Master Bond, Inc.
Hackensack, NJ 07601
Mar 19, 2008 One component, optically clear, non-yellowing UV15-7DC is designed for bonding, sealing, and coating applications. Cure times range from 5 sec to 2-3 min depending upon wave length, intensity of UV light, and thickness being cured. Heat curing schedules are 10-30 min at 250-260°F. System adheres to glass, metals, plastics, polyester films, and polycarbonates, and exhibits Shore D hardness of greater than 70 and elongation of 65-75%. Tensile strength is 5,460 psi.

TENNANT
Minneapolis, MN 55426
Mar 13, 2008 With VOCs below 250 g/L, WearGuard - CRU(TM) 250 Topcoats meet VOC requirements of LADCO, OTC, and Chemicals Control Branch of Environment Canada. Products offer UV light stability, light reflectivity, and ability to withstand Skydrol®, jet fuels, and other industrial chemicals. Available in white, light gray, and gray, coatings come in 100% aliphatic, non-yellowing formula to maintain appearance over time.

Epner Technology, Inc.
Greenpoint, NY 11222
Mar 07, 2008 Laser Gold coatings, used as lining of IR Lightpipes and Waveguides, promote optimal IR reflectivity, which is essentially flat from 1-12 micron. Reflectivity levels, exceeding 99%, have been recorded above 1.5 micron for durable, cleanable surfaces from 0.01-100 micron thick. Lightpipes with IR coatings are custom built, straight and curved, with polished bores. Diameters range from under 1 mm to 400 mm, with varied lengths to 1 m long, and typ IR reflection above 98% from 1.0-12+ microns.

Huron Technologies, Inc.
Leslie, MI 49251
Mar 05, 2008 High solids Release Coating 7523 delivers optimal release, whether used for high production automotive seating lines, which typically run TDI-based foam, or lower volume seating applications for office furniture. Available in 5 gallon pails, 55 gallon drums, and 275 gallon totes, product can be applied with spray gun as well as automated or robotic spray systems.

Bayer MaterialScience, LLC
Pittsburgh, PA 15205-9741
Mar 04, 2008 Formulated specifically to protect metal or concrete industrial roof systems, Baytec® SPR 185A FR is certified for use in high-velocity hurricane zones and has passed UL790 test for fire resistance of roof covering materials. Spray system stands up to demanding environments and offers resistance to ozone, hydrolysis, and many chemicals. Because it is spray applied, Baytec SPR 185A FR eliminates time-consuming application process of rolled sheet.

West Development Group
LaGrange, OH 44050
Feb 29, 2008 System 14(TM) is comprehensive roofing solution that delivers complete range of products, including silicone sheet goods, skylight glazing, silicone sealants/coatings, and spray polyurethane foam (SPF) insulation. It features zero VOC coating (HSS 535) applied over soy-based SPF, creating moisture-resistant seal. Silicone topcoat forms self-flashing seal that resists oxidation, wind-driven rain/snow, ozone, and chemicals, and offers resistance to cracking and peeling.

Nordson Corporation
Amherst, OH 44001
Feb 22, 2008 Featuring plug-and-play design, Encore Manual Spray System is available in 5 mobile configurations that include 2 vibratory box feeder models and 3 different capacity hopper sizes. Gun includes PowerPurge(TM), which cleans powder path from base of handle completely, delivering consistent spray patterns and powder deposition. Incorporating primary electronic and pneumatic components in one enclosure, control unit provides digital closed-loop flow control.

Raymarine Inc.
Nashua, NH 03063
Feb 21, 2008 Marine Shield Professional Marine Finishing System is comprised of 5 products that, together, provide complete cleaning, restoration, and protective solution for boats. Marine Sealant protects against salt water, acid rain, and UV rays, while Restoration Compound removes scratches, heavy swirls, and oxidation from gel coats/painted surfaces. Heavy Duty Cleaner and Concentrated Boat Wash are also included, along with Marine Electronics Screen Cleaner that addresses display maintenance.

WOOD KOTE PRODUCTS, INC
Portland, OR 97211
Feb 18, 2008 Intended for interior applications, Jel'd Poly Kote 275 contains less than 275 g/l of Volatile Organic Compounds. It can be applied with cloth, requires no sanding, and can be re-coated within 2-4 hr. Product does not run or drip and is often used on overhead work and intricate surfaces such as stairway railings and balusters. Jel'd Poly Kote is available matte only, however, gloss level increases with each successive re-coat.

Line-X of Minneapolis
Minneapolis, MN 55422
Feb 07, 2008 PAXCON PX-2100 high-performance chemical formulation shields personnel and equipment from ballistic fragmentation or spalling by encapsulating bullets and other ballistic objects, which will remain in-tact and pose no secondary damage. It can be sprayed over any surface hard enough to cause projectile to spall, such as aluminum, ceramic, or steel.

