Master Magnetics, Inc
Castle Rock, CO 80104
Jul 03, 2008 Meeting need of tough industrial applications for both indoor and/or outdoor work areas such as yard, garage, parking lot, workshop, or jobsite, Model MFSM14RX Heavy Duty Magnetic Sweeper with Release picks up small ferrous metal objects such as shavings or nails that could cause injury or costly tire repairs. Featuring 14 in. sweeping width with overall wheelbase of 15.125 in., sweeper has 6 in. dia rubber wheels, weighs 21 lb, and includes 48 in. sturdy handle.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
Jun 25, 2008 Featuring ergonomic design that provides operator comfort and gripping power, direct drive Torq2(TM) HDP Series is appropriate for soft draw applications, such as wood screws, self-tapping screws, or trim screws. Sculpted thermoplastic elastomer housings help deliver balanced, non-fatigue performance, while quick-change collet facilitates bit changing.

Emerson Electric Co.
St. Louis, MO 63136 8506
Jun 20, 2008 Though specifically designed for use on stainless steel, Model 35S Tubing Cutter cuts copper, steel, and aluminum tubing. It features ergonomic X-CEL knob and roller bearings that minimize friction while optimizing cutting speed. Constructed of hardened steel, Models 227S and 223S inner-outer reamers include integrated measurement tools. Model 227S features 45 cutting edges to allow for inner reaming and outer deburring or beveling of ½-2 in. tubing, while Model 223S has 36 cutting edges.

Northfield Precision Instrument Corp.
Island Park, NY 11558
Jun 20, 2008 Model 1200 air chuck incorporates precision, quick change sub-jaws. Top jaws have tre-panned groove that engages with precision ground bore of sub-jaws. As jaws are tightened, flexible tab expands into tre-panned groove, pulling jaws against ground bore and loading jaws in position with zero play. This results in top-jaw/sub-jaw connection with repeatability to 1/10,000. Chucks are stainless steel and come in 2- and 3-jaw design.

Lowell Corp.
West Boylston, MA 01583
Jun 19, 2008 Model 151 Double Shot dedicated ratchet wrench and 151T socket ratchet wrench are available with 1½ in. fat grip that makes using tools more comfortable and secure while reducing worker fatigue. Bolt-thru design of both models lets bolts pass entirely through socket so nuts can be secured on any threaded length. Featuring fluorescent orange sockets to optimize tool visibility, ratchets feature reversing control located in head and are semi-enclosed to minimize fouling.

Hitachi Power Tools
Norcross, GA 30093
Jun 18, 2008 Weighing 2 lb and measuring 5½ in. in length, Model WH10DL utilizes 10.8 V Li-Ion battery to drill and drive into wood, metal, and concrete. Tool features quick change ¼ in. hex chuck and variable speed trigger. By partially depressing trigger, LED light illuminates work surface, allowing user to see clearly to set up application. Delivering steady stream of power throughout every charge, HXP batteries are equipped with current interrupt detection system and thermal protector.

Symons
Elk Grove Village, IL 60007
Jun 18, 2008 Able to adapt to any tread and riser dimension, with no limit to number of steps, Concrete Step Wizard® facilitates process of forming concrete stairs with lumber. Rise and run of steps are determined using change in elevation, step locations are marked on stringer boards (~36 in. spacing), and Concrete Step Wizard is suspended from each mark. Riser boards, ripped across bottom edge (45° angle) for facilitated finishing, are attached to each Concrete Step Wizard to form step.

Dynabrade, Inc.
Clarence, NY 14031
Jun 16, 2008 Rotary/Random Orbital Sanding Head allows user to switch from rotary to random orbital action by pushing one button. Utilizing electric or air powered tool, user operates pad in rotary (cut) mode for initial buffing and removing dust nibs, light scratches, oxidation, and orange peel. Random orbital (polish) mode is suited for buffing surfaces to swirl-free finish free of haze or halo effects. Product is offered in 5/8 in.-11 female thread size to fit buffers up to 3,200 rpm.

Graco Inc.
Minneapolis, MN 55440
Jun 13, 2008 AirPro Air Spray Guns have air cap and nozzle design that optimizes spray performance and mimimizes air consumption. Guns are weight balanced to enable steady flow rates and feature sensitive trigger pull to reduce operator fatigue. Spry Guns are suitable for automotive, metal, wood, waterborne, high wear, and adhesive applications.

ITWRansburg Electrostatic Systems
Toledo, OH 43612
Jun 06, 2008 Offering transfer efficiency that minimizes wasted material in liquid coatings industry, Vector(TM) Solo integrates Ransburg atomization and electrostatic technologies to ensure consistent and reliable finish. Ergonomic design of this 10.37 in. long, 30 oz gun includes vibration dampening and facilitated trigger pull to lessen worker fatigue. Product supports air/fluid operating pressures to 100 psig, max fluid temperature of 120°F, and max fluid delivery of 1,000 cc/min.

