Valspar Corp., The
Minneapolis, MN 55415
Jul 01, 2008 Flurospar® SR is used to coat aluminum windows, curtain walls, shutters, awnings, louvers, wall panels, and other building components. Spray-applied, factory cured coating is formulated with solar reflective pigments that keep building components cool. Available in white, black, green, blue, brown, and red, eco-friendly and mar-resistant coating minimizes need for touch-up/repainting. Pearlescent effects are also available in Flurospar SR Classic II formulation.

PPG TrueFinish® Industrial Coatings
Pittsburgh, PA 15272
Jun 12, 2008 Suitable for interior and limited exterior applications, Aquacron 833 can be field top coated with water reducible alkyd enamels or solvent-based enamels after thoroughly dried. Low-odor product contains no heavy metals, is VOC-compliant, and has less than 1 lb of organic HAPS/gal of solids. Applications include metal fabrication, structural steel, industrial machinery, cabinets, racking, and shelving.

PPG TrueFinish® Industrial Coatings
Pittsburgh, PA 15272
Jun 12, 2008 Water-reducible alkyd primer, Aquacron 835, is suited for industrial use on bare metal surfaces where corrosion resistance is needed. It can be top coated with water reducible alkyd enamels or solvent-based enamels in field after thoroughly dried and contains no heavy metals. Along with less than 1 lb of organic HAPS/gallon of solids, low-odor primer features 2.8 lb/gal VOC-compliant formulation compatible with tap water reduction.

PPG TrueFinish® Industrial Coatings
Pittsburgh, PA 15272
Jun 12, 2008 Formulated for accelerated drying times, Aquacron 880 Series interior/exterior enamel is intended for industrial use on bare or primed metal surfaces. Low-odor solution contains no heavy metals, comes in range of colors and gloss, and has no recoat window. Water can be used for reduction and clean-up, and product can be formulated to 2.8 VOC (less water) compliance.

PPG TrueFinish® Industrial Coatings
Pittsburgh, PA 15272
Jun 12, 2008 Applied directly to cleaned or blasted steel, Spectracron 380 promotes surface protection and color/gloss retention. This 2-component exterior-grade enamel has blended VOC of 3.5 lb/gal max and imparts resistance to chemicals, abrasion, and impact. There are no hazardous air pollutants or SARA 313 constituents, and various colors and glosses are available. Poly-Iothane HS can be applied directly to cleaned or blasted steel as well as over 2K epoxy or polyurethane primers.

PPG TrueFinish® Industrial Coatings
Pittsburgh, PA 15272
Jun 12, 2008 Promoting corrosion resistance over cleaned and treated steel, Spectracron 560 suits short wet-on-wet application windows when topcoated with Spectracron 2K polyurethane enamels; polyurethane topcoat can be applied directly over this primer 10-15 minutes after application. Formulated with VOC less than or equal to 3.5 lb/gal and less than 0.17 lb HAPS/gal, this 2-component, chrome-free primer adheres to cleaned G90 galvanized steel and aluminum as well as fiberglass substrates.

Epner Technology, Inc.
Greenpoint, NY 11222
Jun 05, 2008 NADCAP-certified electroless nickel plating meets MIL-C-26074D, ASTM B-656 and B-733, AMS 2404 and 2405, as well as aerospace contractor specs for corrosion resistance, hardness, and lubricity. With .001 in. thick deposit, it is available in high-phosphorous electroless nickel for dip brazed aluminum heat exchangers. Laser nickel, also available, offers .008 in. thick pit-free electroless deposit designed for optical polishing.

Bayer MaterialScience, LLC
Pittsburgh, PA 15205-9741
Jun 05, 2008 Optimized for low or near-zero VOC, polyaspartic coatings offer favorable characteristics for outdoor weathering, gloss retention, and corrosion resistance. Rate of reaction and cure can be controlled to formulate mixture with potlife from 5 min to 2 hr. Product can be used as topcoat due to non-yellowing nature, and blocking of UV light prevents undercoat discoloration. Finished topcoat will bend on metal substrate without damage.

Krylon Products Group
Cleveland, OH 44115
Jun 04, 2008 NSF-registered and P1-rated, Sprayon® Belt Dressing contains no asphalt or rosin, and will not glaze or collect dirt/dust. It is used to condition and increase pulling power of leather, rubber, canvas, fabric, flat round or V belts; auto fan belts; farm machinery belting; and all industrial belt drivers. Equipped with SPRAY ANYWAY(TM) valve, product can be applied directly to belts and sheaves of V belts while in use.

Deposition Sciences, Inc.
Santa Rosa, CA 95403
May 29, 2008 Designed to maximize curing wavelengths between 220-400 nm and minimize rest of visible and IR spectrum from 450-2200 nm, UV Spectral Metal features MicroDyn® sputtering technology and is used as reflector behind curing lamp. Stable over temperature/humidity changes, it is coated onto highly polished, standard size aluminum sheets. With ability to customize/fabricate products after coating, long trough reflectors for inline exposure systems can be created using multiple lengths of product.

