TENNANT
Minneapolis, MN 55426
Mar 16, 2007 Addressing needs within food and beverage plants, Eco-CWO minimizes odors and food borne illnesses caused by bacterial growth. One-coat, seamless coating provides resistance to thermal shock, chemicals, and slips. Water-borne urethane is virtually odor-free and contains no VOCs. Offering UV light resistance, Eco-URE epoxy coating can be used to prime, build, or topcoat flake or quartz flooring. It is suited for automotive showrooms, retail aisles and lobbies, and education classrooms.

Cortec Corp.
St. Paul, MN 55110
Feb 28, 2007 Designed for cooling towers or closed- and open-loop recirculating cooling systems, S-14 Bio protects carbon steel, galvanized steel, aluminum, copper, and other nonferrous metals from corrosion while also providing anti-scaling control. This 91% biobased, environmentally friendly additive has non-toxic, readily biodegradable formulation and incorporates Vapor phase Corrosion Inhibiting (VpCI(TM)) Technology. It is compatible with most water treatment programs.

Acheson Colloids Co.
Port Huron, MI 48060
Feb 28, 2007 Consisting of one-component, thermosetting graphite coating, Dag® EB-020A provides controlled electrical properties for alkaline battery applications. Water-based formula is particularly useful in solvent-prohibited areas. Coating adheres to smooth-surfaced, nickel-plated steel, maintaining conductive surface on current collectors. It also provides chemical resistance to KOH electrolyte, minimizing corrosion and oxidation.

Cortec Corp.
St. Paul, MN 55110
Feb 28, 2007 Developed for parts and equipment in power generation, aviation, chemical, refinery, and offshore drilling industries, Cortec® VpCI(TM)-371 protects against corrosive attack and metal fatigue brought on by extreme heat. Single-component, air cure coating offers aluminum appearance without any hard settling of aluminum. Its 9H pencil hardness helps resist abrasion from grit, sand, and rocks. Formulation also exhibits 1,000 hr salt spray resistance.

Valspar Corp., The
Wheeling, IL 60090
Feb 22, 2007 Combining chemical resistance and UV stability, CRU-340 features mixed VOC of less than 340 g/L, making it compliant in all OTC states. High-gloss formula provides UV light resistance as well as abrasion resistance, critical for high-traffic flooring. Available in clear or pigmented finish, coating is suited for new and existing concrete floors in industrial, aviation, institutional, and commercial operations. It allows for recoat in 12 hr and light foot traffic in 24 hr.

Deposition Sciences, Inc.
Santa Rosa, CA 95403
Feb 19, 2007 Suited for applications in general lighting, medical systems, digital imaging, LED lighting systems, and portable optical systems, HeatBuster® Spectral Metal Thin Film Coating meets severe abrasion, adhesion, humidity, and salt fog tests of Mil-C-675 standards. Stable over temperature and humidity changes, dichroic hybrid coating operates over range of angles, and is designed to be highly reflective over selected bands of wavelengths and minimally reflective over rest of the spectrum.

Master Bond, Inc.
Hackensack, NJ 07601
Feb 09, 2007 Suitable for use in both thick/thin sectioned configurations, EP21TDC-2LO bonding, sealing, coating, and encapsulation system has thermal conductivity of 9 BTU/in./ft²/hr/°F and volume resistivity of 1,012 Wcm. With service operating temperature range of 4 K to 250°F, room temperature curable product features Shore D hardness of 36, elongation of 50%, 1:3 mix ratio by weight or volume, working life of 90 min for 100 g mass, tensile strength of 1,070 psi, and T-peel strength of 15 pli.

NYLOK Corp.
Macomb, MI 48042 4007
Jan 30, 2007 Applied to threaded fasteners, NYCOTE® nonconductive WHITE® TEFLON® PFA powder coating provides complete thread masking and protection against contamination from electrodeposited paints and primers as well as adhesion of weld spatter. Product also adds lubricity to fasteners and reduces torque vs. tension scatter. While process eliminates need to manually apply and remove caps, tape, or plugs, there is also no need for slave bolts and retapping.

Birchwood Casey
Eden Prairie, MN 55344 2138
Jan 24, 2007 Designed for use on copper, brass, bronze, iron, and steel substrates, Antique Brown® M38 enables brush-on finishing of large surfaces or immersion finishing in batch quantities. When desired color tone is achieved, reaction is stopped by rinsing metal surface with water. Once dried, resulting finish can be highlighted or distressed, if desired, to produce oil-rubbed bronze finishes or rich leather-brown tones. Process is odorless and operates at room temperature.

Valspar Corp., The
Wheeling, IL 60090
Jan 23, 2007 Designed to promote Green building efforts, EC-17 Ultra UVR Epoxy coating complies with all US VOC regulations, including South Coast Air Quality Management District Rule 113. It can serve as stand-alone coating, clear or pigmented; system topcoat; quartz system grout coat; or binder in slurry system. Suited for industrial and decorative flooring applications, this water-clear, 100% solids epoxy coating exhibits UV stability, is chemically resistant, and adds high-gloss appearance.

