Wilcoxon Research, Inc.
Germantown, MD 20876
Aug 20, 2008 Capable of detecting low level vibration, Model 786-500 has 500 mV/g sensitivity with 5% sensitivity tolerance to minimize electronic noise and maximize voltage output to monitoring instrument. Unit's +3 dB broadband frequency response is from 0.2 Hz to 14 kHz. Featuring acceleration range of 10 g and broadband noise floor at 250 µg, it is suited for slow speed condition monitoring applications such as cooling tower fans as well as predictive maintenance of rotating equipment.

DVEO division of Computer Modules, Inc
San Diego, CA 92127
Aug 20, 2008 Model VGA2DVB-T(TM) converts VGA graphics and text from any computer to a frequency agile digital DVB-T modulated signal, and then sends that signal to multiple HD monitors. Unit features 1,280 x 720 full screen or 1,280 x 1,024 VGA input with shrunken viewport and 720p at 16:9 output resolution. Able to be mixed with analog channels with passive mixing via RF mixer, it can be used with existing analog/digital CCTV systems and coaxial cable.

Phidgets, Inc.
Calgary, AB T2M3R7  Canada
Aug 20, 2008 Measuring pressure difference between 2 pressure intakes as well as both negative and positive pressures in range of -3.6 to +3.6 psi with maximum error rate of 5%, Model 1126 Differential Gas Pressure Sensor features 10 mA maximum current consumption. It offers output impedance of 1 kW, 3.3-5.0 Vdc voltage range, absolute pressure of 200 kPa, 20 msec warm up time, response time of 1 msec (sensor), and port dia of 2.79-3.30 mm (nominal 3 mm).

Leviton Manufacturing Co., Inc.
Little Neck, NY 11362 2591
Aug 19, 2008 Housed in watertight enclosure, non-fused PowerSwitch(TM) DS30AX includes 4 mounting feet, 7 conduit entry points, integral ground plate, and 10 A normally open auxiliary contact for remote monitoring. Enclosure measures 4.5 in. deep x 5.28 in. wide with bottom-hinged cover and front-operated, pistol-grip handle that meets OSHA safety regulations. Designed for harsh, washdown environments, housing is impact-resistant, non-conductive Valox® PBT thermoplastic with UL 94 V-0 flammability rating.

B & K Precision Corp.
Yorba Linda, CA 92887
Aug 19, 2008 Offering 40 MHz bandwidth and 500 MS/sec sample rate, model 2532 Dual-Channel Digital Storage Oscilloscope offers triggering capabilities such as pulse width and line-selectable video trigger, 11 automatic measurements, and FFT functions for debugging circuits. Measuring 11.4 x 11.8 x 5.9 in., 10 lb benchtop unit includes analog-style knobs and controls, color LCD, and USB port. It has 4,000 point record length for each channel and software to capture, save, and analyze waveform data.

IMI Sensors, Div. of PCB Piezotronics
Depew, NY 14043-2495
Aug 19, 2008 With 1 in. NPT, 90° capped elbow conduit to meet ATEX and CSA requirements, Series EX64xB7x loop-powered 4-20 mA output sensors are available with either acceleration or velocity outputs in various amplitude ranges. Sensors operate from standard 24 V loop power, making them directly compatible with existing PLCs, SCADA, DCS, and Plant Information systems for continuous vibration monitoring of overall vibration levels on critical machinery in hazardous area application environments.

Omega Engineering, Inc.
Stamford, CT 06907
Aug 19, 2008 With adjustable emissivity from .05 to .99, OS4000 Series industrial high speed fiber optic infrared transmitters are capable of measuring temperature from 392-2,912°F using 3 standard optical fields of view and 3 standard fiber optic cable lengths. CE compliant units feature built in laser sighting for lens probe positioning, linear analog output (1 mV/°, 0/5 Vdc, 0/10 Vdc, or 4-20 mA), fiber optic gain adjust, RS232 interface, and Windows based PC interface software.

Banner Engineering Corp.
Minneapolis, MN 55441
Aug 19, 2008 SureCross(TM) Temperature and Humidity Sensor is factory-calibrated to determine relative humidity (RH) to ±2% or ±3.5%, depending on model, and temperature to ±0.3°C for critical data monitoring. Available with hydrophobic membrane filter and sintered stainless steel filter, product can be paired with node featuring integral battery supply or external power source. Node can be installed as stand-alone device or work in conjunction with SureCross Wireless Network gateway.

Analog Devices, Inc.
Norwood, MA 02062-9106
Aug 19, 2008 Supplied in 23 mm³ package, ADIS16365 combines 3 gyroscopes and 3 accelerometers to provide 6 degrees-of-freedom motion sensing. It immediately detects small shifts in position of GPS antenna, promoting real-time signal correction and heading accuracy. Fully calibrated and compensated for various sensitivities, product reduces design time/complexity with automatic sensor point-of-reference realignment, digital range scaling, autonomous self test, and embedded sensor monitoring.

