Radar Safety Technologies, LLC
Troy, MI 48084-2468
Apr 01, 2008 Using radar technology based on Safe Braking Distance, FrontAlert(TM) Collision Alert System (CAS) detects hazards in vehicle's path and alerts driver of potential collision via 3.5 in. LCD interface. Green light indicates system is active, and yellow light indicates detected object (no action needed). Red light and alert tone tell driver to take caution, decelerate, brake, or take safe evasive action to avoid collision. Alerts stop once corrective action has been taken.

Ophir-Spiricon Inc.
Logan, UT 84321
Mar 25, 2008 USB 2.0 Silicon CCD Cameras, Models SP503U and SP62OU, are designed for laser beam measurement applications and capture wavelengths from 190-1550 nm in both continuous wave and pulsed mode. Model SP503U has resolution of 640 x 480 pixels, while Model SP620U has resolution of 1600 x 1200 pixels. Characteristics include automatic or manual gain control, up to 64 dB dynamic range, and photodiode synch. Both cameras include USB 2.0 interface, beam analysis software, and multiple mounting options.

Seegrid Corporation
Pittsburgh, PA 15201
Mar 21, 2008 Employing Industrial Mobile Robotics technology, vision-guided Model GT3 moves through manufacturing, warehousing, and distribution operations utilizing stereo cameras to build 3D map of environment. It then uses map and its own reasoning ability to navigate predetermined path to complete assigned transport task. Designed to free up skilled employees, GT3 pulls carts, delivers palletized materials, and positions supplies without wire guides, magnets, or lasers.

Orbitform
Jackson, MI 49204
Mar 18, 2008 Weld Tip System (WTS) for robotic spot welding inspects spot welding electrodes and ensures that face diameters and general appearance meet acceptance criteria. It incorporates CURE® technology (Concurrent Universal Recognition Engine) memory processing architecture and is suited for all welding cells.

Jungheinrich Lift Truck Corp.
Richmond, VA 23231
Mar 14, 2008 Featuring 24 V, 3-phase AC-drive technology, Model EKS 110 enables operators to pick stocked items from 1st, 2nd, or 3rd level of racking. Truck offers lifting capacity of 2,200 lb, and can pick up pallets or crates both longitudinally and crosswise. With L version, platform and load section can be raised up to 118 in. allowing items to be picked from heights up to 15 ft. Auxiliary lift, or Z version, allows forks to be positioned at ergonomically correct height for operator.

Stanley Assembly Technologies
Cleveland, OH 44143-2328
Mar 04, 2008 Utilizing position monitoring technology, Tool Position System (TPS) keeps track of assembly tool location and can set specific control parameters for each fastener. It is available for articulating arms from 10-4,000 Nm, and sequence of XYZ fastener positions can be programmed to ensure assembly to specifications. Along with 5 or 10 in. color touchscreen HMI, other features include socket tray option, PLC with built-in power supply, Teach mode, and part pattern storage.

Yamaha Robotics
Edgemont, PA 19028
Mar 04, 2008 Designed with minimal parts for reduced maintenance concerns, YK900XG uses long-life grease and features directly connected (belt-less) motor and reduction system for Z and R axes. Absolute type resolver is used for position detector, eliminating need for return-to-origin action, and positioning accuracy is +0.02 mm for XY axes. Piping and wiring can be designed in compact layout, and special controller is available to facilitate execution of complicated operations.

EPSON Factory Automation/Robotics
Carson, CA 90746
Feb 20, 2008 Available in 168 models ranging from 450-1,000 mm in reach, G-Series combines smart motion control technology with high rigidity arm design to achieve optimum speed and precision with minimal vibration. Robot arms are available in standard, Class 10 Clean, or IP54/65 configurations as well as tabletop, wall, or ceiling mount versions. Vision Guidance, DeviceNet, Profibus, Ethernet IP, and Microsoft .NET support are optional.

Panasonic Factory Solutions Company of America
Buffalo Grove, IL 60089
Feb 15, 2008 Featuring bus communication interface to control lift arc start and end, TAWERS-Aluminum MIG can detect when current is flowing and retracts to take pressure off wire, resulting in reliable arc ignition. It uses 3 motor system to ensure accurate wire feed, and features syncro-weaving function and servo feeder for real-time parameter adjustment from thick to thin materials. Product can also use high voltage touch sensing through aluminum oxide, which prevents wire bending.

SAS Automation, Ltd.
Xenia, OH 45385
Feb 13, 2008 Model GRZ 32EC-30 Actuated Rib Gripper removes automotive bumper fascias from "A" side of mold. Featuring 30 mm stripper stroke that has adjustment capabilities by increasing or decreasing cylinder pin to fit any size application. Gripper and cylinder assemblies are mounted on bearing rail to help support load of part being pulled from mold. Unit has custom mounting bracket to allow perpendicular or parallel mount to accommodate for specific application.