Cortec Corp.
St. Paul, MN 55110
May 29, 2008 Designed to replace phosphatizing and chromating systems, VpCI(TM)-440 protects multi-metal substrates from corrosion while preparing metals for surface bonding and coating. Non-toxic, non-hazardous, water-based coating can be applied with conventional equipment such as sprayers, dipping tanks, steam cleaners, and power washers. Self-preserving product is environmentally safe and does not require use of biocides.

Bayer MaterialScience, LLC
Pittsburgh, PA 15205-9741
May 22, 2008 Polyurethane raw materials can be used to formulate self-healing coatings that are scratch- and chemical-resistant, fast-curing, and meet VOC regulations, such as high solids and waterborne coatings. Offering high reactivity and full crosslinking even at low-temperature curing, 2-component polyurethane coatings include hydrogen bonds that allow for thermoplastic flow to relieve stress and allow self-healing of defects.

Huron Technologies, Inc.
Leslie, MI 49251
May 16, 2008 Mold Release Coating 7575 maintains details in compression molding process using vinyl ester resins. Designed for molding products that must stand up to harsh, corrosive environments, coating can be used with chemical containers, ball and butterfly valves, wind turbine blades, pump housings, and functional building panels. It is available in 5 gal pails and 55 gal drums.

LINE-X Franchise Development Corporation
Santa Ana, CA 92707
May 16, 2008 LINE-X ReNew(TM) bedliner enhancement system is used to repair any brand of spray-on bedliner and upgrade it to quality of new LINE-X spray-on truck bedliner. It repairs gouges, brings back texture, and protects against UV damage as well as fading, moisture, corrosion, dust, scratches, and most chemicals. Formulated with KEVLAR®, it also features chemistry that permanently bonds to any polyurethane and polyurea coating.

Enviroline Group (IECC)
Pompano Beach, FL 33069
May 13, 2008 Two-component, high-gloss Envirothane® 550 is suited for industrial and commercial applications requiring color retention as well as UV, chemical, abrasion, and moisture resistance. Product is available in 22 standard colors, including 5 safety colors.

Steelcote Manufacturing. Co.
St. Louis, MO 63103 2990
May 07, 2008 Featuring water-thin viscosity, Floor-Nu® Penetrating Sealer penetrates as deep as ¼ in. into pores of concrete or masonry surfaces in order to protect against effects of moisture, freeze/thaw cycles, salts, oils, and specific chemicals. This 2-component (1A:1B) clear epoxy, which can also be used on insulation and wood or concrete floors, locks in loose aggregate on surface and forms hard, impenetrable sub-surface. Coating contains 48% solids by volume.

West Development Group
LaGrange, OH 44050
May 07, 2008 Designed for use on sprayed-in-place polyurethane foam, HSS 535 and HSS 540 R2R(TM) one-component coatings are tack-free within 1-2 hr and cure at normal temperatures in 2-6 hr by reacting with moisture in air, forming flexible moisture-free seal. Because coatings are solvent-free, they are environmentally friendly while providing same functionality as petroleum-based roofing materials. Both passed ASTM E108 flame spread test and obtained UL Class A fire rating.

Price-Driscoll Corp.
Waterford, CT 06385
May 01, 2008 Formulated with non-flammable solvent, Value Line series mold releases, mold cleaners, and rust preventives are EPA compliant and contain no Methylene Chloride. Mold releases types include silicones, paintable silicones, food/medical grade non-silicones, PTFE dry film, and Zinc Stearate dry powder. Gentle Clean Mold Cleaner is suitable for use on solvent-sensitive plastics and tooling, while Rust Armor rust inhibitor is suited for all metal molds tooling.

Valspar Corp., The
Wheeling, IL 60090
May 01, 2008 Developed for painting contractors, low VOC ZAP Interior/Exterior Latex Primer blocks typical household stains caused by wax crayons, pencil, pen, china markers, ketchup, mustard, and grease. ZAP Interior Oil-Based Primer blocks difficult-to-remove stains including those from smoke, fire, water damage, and tannin bleed, and seals in odors such as nicotine, fire/smoke damage, and pet odors. Both provide mildew resistant finish, require one-coat application, and typically dry in 1 hr.

Dampney Co., Inc.
Everett, MA 02149
Apr 30, 2008 Thurmalox® 8886 Series delivers long-term protection in weathering conditions and creates barrier against attack from glycol cooling agents and synthetic lubricants at temperatures up to 450°F. Available in clear, black, and custom OEM colors, these 2-component silicone copolymer coatings can be applied by conventional and airless, HVLP, HTE, or assisted airless spray equipment. Coatings adhere to clean, smooth steel, copper, and aluminum substrates.