NJM/CLI Packaging Systems Int'l.
Lebanon, NH 03766 1403
Jan 10, 2007 Featuring 2 front and 2 back label dispensers integrated on pressure sensitive labeler, Model 334 Charger handles 1-14 in. high, 5/8 to 6 7/8 in. dia round, oval, square, and rectangular containers. It can apply front, back, and wrap around labels as well as single- and multi-panel labels. Product features sanitary-style raised bed conveyor and stainless steel construction, and can be equipped to meet FDA 21 CFR Part 11 requirements.

Flexicon Corporation
Bethlehem, PA 18020 8006
Jan 10, 2007 Hydraulic Bulk Bag Conditioner loosens bulk solid material that solidifies during storage and shipment, facilitating subsequent material discharge. Available as stand-alone unit or integral component of bulk bag discharger, machine uses 2 hydraulic rams with contoured end plates to press opposing sides of bulk bags. Optional hydraulically actuated, variable-height turntable allows in-frame bag rotation and conditioning of bulk bags at varying heights.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jan 04, 2007 CMD cable and wire marker dispenser is portable, pocket-sized, and reusable, and packs into tool boxes or bags. Featuring loop for connection to lanyards, hooks, or tool belts, it includes 32 x 6.4 mm markers made from Dupont Tyvek® with oil-resistant acrylic adhesive backing. Dispensers are available with numeric markers from 0-9, and color-coded markers in white, yellow, green, blue, orange, red, violet, brown, black, and gray.

Lantech Inc.
Louisville, KY 40299-2316
Dec 20, 2006 Capable of cycling pallets in 18-22 sec, automatic and conveyorized RS-6000 employs 60 rpm, mechanically powered film delivery head that can wrap loads with 50 ga film, pre-stretched 250% or more, without film breaks. System features Ring-Straddle(TM) design and can handle 180-200 loads, measuring up to 50 x 50 x 80 in., per hour. Cut-and-clamp system uses heat-free film sealing system and has cut/clamp/seal cycle of 1.5 sec. Also included, Pallet-Grip® system locks load to pallet.

B+ EQUIPMENT
La Penne sur Huveaune 13821  France
Dec 19, 2006 Ultipack® packaging solution wedges corrugated blank over articles in box to protect them during shipment. Comprised of tray erector or case former, Ultipack® Wedging Machine, and Lidding Machine, automated packaging line can handle average of 10 boxes/min. It works for trays or RSC boxes and supports any box footprint or height. Tear tape or perforations on lid and wedge facilitate opening without need for cutter, suppressing risks to person and articles.

American Excelsior Co.
Arlington, TX 76011
Dec 14, 2006 Visco-elastic foam (memory foam) features porous cell structure that promotes airflow characteristics and reduces heat retention. Material is suited for applications requiring prolonged use, including mattresses, medical pads, and recreational and other specialty type cushions.

Sealed Air Corp.
Saddle Brook, NJ 07663-5291
Dec 11, 2006 Suited for high-volume packaging operations, Fill-Air® 2000 creates 8 in. bags at 100/min and 4 in. bags at 200/min. It accommodates material-roll widths of 8, 10, or 12 in., and with touch of button operators can adjust bag length to 4 or 8 in. Cushion sizes can be changed mid-production without changing film roll. Designed for on-line applications, system integrates into packaging line and includes auto-replenishment sensor to ensure inflated bags are readily available.

Innovative Picking Technologies, Inc.
Ixojnia, WI 53036
Dec 08, 2006 Designed to handle product sizes from 1.5 x 1 x .25 in. to 12 x 12 x 3 in., Pick-MAX Auto(TM) consists of multiple dispensers that hold vertical stack of product to dispense onto conveyor. System removes bottom item from vertical stack individually based on order requirements and offers stack heights to 6 ft. Adjustable dispense speed allows soft handling of delicate items. Each dispenser includes low level and out of stock sensors as well as replenishment indicator.

Standard-Knapp, Inc.
Portland, CT 06480
Dec 06, 2006 Providing smooth transition during product/tray merge, Continuum(TM) Integrated Tray/Shrink System features touch screen controls and push-button grouper changeover for ease of use. Customers can choose between freestanding or integrated shrink wrapper, and integrated tray stacker option. Device is suited for both loose containers and multipacks in materials such as glass, PET, HDPE, metal, and fiber cans. Zero-Gap in-feed technology offers balanced, jam-resistant packing lanes.

Automated Packaging Systems Inc.
Streetsboro, OH 44241
Nov 30, 2006 Conforming to MIL-DTL-117H as Type II, Class C, Styles 1 or 2 and MIL-PRF-121G, Type 1, opaque MLT1 and clear MLT2 heat-sealable, 9-layer, coextruded films have low moisture vapor transfer rate and oxygen transfer Rate. Both materials are 4 mil thick and support printing and imprinting directly on bag. They are available as Autobag bag-on-a-roll materials and feature sealant layer that facilitates sealing on Autobag packaging systems.

