Bayer MaterialScience, LLC
Pittsburgh, PA 15205-9741
May 22, 2008 Polyurethane raw materials can be used to formulate self-healing coatings that are scratch- and chemical-resistant, fast-curing, and meet VOC regulations, such as high solids and waterborne coatings. Offering high reactivity and full crosslinking even at low-temperature curing, 2-component polyurethane coatings include hydrogen bonds that allow for thermoplastic flow to relieve stress and allow self-healing of defects.

Huron Technologies, Inc.
Leslie, MI 49251
May 16, 2008 Mold Release Coating 7575 maintains details in compression molding process using vinyl ester resins. Designed for molding products that must stand up to harsh, corrosive environments, coating can be used with chemical containers, ball and butterfly valves, wind turbine blades, pump housings, and functional building panels. It is available in 5 gal pails and 55 gal drums.

LINE-X Franchise Development Corporation
Santa Ana, CA 92707
May 16, 2008 LINE-X ReNew(TM) bedliner enhancement system is used to repair any brand of spray-on bedliner and upgrade it to quality of new LINE-X spray-on truck bedliner. It repairs gouges, brings back texture, and protects against UV damage as well as fading, moisture, corrosion, dust, scratches, and most chemicals. Formulated with KEVLAR®, it also features chemistry that permanently bonds to any polyurethane and polyurea coating.

Enviroline Group (IECC)
Pompano Beach, FL 33069
May 13, 2008 Two-component, high-gloss Envirothane® 550 is suited for industrial and commercial applications requiring color retention as well as UV, chemical, abrasion, and moisture resistance. Product is available in 22 standard colors, including 5 safety colors.

Steelcote Manufacturing. Co.
St. Louis, MO 63103 2990
May 07, 2008 Featuring water-thin viscosity, Floor-Nu® Penetrating Sealer penetrates as deep as ¼ in. into pores of concrete or masonry surfaces in order to protect against effects of moisture, freeze/thaw cycles, salts, oils, and specific chemicals. This 2-component (1A:1B) clear epoxy, which can also be used on insulation and wood or concrete floors, locks in loose aggregate on surface and forms hard, impenetrable sub-surface. Coating contains 48% solids by volume.

West Development Group
LaGrange, OH 44050
May 07, 2008 Designed for use on sprayed-in-place polyurethane foam, HSS 535 and HSS 540 R2R(TM) one-component coatings are tack-free within 1-2 hr and cure at normal temperatures in 2-6 hr by reacting with moisture in air, forming flexible moisture-free seal. Because coatings are solvent-free, they are environmentally friendly while providing same functionality as petroleum-based roofing materials. Both passed ASTM E108 flame spread test and obtained UL Class A fire rating.

Price-Driscoll Corp.
Waterford, CT 06385
May 01, 2008 Formulated with non-flammable solvent, Value Line series mold releases, mold cleaners, and rust preventives are EPA compliant and contain no Methylene Chloride. Mold releases types include silicones, paintable silicones, food/medical grade non-silicones, PTFE dry film, and Zinc Stearate dry powder. Gentle Clean Mold Cleaner is suitable for use on solvent-sensitive plastics and tooling, while Rust Armor rust inhibitor is suited for all metal molds tooling.

Valspar Corp., The
Wheeling, IL 60090
May 01, 2008 Developed for painting contractors, low VOC ZAP Interior/Exterior Latex Primer blocks typical household stains caused by wax crayons, pencil, pen, china markers, ketchup, mustard, and grease. ZAP Interior Oil-Based Primer blocks difficult-to-remove stains including those from smoke, fire, water damage, and tannin bleed, and seals in odors such as nicotine, fire/smoke damage, and pet odors. Both provide mildew resistant finish, require one-coat application, and typically dry in 1 hr.

Dampney Co., Inc.
Everett, MA 02149
Apr 30, 2008 Thurmalox® 8886 Series delivers long-term protection in weathering conditions and creates barrier against attack from glycol cooling agents and synthetic lubricants at temperatures up to 450°F. Available in clear, black, and custom OEM colors, these 2-component silicone copolymer coatings can be applied by conventional and airless, HVLP, HTE, or assisted airless spray equipment. Coatings adhere to clean, smooth steel, copper, and aluminum substrates.

Sto Corp.
Atlanta, GA 30336 5609
Apr 30, 2008 Suited for new construction or renovation, StoCreativ® Granite acrylic-based interior and exterior wall finish is trowel-applied and comes in 10 colors. Use of this product, which is compatible with Sto Classic Wall Claddings (including Sto Classic NExT®), helps incorporate natural looks and colors in finished walls.