Nachi Robotic Systems, Inc.
Novi, MI 48375
Feb 12, 2008 Supporting payload capacities up to 30 kg, Presto MR20 offers 7 axes of motion that enable emulation of human arm motions for performing complicated work processes in constricted work areas. Robot is controlled by Nachi AX20 series controller and offers horizontal reach of 1,260 mm and repeatability of ±0.1 mm. Additional features include two 6 mm through-arm pneumatic lines, 18 conductor signal cable, and through-arm support for servo gripper tooling.

Meritor WABCO
Troy, MI 48084
Feb 08, 2008 Designed for commercial vehicles, OnGuard(TM) consists of forward-looking, radar-based adaptive cruise control system that can detect multiple moving and fixed objects at distances up to 500 ft. System coordinates responses from engine, transmission, and anti-lock braking systems through communications across SAE J1939 data network. Active braking automatically uses vehicle foundation brakes to alert driver and decelerate vehicle when pre-set vehicle following distance is compromised.

KUKA Robotics Corp.
Clinton Township, MI 48036
Jan 31, 2008 With working envelope of over 1,400 mm, Model KR 5 arc can handle payload of 5 kg and supplementary load of 12 kg. Space-saving and lightweight unit can be mounted on floor or inverted on ceiling, and features high continuous-path accuracy. Model KR 5 arc HW (Hollow Wrist) comes with protection rating of IP54, and has fluid supply system integrated into arm. Both units weigh 120 kg.

Yamaha Robotics
Edgemont, PA 19028
Jan 31, 2008 NXY Series Cartesian robots use nut rotation-type hollow shaft motor for x axis that drives ball nut directly with no restriction of whirling speed even when using long stroke. Robots offer 2,000 mm stroke, max speed of 1,200 mm/sec, and maximum payload of 25 kg. They feature resolver for positioning system, high performance guide, and rigid frame, making them resistant to environmental conditions. Double Y axes are available as standard.

Kolver USA
Westford, MA 01886
Jan 23, 2008 Available in pistol or inline configuration, Multi Torque current-controlled electric torque screwdriver and Smart Arm System provides flexibility and control via 8-in-one tool combination. Clutch-less design works with programmable controller featuring up to 8 different torque values, which include ramp time, rundown speed, slow stop, auto-reverse, and hard/soft joint capability. System identifies up to 200 fastener locations in correct sequence and delivers torque from 4-132 lb-in.

Applied Robotics, Inc.
Glenville, NY 12302
Jan 21, 2008 Able to integrated with commercially available robots, Smart Gripper 2.1 features universal operating platform and closed-loop, encoder-based positioning of robotic fingers. Direct-drive solution, operated using 24 Vdc discrete signals, offers adjustable grip force and has built-in controller. Up to 32 motion programs can be selected from non-volatile memory via 5 discrete input lines, and status can be sent back to controller via 3 discrete output lines.

FANUC Robotics America, Inc.
Rochester Hills, MI 48309 3253
Jan 18, 2008 LR Mate 200iC/5L 6-axis mini-robot with iRVision (built-in vision) is suited for high volume applications or small batch production. It can be mounted in variety of positions including floor, tabletop, inside machines, angle, and invert. ROBOGUIDE-WeldPRO simulation package models system and downloads programs to robot, which run without touch-up. Vision Shift feature eliminates usual touch-ups and verifications associated with off-line programming or fixture and tool changes.

Nachi Robotic Systems, Inc.
Novi, MI 48375
Jan 16, 2008 With compact design, Presto Models ST70L and ST100 are suited for high-density/multi-layered robotic installations. Both can be used to mount lightweight spot welding guns, and, with significant allowable wrist torque, units can also support large material handling grippers. Optional integrated dress package is available.

Crown Equipment Corp.
New Bremen, OH 45869
Jan 15, 2008 Whether used for pallet handling, picking at heights, or transport applications, SP 3500 Series is built for stability, safety, and security. Access 1 2 3® Comprehensive System Control delivers real-time braking, steering, and linear speed control adjustments under changing conditions, and Load Path Stability Design distributes force evenly through mast, platform, frame, and drive unit. Solution also incorporates wide-screen platform window and twist grip control handle.

Bosch Rexroth Corp.
Hoffman Estates, IL 60192
Jan 15, 2008 Combining motion and logic with robotic control, IndraMotion MLC controller is capable of up to 64 axes of control with ability to handle up to 8 robotic kinematics simultaneously. It uses standard IEC programming controls for robotic functions and features dynamic belt synchronization for multiple conveyors as well as integrated vision system interface. With more than 100 ready-to-use kinematics for Delta, SCARA, and Cartesian style robots, unit offers full 6-axis path planner.