Douglas Machine, Inc.
Alexandria, MN 56308 3399
Nov 27, 2006 Invex(TM) incorporates flexibility of electronic motion controls in 12 case/tray per minute unit that provides smooth, quiet operation. Programmable motors are adaptable to run range of products and facilitate changeovers. OMAC Packaging Guidelines standards-based connectivity and IEC conforming software structure makes Invex PackML- and PackTags-ready. Along with software modularity, it offers recipe-driven, repetable changeovers.

Sealed Air Corp.
Saddle Brook, NJ 07663-5291
Nov 27, 2006 In addition to packaging products to be shipped, PriorityPak(TM) System scans bar codes, weighs item, and applies shipping labels. Smart-sensing technology scans item's dimensions to deliver correct amount of Cold Seal® cohesive-coated material from 2 supply rolls. Item is automatically weighed, postage is calculated, and before system forms package, it prints and applies shipping label to top web of material while in flat state, ensuring label will not fall off.

Sealed Air Corp.
Saddle Brook, NJ 07663-5291
Nov 24, 2006 Creating up to 40 sq-ft of material per minute, NewAir I.B.(TM) 600 automatically inflates and dispenses ¾ in. Barrier Bubble® cushioning material, which provides protection and maintains cushioning properties throughout shipping cycle. All-electric system measures 41½ x 36 x 72 in., and can be coupled with several options that fit into any packaging line, including Instasheeter(TM) conversion system and Roll Winder attachment.

Ampacet Corp.
Tarrytown, NY 10591-5130
Nov 20, 2006 Meeting food contact regulations, HYDROCLEAR 2 controls formation of water droplets in packaging using films made of oriented polypropylene and cast polypropylene. Cold fog testing on 30 µm multilayer extruded film containing 5% HYDROCLEAR 2 found that anti-fog agent prevents droplet formation within 15 min after package is placed in refrigerator at 4°C. Anti-fog agent also has hot-fog properties, preventing droplet formation in fresh-food packages containing hot food.

BIOCORP
Gerzat 63360  France
Nov 17, 2006 Useful in pharmaceutical laboratories, .5 or .8 in. plastic Lyoseal cap seals vial and its standard stopper in one step inside lyophilizer's sterile environment eliminates risk of microbiological contamination. Product enables sealing of all medicine vials in lyophilizer itself in (class A) aseptic area, eliminating crimping and re-handling operations. Stopper top remains sterile when end-user removes flip-off cap, and cap cannot be put back on once it has been removed.

Winepacks.com
Clinton, IA 52732
Nov 16, 2006 Suited for small wine businesses, Winepacks are made from 100% recyclable molded fiber and are available in 1, 2, 3, 4, 6, and 12 stackable bottle configurations. With universal part that serves as top, bottom, and middle insert for 6-bottle configurations, packaging is ISTA-3-A certified for use in UPS and FedEx shipping. One kit consists of 10 winepacks, 10 box inserts, and one shipping container. Winepacks have minimal warehousing requirements due to nesting ability.

NuSil Technology
Carpinteria, CA 93013
Nov 14, 2006 Low outgassing, one-part material EPM-2411-2 glop-top is designed for encapsulation of chip packages in devices where outgassing-related contamination poses problem. Product exhibits low stress and wide operating temperature ranges characteristically associated with silicone-based materials. It is stored and shipped frozen in 3 and 30 cc syringes as well as 3 and 6 oz tubes.

Sealed Air Corp., Packaging Products Div.
Saddle Brook, NJ 07663
Nov 09, 2006 Available in 2 models, FillTeck(TM) System enables operators to select length and height of cushioning material at touch of button. FillTeck(TM) 400 uses 16 in. wide film and produces cushioning material at 16 fpm, while FillTeck(TM) 600 uses 24 in. wide film and produces cushioning material at 12 fpm. Four film structures are available to meet requirements of different applications. Cushioning ranges in height from ½-4 in. and is perforated or cut to length operator selects.

Cortec Corp.
St. Paul, MN 55110
Nov 07, 2006 Polyester-based Eco-Corr® ESD is suitable for shrouds, sheeting, and bags used for storage or transit protection of electronics. While in use, film continuously emits protective vapor of VpCI corrosion inhibitors that actively saturate air, providing clean, multi-metal corrosion protection. In less than 0.2 sec, product dissipates static, preventing damage to electronics. Film biodegrades 100% into carbon dioxide and water within 6 months of commercial composting disposal.

Thomas & Betts Corp.
Memphis, TN 38125
Nov 02, 2006 Used with Steel City® round PVC floor or metal switch box, Steel City 68R covers conceal plugs and receptacles below floor level in concrete, wood sub-floor, and raised floor applications. Products accommodate one duplex or GFCI receptacle and up to 2 communications jacks. When not in use, rotating lid closes securely to fully protect power and communications receptacles from water and debris. To access receptacles, lid is opened and rotated to expose small opening for routing cords.