Mistral Solutions
Bangalore   India
Aug 19, 2008 Designed for analyzing flight parameters, Pulse Code Modulation (PCM) Telemetry Encoder is comprised of DAQ, conversion, frame processing FPGA, and PCM output sections. Fully configurable onboard system, based on AMCC PPC405, supports multiplexed sampling of 64 analog channels and comes in 140 x 110 x 115 mm MIL grade aluminum enclosure. MIL-STD-1553 Monitor/Remote Terminal offers dual-redundant bus interface to monitor and capture on-board 1553 bus transactions.

Agilent Technologies, Inc
Santa Clara, CA 95051
Aug 19, 2008 Available with single or dual wavelength options at 1,310 or 1,550 nm, Agilent N4374B lightwave component analyzer (LCA) offers accurate and traceable electro-optical S-parameter for transmitter and receiver test. Along with integrated optical average power meter, it features accurate responsivity test with less than 0.8 dB uncertainty, specified absolute accuracy of absolute responsivity, and 75 W support with minimum loss pad for CATV applications.

Gao tek Inc.
Toronto M1B 2K4  Canada
Aug 19, 2008 Model GAO2432 measures power from continuous waves, and calculates RF power lever of pulse modulated signal. Calibration and measurement of signals can be manually observed on front panel or controlled through GPIB interface on rear panel. Designed for ATE system, model GAO2433 dual-channel (A, B) meter can configure two 23200 series power probes, which can accurately measure power of continuous waves and pulse modulated inputs from 2 channels, displaying results on LCD screen.

Implicit Monitoring Solutions, L.P.
Farmers Branch, TX 75234
Aug 18, 2008 Encompassing Frac and Well Test monitoring services, Intellisite RTViewer delivers second-by-second data in real-time to users anywhere via Internet. Frac Monitoring Service offers up to 40 channels of data and records entire frac operation, allowing users to review different timeframes and look at different information. Well Testing Monitoring Service lets user select preferred interval range in readings, from 1-60 sec. This information is transmitted on scheduled basis.

Allegro MicroSystems Inc.
Worcester, MA 01615
Aug 15, 2008 Offered as true zero-speed and True Power On State (TPOS) gear-tooth sensor, ATS675 incorporates single-element Hall IC with optimized custom magnetic circuit that switches in response to magnetic signals created by ferrous target. Digital IC eliminates detrimental effects of magnet and system offsets, and peak-detecting DACs set switching thresholds of device. Solution dynamically adapts to typical operating conditions found in automotive camshaft speed sensing applications.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Aug 14, 2008 Combining accurate CO2 measurements with passive temperature output, wall mount Series CDW features Non-Dispersive Infrared sensor that continuously updates calibration through proprietary logic feature, which limits amount of error due to drift. Series is suited for building automation systems to help control fresh air intake in room.

Wilkens-Anderson Co. (WACO)
Chicago, IL 60651
Aug 14, 2008 Suited for can diameters from 2-3 in., Seam Thickness Gauge features special design which aligns position of digital indicator precisely with chuck wall angle, and offers accurate seam thickness measurement with .0005 in. resolution. Measurement readings can be transferred automatically into WACO® Accuseam system.

Allegro MicroSystems Inc.
Worcester, MA 01615
Aug 14, 2008 Operating from 1.65-3.5 V without external pull-up resistor, Model A1174 features internally or externally controlled sample and sleep periods for track ball/scroll bar applications. When sufficient positive magnetic field is present on device, output transitions to low state until negative field of sufficient strength latches device output into high state. Housed in 6-pin MLP microleadframe package, unit is suitable for portable devices that employ rotational detection systems.

Measurement Specialties, Inc.
Hampton, VA 23666
Aug 14, 2008 Packaged in stainless steel housing, Model 3700 is available in ranges from ±2000 to ±6000 g and is suitable for long duration shock transient measurements. MEMS piezoresistive shock accelerometer incorporates mechanical over-range stops that offer shock protection to greater than 10,000 g. Unit comes with PFA jacketed cable in customer selected cable length.

Measurement Specialties, Inc.
Hampton, VA 23666
Aug 14, 2008 Available in ±10g to ±500g ranges, Model EGPE-1A provides flat frequency response up to 15 kHz. IEPE type accelerometer is hermetically sealed and features through hole mount installation for use with standard mounting screws. With micro-g resolution, unit is suited for broad range of vibration measurements.

Toshiba America Electronic Components (TAEC)
Irvine, CA 92618-1811
Aug 14, 2008 Incorporating photodiode, current amplifier, and luminous-efficiency correction, Model TPS859 can turn keypad or LCD backlight on or off, or adjust brightness according to ambient light condition. Unit features typical light current of 230 µA, and optical filtering technology, which enables incandescent to fluorescent light sensitivity ratio of 1.0. Housed in 1.6 x 1.6 x 0.55 mm surface mount package, TPS859 operates from 1.8-5.5 V, making it suited for battery-powered applications.