Huron Technologies, Inc.
Leslie, MI 49251
Nov 15, 2006 Providing clean mold due to less build-up on the mold surface, Mold Release Coating 7391 ensures smooth and defect-free part surface. Semi-permanent coating can be used for up to 30 production runs between applications and repeated without cleaning the mold each time. Available in 5 gal pails or 55 gal drums, product can be applied using spray-on, wipe-on, or rotary motion of mold.

Dampney Co., Inc.
Everett, MA 02149
Nov 14, 2006 Developed for waterside corrosion prevention for surface temperatures up to 700°F, Apexior® Coatings are available in VOC-compliant formulations. Single-component Apexior Number 1® consists of air dry coating that prevents pitting corrosion and scale deposits on metal surfaces immersed in hot water at temperatures above 200°F. Apexior® Number 3® protects metal surfaces that are frequently wet, exposed to high humidity, or immersed in water up to 140°F.

Cortec Corp.
St. Paul, MN 55110
Nov 07, 2006 Combining organic phosphorous compounds, polymers, and aromatic azoles, VpCI(TM)-647 protects ferrous and non-ferrous metals. Designed for open-loop cooling water systems, product forms thin inhibiting film on metal to prevent corrosion and pitting to parts in direct contact with solution. Then, vapor phase action protects parts that are not in direct contact with solution. Non-toxic, environmentally safe product does not contain molybdate, heavy metals, nitrites, or inorganic phosphates.

Dylon Industries, Inc.
Cleveland, OH 44144
Nov 01, 2006 Brushed, sprayed, or dipped on surfaces, Grade AA Ultra Graphite Coating is smooth and slippery when dried and has high electrical and thermal conductivity. It will not crack or melt and produces no odors, smoke, or pollution. Water-based product serves as release agent since most molten metals, quartz, glass, concrete, and ceramics will not stick to its surface. When no longer needed, coating may be removed with cold water.

Fosta-Tek Optics, Inc.
Leominster, MA 01453
Oct 20, 2006 Fosta Fog-Free(TM) performance coating for polycarbonate lens and eyewear applications utilizes flexible poly-hardcoat with permanent anti-fog and anti-static properties built in, and moisture on lens surface will sheet out and not affect scratch resistance. Properties are retained after repeated cleaning in soap and water. Coating supports Army's PEO Soldier for eyewear and goggles, and European Standard 166 for safety eyewear standards.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 16, 2006 Corr-Paint(TM) CP4000 protects steel components and structures in applications to 1,100°F. Applied using spray equipment, brush, or roller, ceramic silicone-based coating adheres to marginally prepared steel surfaces and is resistant to acids, bases, and solvents. Formulation also resists thermal shock, salt spray, and UV light. Able to dry at room temperature, this single-part, black-pigmented paint is water-dispersible and cures fully during operation at temperatures above 450°F.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 09, 2006 Aremco-Seal(TM) 617 is used to produce hermetic seals in porous ceramics and refractories in electrical and high-vacuum applications. Single-part, water-based glass coating, applied by dipping, brushing, or spraying, cleans up prior to curing with warm water. Curing is accomplished by setting at room temperature for 30 min and then heating to 1,600°F for 30 min. Odorless product contains no VOCs, and no outgassing will occur upon curing or during operation.

CI Displays
Holbrook, NY 11741
Oct 06, 2006 Designed to optimize LCD visual experience, UV Polymer Optical Bonding permanently affixes variety of substrates, including acrylic or glass, to LCD panels up to 46 in. Substrate thickness is typically 1-10 mm. Bonding options include antireflective- and antiglare-coated glass for sunlight readability, ITO glass to minimize EMI emissions, touch screens, and acrylic vandal shields. Process offers truly permanent, defect-free adhesion to LCD.

Huron Technologies, Inc.
Leslie, MI 49251
Oct 04, 2006 Formulated for use on sound-absorbing panels in automobile and truck interiors, Mold Release Coating 7305 helps reduces mold maintenance as well as resulting downtime. It can be used in any application using flexible polyurethane foam for parts, including seating, head rests, and arm rests. While tested and proven in automotive molding applications using flexible polyurethane foam, it has also been used in molded-in-skin applications.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 02, 2006 Designed for high performance bonding, sealing, and casting, Model EP21TDC-4HT epoxy compound resists vibration, impact, and shock, and can be room temperature or heat-cured. High physical strength properties include tensile strength of 8250 psi, tensile shear strength of more than 2800 psi, and peel strength exceeding 36 pli at 25°C. Featuring volume resistivity greater than 1014 ohm-cm, two-part epoxy bonds with metals, glass, ceramics, wood, vulcanized rubbers, and most plastics.