SEI Chemical
Northridge, CA 91324
Apr 28, 2008 Formulated as single-component fluoro-coating, GPA-200 Graffiti Proofer® Anti-Stick can be sprayed, brushed, or rolled onto surface and dries within hours. Resulting film causes spray paints and permanent markers to crawl together and prevents their chemical adhesion. With under 20 g/L VOC content, product is resistant to chemicals and weathering and exceeds ASTM D6578 Graffiti Resistance Test requirements. Graffiti can be removed with dry towel, pressure washer, or other cleaners.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 22, 2008 Loctite® QuickStix(TM) 7088(TM) Primer enhances performance and accelerates cure of anaerobic machinery adhesives used in threadlocking, thread sealing, gasketing, and retaining applications. Featuring environmentally friendly formulation free of solvents and VOCs, product is recommended for use on plated, anodized, and galvanized parts as well as inactive metals. It may also be used on cold metals and assemblies that feature large gaps or deep threads.

Kimball-Midwest
Columbus, OH 43228
Apr 18, 2008 With ability to create deep luster on aluminum, stainless steel, chrome, brass, and other metals, Emerald-Kut liquid metal polish does not harm or remove stock. It is non-aggressive, non-toxic, and biodegradable, and can be applied with soft cloth or electric buffing equipment. Combination of extra-fine alumina powder and green chromium oxide restores dull oxidized metal surfaces to bright mirror finish for truck parts and aluminum wheels of motorcycles.

Sherwin-Williams
Cleveland, OH 44115
Apr 16, 2008 Suited for petrochemical, wastewater, power generation, and marine industries, ExpressCote HCR protects steel and concrete from chemicals and solvents at ambient and elevated temperatures. This 100% solids, chemical-resistant, glass flake-filled epoxy novolac lining allows return to full service in as little as 24 hr and walk-on condition within 5 hr when applied at 77°F with 50% RH. Solution has no VOCs and offers one-coat protection up to 50 mils. Edge retention exceeds 70%.

Sherwin-Williams
Cleveland, OH 44115
Apr 16, 2008 Free of hazardous air polluting solvents, anti-corrosive SeaGuard 6200 can be applied at temperatures as low as 20°F, making it suited for vessel maintenance during winter lay-up. Product may be used on many prepared steel substrates, including bilges and wet void areas, decks and superstructures, and underwater hulls. Applied by brush, roller, or spray, coating is suited for fabrication and new construction along with maintenance and repair.

Epner Technology, Inc.
Greenpoint, NY 11222
Apr 10, 2008 Thermal Foil Gold Coating is copper foil that is .001 in. thick, coated with Laser Gold. Laser gold plating reaches reflectivity of greater than 99% at 10 microns and greater than 98% at 1 micron. Optical coating and plating is ISO 9001:2000 certified and suited for automotive, aerospace, medical, R&D, electronic, and IR optical markets.

Master Bond, Inc.
Hackensack, NJ 07601
Apr 08, 2008 Suited for bonding, encapsulation, and coating, 2-component EP21LM-3 develops tensile modulus greater than 100,000 psi and tensile shear strength greater than 2,300 psi. Viscosity of 37,000 cps enables product to flow evenly and smoothly without application of pressure. When cured, polymer has Shore D hardness of 64 and resists thermal cycling as well as water, oil, fuels, and most organic solvents over temperature range of -65 to +250°F.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 03, 2008 Based on titanium electrodeposited oxides, Alodine® EC2(TM) ElectroCeramic Coating provides chemical, corrosion, temperature, and abrasion resistance, extending life of parts exposed to harsh operating conditions. Product readily coats aluminum, aluminum alloys, titanium, and titanium alloys, as well as aluminized, aluminum-plated, and IVD aluminum substrates. Despite hardness of 800 vickers, coating is flexible and offers suitable base for paints, adhesives, sealants, and thermal spray coatings.

Deposition Sciences, Inc.
Santa Rosa, CA 95403
Mar 27, 2008 Covering wavelengths from 400-2,500 nm, Conductive Coatings with indium tin oxide, induced transmission silver, and induced transmission gold can be applied to various substrates. They are compatible with DSI dichroic filter technology, enabled by Microdyn sputtering process, and remain stable while withstanding thermal loads and changes in humidity. Coatings can be combined with optical thin films that operate in Vis and NIR wavelengths and formulated to be broadband or spectrally selective.

Aremco Products, Inc.
Valley Cottage, NY 10989
Mar 27, 2008 Mixed in 1:1 ratio by weight, Corr-Paint(TM) CP2050 is 2-part, 100% solids, epoxy-novolac, corrosion resistant system used to protect steel components and structures. It cures fully at room temperature in 24 hr, or can be heat cured at 175° for 4 hr. Typical film thickness is 50 mils for single coat. Providing thermal shock, salt spray, and UV resistance, product is offered in CP2050-LF (long/coarse glass fibers), CP2050-FF (fine glass fibers) and CP2050-NF (no fibers) forms.