard, printer, or PC, software is provided for managing measurement application and configuring instrument.

TireStamp
Troy, MI 48098
Nov 03, 2008 Designed for fleet customers, TireVigil(TM) is capable of detecting tire problems, alerting fleet, and making recommendations for corrective actions. TireVigil(TM) Servicing allows service technician to view state of vehicle's tires on any Internet-enabled computer or using hand-held wireless device. With cellular or Wi-Fi data connection, TireVigil(TM) Mobile can perform vehicle tire pressure survey during pre-trip inspection, while vehicle is moving, or as part of regular vehicle service.

Measurement Specialties, Inc.
Hampton, VA 23666
Nov 03, 2008 Offering both static and dynamic response from ±2 to ±500g, low-noise triaxial accelerometer model 4630 provides stable output over -40°C to +100°C temperature range with standard thermal zero and sensitivity shift of ±0.010 %FSO/°C. Aluminum housed unit features hermetically sealed 3 independent circuit assemblies and can operate on common or separate power supplies with excitation voltage range of 8-32 Vdc.

Detector Electronics Corp.
Minneapolis, MN 55438
Nov 03, 2008 Using nanotechnology in Metal Oxide Semiconductor (MOS) sensor, NTMOS H₂S gas sensor detects low H₂S gas concentrations in 5 sec or less while tolerating harsh environments that include extreme temperature and/or humidity conditions. Packaged in rugged housing, protected by sintered stainless steel flame arrestor, sensor can be installed in Class I, Div 1 locations either as standalone or combined with display for local indication.

ATI Industrial Automation
Apex, NC 27639
Oct 31, 2008 Able to measure 6 components of force and torque, temperature-compensated Net F/T Sensor System integrates EtherNet/IP(TM) and CAN bus communication interfaces as well as support for operation via PoE or 11-24 Vdc external power supply. Multiple transducer calibrations can be permanently stored for user selection, and LAN-ready unit is configurable via Web interface and offers programmable threshold. Output rates reach 7,000 Hz for 6 axes of measurement over Ethernet.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Oct 31, 2008 Series RH-R Humidity/Temperature Transmitter is designed for applications where space is limited. Compact sensor is protected by replaceable filter and can be mounted up to 16 ft away from weatherproof base. With relative humidity range of 0-100% and temperature range of -40 to 140°F, Series RH-R is suited for environmental chambers, rubber bladder burst detection systems, and air handler applications.

Murata Electronics North America, Inc.
Smyrna, GA 30080
Oct 31, 2008 Offering alternative to non-contact Hall Effect sensors, SV3H Series achieves 10 million rotation cycles and operates from -40 to +125°C. Units are available in 2.1 mm low-profile SMT package that can withstand lead-free solder temperatures. Automotive applications include angular detection for steering wheel, seat position, and gear shift; selector switches for climate control; position detection for power windows and sunroof; and variable resistors for dimmer control.

Sensata Technologies - Industrial Sensors Group
Attleboro, MA 02703
Oct 31, 2008 Available in monochrome/RGB/RGBi versions, Avocet offers dynamic range up to 154 dB for rendering detailed images in bright and low-light conditions without blooming or saturation. It is offered as single-box Vision Systems Platform, standard video camera for 2-box solutions, or imaging module for engineers building their own camera. Suited for advanced driver assistance systems, technology let drivers see objects normally obscured when silhouetted by bright sun and hidden in shadows.

Newson Gale, Inc.
Lakewood, NJ 08701
Oct 31, 2008 Using intrinsically safe circuitry, Earth-Rite TELLUS detects positive ground connection in common types of flammable and/or combustible gases. Unit enables compliance with guidelines of NFPA 77 and CENELEC 50405 for controlling static circuitry, by ensuring equipment is monitored to levels recommended by these standards. Earth-Rite TELLUS is suited for grounding applications where flammable or combustible liquids or powders must be transferred, mixed, or blended.

Murata Electronics North America, Inc.
Smyrna, GA 30080
Oct 31, 2008 Enabling over-current protection, PRG21/18 positive temperature coefficient (PTC) thermistor series has operating temperature range of -40°C to +105°C. Available in 0603 and 0805 sizes, units allow for resin coating, with adjacent component, for thermal sensing and protection. They can be used with LEDs to control current to dynamically verse typical resistor, and can also provide over-current protection for HEV/EV batteries.

Murata Electronics North America, Inc.
Smyrna, GA 30080
Oct 31, 2008 ELV/UL and AEC-Q200 compliant, surface mount PRF and NCP series have operating temperature range of -40 to +125°C for commercial grade and up to +150°C for automotive grade. PRF PTC thermistors are designed for overheat sensing, and provide resettable protection in circuit due to no hysteresis. NCP NTC thermistors are created for temperature measurement over wide temperature ranges, and offer same resistance and B constant in several different package sizes.

Robert Bosch GmbH
  Germany
Oct 30, 2008 Professional Series reacts to unauthorized entry with low false alarm rate due to TriFocus optical system and Sensor Data Fusion (SDF) DSP. While TriFocus optical system combines 3 precision lenses for long-, medium-, and short-range monitoring with 2 separate PIR detector elements, SDF enables intelligent simultaneous processing of signals from 2 PIR sensors, one room temperature sensor, one white light sensor, and one microwave sensor. Conventional and LSN versions are available.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Oct 30, 2008 Along with max pressure ratings to 150 psig and temperature ratings to 600°F, Series CIF features verifiable accuracy of ±2% for combustion gases, annealing atmospheres, vacuum flows, digesters, and gas mixing. Flowmeters, constructed of nickel-plated steel or optional stainless steel, can be disassembled without removal from pipeline to facilitate cleaning. Standard process connection are ¾ and 2 in. female NPT, while options include 3 and 4 in. female NPT.

International Rectifier Corp.
El Segundo, CA 90245
Oct 30, 2008 Based on TruePower(TM) technology, Model IR3720 monitors output filter inductor current in buck or multiphase converters from 0.5-1.8 V with 3.3% power accuracy and ±0.75% voltage accuracy. Output current or voltage is communicated to system controller through digital I2C interface to provide effective power management. Device provides designers with option of using resistive sensing or inductor DCR current sensing with internal thermal compensation feature.