Master Bond, Inc.
Hackensack, NJ 07601
Sep 27, 2006 Medium-viscosity, 2-component EP30HT has 4:1 mix ratio by weight, is 100% reactive, and does not contain solvents or volatiles. It cures at room temperature or more rapidly at elevated temperatures. Serving as adhesive/sealant, coating, and casting compound, product adheres to metals, glass, ceramics, woods, vulcanized rubbers, and plastics. Optically clear formula has refractive index of 1.54 and spectral transmittance of 97%. It resists exposure to water, oil, and organic solvents.

Huron Technologies, Inc.
Leslie, MI 49251
Aug 30, 2006 Available in 5 gal pails and 55 gal drums, mold Release Coating 7137 is effective in applications that combine composite with fabric material in permanent structure. Low-maintenance product has water base, exhibits low build for cleaner molds, and handles up to 450°F mold temperature. It is effective for release of polyurea composites with fiberglass for automotive and truck interior components.

Dymax Corp.
Torrington, CT 06790
Aug 29, 2006 Available in gel, brush-on, or spray-on formulations, SpeedMask® UV Curable Masking Resin provides surface protection from contamination caused by acids, alkalines, plating solutions, and ambient debris from air plasma spray, HVOF, grinding, peening, and grit blasting. Single-component, temporary masking resin is solvent-free, non-flammable, urethane-based, and water-soluble, and easily peels, dissolves in water, or burns off once the surface treatment process is completed.

Goldschmidt Chemical Corp.
Hopewell, VA 23860
Aug 29, 2006 TEGO® Polish Additiv WE 50 is non-ionic, oil-in-water (O/W) emulsion system that combines concentrated, organo-modified, silicone-based emulsifier with natural avocado oil. It promotes gloss and color enhancement, water repellency, and long-term care for leather, wood, and plastic surfaces. In combination with thickening agents, product can also be used in polish creams for plastic surfaces. Highly concentrated O/W emulsion (50%) can be diluted with water.

Garon Products, Inc.
Wall, NJ 07719 1924
Aug 24, 2006 Providing gloss finish, Fast Cure(TM) Coating Systems set up in temperatures as low as 45°F in as little as 10-12 hr, and achieve full chemical resistance in as little as 3 days. Impact-resistant epoxy systems are low odor and VOC compliant in all 50 states, as well as OSHA compliant, USDA authorized, and EPA approved. Coatings are packaged in kits that include all components needed as well as detailed application instructions.

Cortec Corp.
St. Paul, MN 55110
Aug 23, 2006 Organic, water-based VpCI(TM)-386 provides UV-resistance and corrosion protection for equipment, structures, and maintenance needs. It is appropriate for direct metal applications and can be used as single coat system or in conjunction with other primers and topcoats. Suited for indoor or outdoor conditions, non-toxic, low VOC system forms thixotropic coating that is resistant to sagging or running, forming non-flammable protective barrier against corrosive elements.

Cortec Corp.
St. Paul, MN 55110
Aug 18, 2006 Utilizing soybean derivative methyl esters in conjunction with Vapor Phase Corrosion Inhibitor chemistry, EcoLine(TM) Long Term Rust Preventive provides up to 24 months of indoor protection and up to 6 months outdoor protection for multi-metal parts. Product cuts through surface contamination and other fluids, helping to loosen frozen and rusted areas. Compatible with environmental and user safety, natural smelling formula is VOC-free, non-flammable, and biodegradable.

Acheson Colloids Co.
Port Huron, MI 48060
Jul 27, 2006 Emralon® TM-008 waterborne fluoropolymer lubricant and anti-corrosion coating provides low coefficient of friction along with solvent resistance in permanent lubrication applications. Through consistent and uniform dip spin, spray, and electrostatic application performance, product allows for bulk coating of small parts requiring permanent lubrication. Use results in satin-like finish that imparts noise-suppression on fasteners and rubbing surfaces.

Dymax Corp.
Torrington, CT 06790
Jul 11, 2006 DYMAX 9008 chip encapsulant forms transparent layer that protects components and leads from moisture, dust, and other contaminants. Coating cures in 10-30 seconds under 200-1,200 mW/cm² intensity lights, enabling thicknesses to 1.5 mm to cure in UV conveyor belts at speeds of 2-4 ft/min. Cure depths to ¼ in. are possible. Coating adheres to variety of surfaces including glass-filled epoxy, metal and ceramic surfaces, as well as polyimide and other flex materials.

Victrex plc / Victrex USA Inc.
Greenville, SC 29615
Jun 27, 2006 Formulated with VICTREX® PEEK(TM) polymer, VICOTE(TM) Coatings exhibit scratch-, wear-, heat-, and chemical resistance and do not need primer during coating process. All materials are dishwasher safe and FDA-compliant. Coatings include 700 Series, comprised of powders for electrostatic coating, and 800 Series, which includes dispersions where thinner coatings are required or where difficult geometries must be coated. Pure VICTREX PEEK-based dispersion (VICOTE 804) is also available.