Sun Chemical Corp.
Northlake, IL 60164
Feb 06, 2008 Including MTG-FORM(TM) and MTG-NF(TM), MTG(TM) UV inking systems are suited for use in making formable and non-formable automotive, appliance, cell phone, and medical parts. Both mar- and scuff-resistant MTG sets can be used as standalone hard coats or can be blended together to alter desired finish, and are available in matte, gloss, or texture clear finishes. MTG-FORM(TM) formable UV ink can stretch up to 1.5 in. as plastic parts become 3D.

Valspar Corp., The
Wheeling, IL 60090
Feb 05, 2008 Drying in as little as 2 hr, polyurethane Valsport WP-4.1 Fast Dry 350 Sanding Sealer is formulated to seal bare wood floors and produce optimum clear surface for finish coats. Valsport WP-8.1 Sports Floor 350 Finish is clear and ages to naturally golden amber while protecting wood. Both durable oil-modified urethanes have VOC levels of less than 350 g/L and can be used individually with compatible products or together as complete wood finishing system.

Rhino Linings USA
San Diego, CA 92121
Jan 30, 2008 Formulated with aliphatic chemistry, FastFloor(TM) hybrid polyurea coating solution bonds to various substrates and has rapid cure capability that supports light foot traffic within 2-4 hr. FastFloor HB is formulated for industrial floors, while FastFloor DF utilizes paint chips, colored quartz, or other flakes for decorative floors. Both 2-component and color-stable products, applied with hand-roller, brush, or squeegee, are resistant to abrasion, impact, chemicals, and UV exposure.

Birchwood Casey
Eden Prairie, MN 55344 2138
Jan 30, 2008 TRU TEMP® CNC non-polluting process uses integrated programmable hoist and tank to automatically process iron and steel components with black oxide finish. Operating as self-controlled unit, repeatable solution employs digital Allen Bradley PLC with manual joystick backup. It is supplied as standard with 110 gal tank line system that has output capacity of 4,000-6,000 lb per 8 hr shift. Process program handles up to 3 loads concurrently, with cycle time of 28 min.

Biosafe, Inc.
Pittsburgh, PA 15219
Jan 29, 2008 Supplied as solid crystalline powder or in masterbatch, BIOSAFE® HM 4100 prevents staining and degradation caused by bacteria, mold, mildew, and fungi. Its structure is engineered to puncture and rupture cell walls, eliminating chance for microorganisms to mutate/adapt and become resistant to antimicrobial component. Achieving effective microbial reductions within 1-4 hr, nontoxic polymer will not migrate out of plastic or rub off surface and does not affect optical properties.

Deposition Sciences, Inc.
Santa Rosa, CA 95403
Jan 23, 2008 Proprietary tooling and processes allow Filter Coatings on Tubes technology to be applied to outside of tubes used to trim spectral output of light sources in various applications. Up to 45 cm long and 7 cm nominal OD tubes can be coated with durable and precision optical filters that range from near ultraviolet to infrared regions of spectrum. Heat- and temperature fluctuation-resistant, uniform coatings meet abrasion, adhesion, humidity, and salt fog tests of Mil-C-675 standards.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jan 17, 2008 Pyro-Paint(TM) 634-BNSC is single part, odorless, water-dispersible coating formulated to resist molten metals, glasses, plastics, and salts as well as non-ferrous metals such as molten aluminum and magnesium. It provides highly lubricious and chemically resistant interface between molten material and underlying refractory structure. Applied with brush, roller, or spray equipment, coating dries at room temperature in 1-2 hr and cures fully in 1-2 hr at 200°F.

Infratrol Manufacturing Corp.
New Berlin, WI 53151
Jan 17, 2008 All-electric ecoflex is designed for powder coating of small parts and comes in 4 standard sizes, with smallest requiring 700 sq ft of floor space. System requires no drains and generates no sludge or hazardous waste, no hazardous air pollutants, and no ozone-depleting substances.

Oerlikon Optics
Balzers   Liechtenstein
Jan 10, 2008 Applied at 390°F, BALINIT® ARCTIC Coatings enable mold materials with low tempering thresholds to be coated without distortion, loss of hardness, or reduction in corrosion resistance. BALINIT A has surface hardness of 2,300 HV and 0.4 coefficient of friction against steel, while BALINIT D has surface hardness of 1,750 HV and 0.5 coefficient of friction against steel, and nano-layered BALINIT FUTURA NANO ARCTIC has 3,300 HV surface hardness and 0.5 coefficient of friction against steel.

Chemetall Oakite Products, Inc.
Berkeley Heights, NJ 07922 2712
Jan 10, 2008 Providing iron phosphate coating for ferrous metals, Chem Cote 3010 works at temperatures below 90°F, eliminating use of any burner. It is pre-paint treatment for iron and steel that makes resulting surface highly resistant to corrosion.