Dynabrade, Inc.
Clarence, NY 14031
Jun 06, 2008 Suited for use on moldings, raised panels, and intricate profiles, air-powered Lightweight Dyninger offers adjustable speed from 0-950 rpm and produces uniform, smooth surfaces. Spindle-Mount and Arbor-Mount versions are available, both utilizing 4 in. abrasive sanding stars. Industrial-rated solution can be used for blending and scuffing sealer coatings and flat surfaces. It also eliminates raised grain and reduces loose fibers when whitewood sanding.

Metabo Corp.
West Chester, PA 19380 4243
Jun 05, 2008 Supplied in heavy-duty carrying case, 4-piece 18 V cordless combination kit includes SBZ 18 hammer drill/driver, ASE 18 reciprocating saw, KSAP 18 circular saw, and MLA 18 flashlight. Two 18 V batteries, featuring Li-Power lithium-ion technology, are also included for powering SBZ 18, ASE 18, and KSAP 18 in various construction applications. Air-cooled battery charging system, AC30 Plus, also comes with kit.

Keyence Corporation of America
Woodcliff Lake, NJ 07675
Jun 05, 2008 Operating in X, Y, and Z directions, MD-V9900 series can mark difficult shapes such as cylinders, cones, and inclined planes at speeds up to 12,000 mm/sec without compromising character clarity. System incorporates Dual End Pumping Cavity and offers 42 mm variable focal length as well as distortion-free, 300 x 300 mm marking area. Along with 3-axis control, use of special lens system eliminates need for mechanical adjustment.

Expand International of America, Inc.
Stratford, CT 06615
Jun 03, 2008 Featuring rigid plastic cover to prevent overheating, 50 W, L3-BLA-50US spotlight fits all Expand retractable and non-retractable products. It includes dimmer switch for adjusting brightness, fitting that securely holds light bulb in place, and cord holder that prevents tangling. Spotlight is ETL-certified under UL, CSA, and CE and has been approved according to Intertek-Semko S-mark. Protective black nylon bag allows for secure transportation.

Del City
Milwaukee, WI 53209
May 30, 2008 Featuring ergonomic, cushioned handles, line of Circuit Alert(TM) Tools includes screwdrivers, wire strippers, pliers, flashlights, and utility knives, all with built-in removable voltage detector that produces audio and visual alert when it detects live circuit. Tools are made of forged steel for light weight, and many are multifunctional for completing variety of tasks.

Acument(TM) Global Technologies North America
Sterling Heights, MI 48314
May 30, 2008 Torx Plus® Maxx concentrates highest available levels of torque directly to studs, ball studs, and threaded fasteners. Studs feature drive lobes that extend into threaded portion of fastener point, and full engagement between drive socket and assembly tool spreads surface contact. Established fastening angle enables stems to achieve up to 95% of blind hole torque before failure. Tool can also hold threaded parts, studs, and ball studs stationery while nut is torqued to proper setting.

LEDtronics, Inc.
Torrance, CA 90505
May 29, 2008 Operating on 3 replaceable AAA-cell-type alkaline batteries, Micro High-Power LED Flashlight has 1 W, 80-lumen LED chip that emits over 4,300 end ftc of bright Cool White (8,000 K) light. Measuring 4.5 in. long and over 1 in. wide, it weighs 3.5 oz without batteries and 4.8 oz with 3 AAA batteries. Product features push-button switch in back of unit to operate LED light, and Focusable Lens with narrow- and wide-beam lens design that allows continuous varying of light beam width.

Hitachi Power Tools
Norcross, GA 30093
May 23, 2008 Model N5010A stapler fires ½ in. standard-crown 16 ga staples ¾-2 in. in lenghth. Using 15/16 in. wide-crown 16 ga staples from 5/8-2 in. long, N5021A also features dial for adjusting drive depth. Both devices weigh less than 5 lb and include nose with tool-less release for extraction; top-load, stainless steel plated plastic magazine with open design for monitoring staple quantity; and elastomer grip. Cylinder valve firing mechanism drives up to 13 staples/sec.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
May 22, 2008 Available with torque ranges from 22-115 lbf-in, Torq2(TM) HPS Series pistol grip drivers are suited for soft draw applications such as wood screws, self-tapping screws, or trim screws. Operator controls torque of positive clutch tool by varying pressure applied to driver, and ergonomic design lends to operator comfort and gripping power. While sculpted thermoplastic elastomer housings promote balanced, non-fatigue performance, quick change collet facilitates bit changing.

Klein Tools, Inc.
Lincolnshire, IL 60069
May 20, 2008 Comprising of 7 screwdrivers and 5- or 7-piece set (Cat. Nos. JSDS01 and JSDS02), Journeyman(TM) line of screwdrivers have hard steel blade machined with precision ground tip for exact fit into fastener. They feature tri-lobe handle for generating maximum amount of turning power. Tools come in various tip styles including 3/16 in. cabinet (Cat. Nos. JSD4C06 and JSD6C06), ¼ and 5/16 in. keystone (Cat. Nos. JSD4K08 and JSD6K09), and Nos. 1-3 Phillips (Cat. Nos. JSD4PH1, JSD4PH2, and JSD6PH3).