Heatbath Corporation
Springfield, MA 01102
Jun 23, 2006 Available in clear or light blue color, Alchrome® Tri-Tec coating for aluminum, aluminum alloys, and IVD deposited aluminum can be applied as spray or immersion. Aqueous coating features long-term corrosion protection and low electrical contact impedance and acts as bonding agent for paint and adhesives. Meeting Mil-C-5541 for Class 1 and 3, and ELV and WEEE standards, product is suited for automotive, aircraft, sport vehicle, architectural, and hardware industries.

Dow Corning Corp.
Midland, MI 48686 0994
Jun 23, 2006 Suited for LEDs used in diverse applications, silicone materials retain high light transmittance and optical clarity as they resist effects of high temperatures and short-wavelength exposures. Each silicone-based material enables SMT assembly of LED devices using lead-free solder and can they be formulated to adhere to variety of substrates. Materials include moldable SR-7010 resin as well as EG-6301, OE-6336, and JCR 6175 LED-protecting encapsulants.

Master Bond, Inc.
Hackensack, NJ 07601
Jun 22, 2006 Formulated to react with UV light and atmospheric humidity, UV71DC is suited for applications involving complex product geometries. Single-component product cures to produce optically clear, flexible, non-yellowing, and chemically resistant adhesive, sealant, or coating. Employed over -80 to +400°F range, compound exhibits thermal shock resistance and adheres to substrates from glass and aluminum to polyester films and polycarbonates. Tensile strength is 110 psi.

Sherwin-Williams Co. c/o Ultimate Lead Systems
Berea, OH 44017
Jun 15, 2006 Corothane® I Moisture Cure Coatings can be matched to wide range of colors in large and small batches. They include topcoats and zinc-rich primers that are designed for temperatures down to 20°F or high humidity applications. Providing abrasion and chemical resistance, single-component, VOC-compliant coatings are suitable for water tanks, clarifiers, and secondary containment.

Sherwin-Williams Co. c/o Ultimate Lead Systems
Berea, OH 44017
Jun 15, 2006 Macropoxy® 646 NSF Fast Cure Epoxy and Macropoxy® 846 NSF Winter Grade Epoxy are polyamide coatings formulated to meet toxicological and extraction test requirements of ANSI/NSF Standard 61. Macropoxy® 646 is suited for steel and concrete structures, while Macropoxy® 846 can be applied at temperatures as low as 35°F. Both are high solids and VOC-compliant. They can be brushed, rolled, or spray applied and are suited for use in water and wastewater treatment industries.

PKG Equipment Inc.
Rochester, NY 14624
Jun 07, 2006 Rhino seamless, spray-on, polyurethane linings help extend maintenance cycles by protecting against impact, abrasion, permeation, and corrosion. They also provide safety attributes such as vibration dampening, sound attenuation, and slip resistance. Non-porous linings are 100% solids tack-free within 40 sec, and adhere to various substrates regardless of shape or size. Flexibility prevents splitting, cracking, and de-lamination.

Premix Thermoplastics, Inc.
Milton, WI 53563
May 31, 2006 Available in any thermoplastic resin system, PRE-ELEC® EMI materials are one-step solutions that provide upwards of 90 dB shielding effectiveness. Compounds are offered in PP, ABS, POM, PC, PBT, PA-6, PA-66, PPS, PSul, PES, and PEEK. While products utilizing stainless steel fiber additives are available in fully compounded or dry blended forms, compounds using carbon fibers or nickel coated carbon fiber additives are available in fully compounded forms only.

Huron Technologies, Inc.
Leslie, MI 49251
May 30, 2006 Designed for heat cured silicone rubber applications, EZR-311 semi-permanent, water based mold release coating produces high quality molded parts such as automotive engine gaskets and electrical insulators. It can be used at mold temperatures of 320-360ºF. EZR-311 works with single or multiple mold cavities and is available in 5-55 gal drums.

ICS Garland Inc.
Cleveland, OH 44125
May 24, 2006 Providing protective overlayments for concrete and topcoat for decorative applications, Chemi-Cote(TM) UR 9100 is VOC compliant, virtually odorless, and can often be applied without shutting down operations. Coating is resistant to many chemicals including aromatic and aliphatic hydrocarbons, chlorinated solvents, hydraulic fluids, jet fuel, acids, alkalis, alcohol, detergents, salts, and cutting oils. Chemi-Cote(TM) UR 9100 is suited for loading docks, warehouses, and aisle ways.