Cortec Corp.
St. Paul, MN 55110
Jan 22, 2007 Made from soybeans, BioCorr(TM) provides up to 2 years of corrosion protection for metal products or parts during shipment and storage. Environmentally friendly product eliminates expense associated with disposal of petroleum-derived products and acts as replacement for hazardous mineral oils and flammable solvents. In addition to biostatic material that prevents mold growth, VOC-free product incorporates Vapor phase Corrosion Inhibiting (VpCI(TM)) technology to seal out air and moisture.

Chemline Inc.
St. Louis, MO 63103
Jan 18, 2007 Steelcote EPO-LUX 221SP imparts protection to and facilitates repainting of swimming pools. Suited for use on poured-in-place, aged concrete as well as fiberglass, this masonry coating requires no primer and has direct-to-concrete, high-build formula that can be sprayed, rolled, or brushed onto surface. Product is resistant to chlorine and other chemicals as well as moisture penetration. Available in various colors, coating exhibits gloss retention above waterline.

Rust-Oleum Corp.
Vernon Hills, IL 60061
Jan 16, 2007 With high-delivery valve, Industrial Choice® High Output Inverted Marking Paint produces 2-3 in. wide lines and resists early fading and chalking. Solvent-based formula can be applied in temperatures as low as 25°F and can penetrate and adhere to hot surfaces. Spray-through cap is guaranteed not to clog. Available in 16 oz cans, paint dries in less than 5 min, comes in variety of colors, and can be applied to concrete, asphalt, and brick, as well as dirt, gravel, and grass.

Valspar Corp., The
Wheeling, IL 60090
Dec 12, 2006 Able to be used in slope-to-drain areas as well as wet processing areas, Flowfresh® SR provides users with chemical-resistant, cementitious urethane floor resurfacer that offers thermal shock resistance. Impact- and abrasion-resistant solution also imparts slip resistance to help eliminate or reduce injuries. Natural antimicrobial agent, Polygiene®, inhibits growth of bacterial odors, guards against degradation from microorganisms, and prevents growth of harmful microbes.

Aremco Products, Inc.
Valley Cottage, NY 10989
Dec 11, 2006 Formulated using high-purity silver flake combined with conductive binder system, Pyro-Duct(TM) 597-C is electrically and thermally conductive, and can be used to produce electronic and high vacuum components. Coating exhibits volume resistivity of 0.0002 W-cm at room temperature. Designed to adhere to ceramic and glass substrates, single-component system dries at room temperature in ~1 hr and heat cures in 1-2 hr at 200°F.

Dow Corning Corp.
Midland, MI 48686 0994
Dec 08, 2006 Applied once, Sylgard® HVIC+ provides long-term water repellency/hydrophobicity to protect against power distribution interruptions due to increased leakage current, dryband arcing, and flashover from salt spray, industrial pollutants, and desert sand. One-part silicone high voltage insulator coating (HVIC), unaffected by salt air, rain, and humidity, exhibits tracking resistance and prevents contaminants on insulator surface from becoming wet and producing conductive layer.

Vitex Systems, Inc.
San Jose, CA 95134
Nov 28, 2006 Alternating deposit of polymer smoothing/planarizing layers and ceramic barrier layer to create Barix structure, Model G200E thin-film encapsulation system is used in production of OLEDs, photovoltaics, and thin-film batteries. It consists of oxide sputtering chamber and monomer deposition/UV cure chamber connected in linear fashion; substrate is transferred back and forth to produce multi-layer structure. Tool can be connected to glove box or cluster robot via standard interface.

Maintech
Hassocks, West Sussex, BN6 9WU   United Kingdom
Nov 27, 2006 Cross Check(TM) Tamper Proof Torque Mark provides visual method for identification of vibratory loosening or tampering of nuts, bolts, fasteners, and assemblies. Visible under ambient light and fluorescent under UV light, paint marks are easily broken if parts are tampered with or become loose. Paint adheres to metal and other substrates and is safe on most surfaces.

Aremco Products, Inc.
Valley Cottage, NY 10989
Nov 17, 2006 Silver-filled Pyro-Duct(TM) 597-C is used to produce electronic and high vacuum components for applications to 1,700°F. Single-component system exhibits volume resistivity of 0.0002 W-cm at room temperature and adheres to ceramic and glass substrates. Product dries at room temperature in 1 hr and heat cures in 1-2 hr at 200°F. Applications include sensors used in high vacuum systems, high temperature connectors and specialty lighting, and semiconductor components.

Huron Technologies, Inc.
Leslie, MI 49251
Nov 15, 2006 Providing clean mold due to less build-up on the mold surface, Mold Release Coating 7391 ensures smooth and defect-free part surface. Semi-permanent coating can be used for up to 30 production runs between applications and repeated without cleaning the mold each time. Available in 5 gal pails or 55 gal drums, product can be applied using spray-on, wipe-on, or rotary motion of mold.