Michelman Inc.
Cincinnati, OH 45236
May 23, 2006 BugBan(TM) 9000 is water-based, repulpable coating for paper and paperboard substrates that can be applied on corrugated or folding carton either off-line or in-line, using Rod, Blade, Flexo, Gravure, or Size Press application methods. EPA approved product is suited for applications including outside of corrugated surfaces, folding cartons, and wood and corrugated pallets used in transporting of food.

SP3 Inc.
Mountain View, CA 94041
May 19, 2006 Hot filament Model 650 CVD Diamond Deposition System features fully integrated process control that allows unattended operation and external monitoring. It can be configured to produce finely tuned deposition processes in nano-crystalline or micro-crystalline structures from submicron to 50 micron plus in thickness. Model 650 addresses applications such as diamond on wafers in sizes up to 300 mm, wear coatings, substrates for thermal management, and electrodes for water treatment.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 27, 2006 HiE-Coat(TM) 840-C helps improve thermal efficiency of ceramic and refractory insulated combustion and exhaust pipes as well as oven and furnace walls to 2,500°F. Demonstrating emissivity greater than 0.90, this jet-black, water-based ceramic coating will absorb and re-radiate IR energy. Cured in operation or by heating for 1-2 hr @ 200°F, environmentally friendly product is odorless and water-soluble, does not contain VOCs, and will not outgas upon curing or during operation.

GE Advanced Materials
Wilton, CT 06897
Apr 27, 2006 Eliminating use of methylene chloride, Boron Nitride (BN) Spray II coating contains high-purity, high-crystalline grade of BN that imparts optimal lubrication properties. Non-reactive formulation exhibits high-temperature resistance, optimal release qualities, and chemical stability. Product is suited for use as release agent and lubricant in applications from metalforming and glassmaking to plastics molding, high-temperature sintering, and welding and brazing.

JohnsonDiversey
Sturtevant, WI 53177-0902
Apr 25, 2006 High-solids, low-odor High Mileage provides optimized gloss build and offers black heel mark/scratch resistance. Up to 5 coats can be applied in one application without signs of stressing. Finish performs well in less-than-ideal environmental conditions such as high or low humidity. Its properties make it suited for 24-7 facilities such as hospitals or retail environments with busy aisles and hallways.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 13, 2006 Single-part, gray-pigmented Corr-Paint(TM) CP2020 polymeric coating dries and cures at room temperature to hard, non-porous, abrasion-resistant surface that is also resistant to hydrochloric, nitric, ethylene chloride, and sulfuric acids. Supplied with viscosity of 200-240 cps, product features specific gravity of 1.05 gm/cc. It provides corrosion resistance on steel components and structures exposed to oxidation and corrosive atmospheres up to 400°F.

Huron Technologies, Inc.
Leslie, MI 49251
Apr 07, 2006 Mold Release Coatings 6944, 7123, and 7153 provide clean mold release for composite friction materials such as automobile and truck brake composite products. Coatings are non-silicone, water based, dilutable concentrates available in 55 gal drums and 275 gal totes.

Nanophase Technologies Corp.
Burr Ridge, IL 60521
Mar 31, 2006 NanoTek® alumina polishing products feature nanoparticles which are approximately 80 nm. Products are available in aqueous dispersions that are stable in pH range from 4-10, and dispersions in other solvents are available for specialized applications. Alumina nanoparticles are suited for electronics, displays, and optical polishing applications.

ERSystems, Inc.
Rockford, MN 55373
Mar 31, 2006 Able to adhere to existing fluoropolymer-based paints used on metal roofs, ER KynaKote coating exhibits color retention as well as resistance to mildew and stains. Physical properties improve as it is exposed to sunlight. Eraguard 1000 QC quick cure coating dries independent of humidity, while Eraguard CleanCoat coating incorporates Teflon and Kynar to provide reflective surface that is resistant to dirt.

ZRC Worldwide
Marshfield, MA 02050
Mar 31, 2006 Suited for application in areas where VOC levels are strictly monitored and controlled, single-component ZRC-221 delivers anti-corrosion properties in one coat while exhibiting environmentally friendly volatile solvent level of 221 g/L. It meets VOC standards in all 50 states and requires minimal surface preparation. Coating resists continuous temperatures up to 350°F and intermittent temperatures up to 750°F.

Dampney Co., Inc.
Everett, MA 02149
Mar 29, 2006 Thurmalox® Stove Paint is fast drying, long lasting, and heat resistant silicone coating for stove, stovepipe, and hearth accessories. Available in variety of colors, it resists blistering, peeling, or flaking. Product comes in aerosol spray cans for application on fireplace andirons, screens and grates; barbecues; gas grills; and hibachis.