Hammerhead Industries
Ventura, CA 93003
Jun 27, 2008 Designed to both utilize and protect heavy tools, Gear Keeper Personal Heavy Tool Tether(TM) features ½ in. super coil and two 500 kg load-bearing carabiners. Unit is suitable for use in all kinds of weather and rough environments. Enclosed in nylon webbing for added strength, coil has retracted length of 21 in. and can extend up to 42 in. Low-profile coil system minimizes possibility of entanglement.

Precision Brand Products, Inc.
Downers Grove, IL 60515 4054
Jun 23, 2008 Usable in variety of shimming applications, Wedgies(TM) feature interlocking surfaces that allow them to be stacked so they can conform to irregular shapes and still maintain their lateral and vertical stability. Rigid polypropylene version is used to plumb or stabilize heavier objects while flexible vinyl version conforms to, protects, and cushions delicate underlying surfaces. Both styles are stable and will not shrink or swell with changes in moisture.

Capital Safety
Red Wing, MN 55066-5005
Jun 18, 2008 Designed to meet requirements of AS/NZS 1891:2007 standard, Delta(TM) Resist Harness and EZ Stop® Resist Shock Absorbing Lanyard feature extruded polyurethane coating that protects against grease, oil, paint, dirt, and grime. Webbing deflects debris, cleans up in seconds, and extends service life. Utilizing RFID, i-Safe(TM) intelligent safety system is built into every harness and lanyard to track inspections, control inventory, and manage information.

Hardinge Workholding Division
Elmira, NY 14902
Jun 18, 2008 Super-Precision® DD100/DD200/DD300 models incorporate frameless rare-earth permanent magnet torque motor, with no mechanical gearing, that wraps around spindle to eliminate need for separate motor extension. A ±.077 arc/sec resolution, ± 2.19 arc/sec accuracy encoder is mounted directly on spindle to provide accurate positioning. Direct-drive design eliminates backlash, enabling repeatability of ±2 arc/sec, and drawbar actuator lets products accept multiple workholding devices.

Atlona Technologies
San Jose, CA 95131
Jun 16, 2008 Including Models AT-VGA-SR, AT-COMP-SR, AT-COMPAD-SR, and AT-AV-SR, Powerless Analog Audio Video Wall Plate Cat-5 Extenders utilize Cat-5 cables to extend analog audio and video signals up to 300 m, and do not require any power source. Available in Component, Component with Digital Audio (S/PDIF), Composite with Analog Audio, Analog Audio, and VGA, wall plates facilitate A/V installations in commercial, industrial, and residential buildings.

Dymax Corp.
Torrington, CT 06790
Jun 13, 2008 Providing barrier to prevent absorption or penetration of air, dust, moisture, liquids, and gaseous substances, Ultra Light-Weld® GA-111 suits applications requiring low compression set, tack-free surface, and reliable sealing. UV/Visible light-curable form-in-place gasket can be dispensed into intricate and complex configurations with help of in-line curing. With viscosity that allows for varying bead heights, low out-gassing product cures completely in seconds.

Amphenol Corp., Amphenol Aerospace
Sidney, NY 13838
Jun 11, 2008 Offered in 4 sizes (3.6-10.3) and 7 ampacity options (70-350 A), RoHS-compliant SurLok provides secure connection that ensures voltage and amperage levels are maintained throughout duration of application. Pin head locks into place once mated to RADSOK connector, and plastic housing snaps over connector to act as protective cover. Any U-indent/clamshell or 4-indenter crimp tool can be used to perform crimp termination on wire.

Guden, H. A., Co., Inc.
Ronkonkoma, NY 11779
Jun 04, 2008 Suited for service in institutional, marine, and OEM applications, square aluminum butt hinges have non-removable stainless steel pin spun on both ends with no holes and no finish. Heavy-duty products, built to ANSI standards, can be designed using Guden standard templates or end-user-supplied specifications. They comply with RoHS regulations and can be used on doors, furniture, lockers, shipping cases, trunks, and more.

Arcos Industries, LLC
Mount Carmel, PA 17851
Jun 04, 2008 Designed for welding nickel-copper alloys (ASTM B127, B163, B164, and B165), Arcos 816 (ERNiCu-7) electrode can be used for welding in salt, seawater, and reducing acids environments. Dissimilar welding applications include joining nickel-copper and copper-nickel alloys to Nickel 200. Developed for GTAW/GMAW overlay of nickel-chromium alloy onto carbon and stainless steel and for cast repair, Arcos 72 (ERNiCr-4) offers resistance to high temperature and fuel-ash corrosion.

Miller Fall Protection
Franklin, PA 16323
May 29, 2008 Designed to meet OSHA, ANSI Z359-2007, and CSA Standards, Miller Revolution(TM) Harnesses and Miller® Shock-Absorbing Lanyards feature vinyl coating on webbing to protect against liquids that could compromise performance. Harnesses include rotary PivotLink(TM) connection, tongue buckle leg straps, 2 pull-free lanyard rings, and clip-on web finials. Rated to 310 lb, lanyards feature SofStop® shock absorber pack with woven inner core that expands up to 42 in. to safely reduce fall arrest forces.

Heyco Products
Toms River, NJ 08753
May 29, 2008 Available in sizes to handle .118-.500 in. mounting hole diameters, Rubber Push-In Bumpers can be used on panel thicknesses from .098-.188 in. and come in range of different shapes to suit varying application requirements. Products are constructed of black SBR and fit snugly into mounting holes so that air or water cannot pass through. Operating temperature range is -40 to +221°F, and additional applications include use as feet.

EXAIR Corporation
Cincinnati, OH 45249-1621
May 29, 2008 Side Mount Kits make mounting of a NEMA 12 Cabinet Cooler possible when electrical enclosure has limited space on top or side. Cabinet Cooler converts compressed air to 20°F without refrigerants or CFCs and circulates air through enclosure to eliminate high temperature malfunction. Cooling capacities up to 5,600 BTU/hr are available. Side Mount Kits maintain NEMA 12 rating of large and small electrical enclosures and models for use on NEMA 4 and 4X enclosures are also available.

3M Co., Electronic Products Div.
Austin, TX 78726
May 21, 2008 Featuring insulation displacement technology to eliminate cable stripping and tinning, Mini-Clamp II Connectors have integrated guiding and alignment feature built into cover, which provides positioning of individual wires. Polarizing tabs help provide proper mating, while latching features help provide secure connection. Connectors are available in 3- and 4-pin wiremount configurations, in 2 socket styles, and plug version, as well as boardmount socket configurations.

Walls & Forms Inc.
Dallas, TX 75374
May 14, 2008 Available in 3 standard sizes of 32 x 24, 24 x 24, and 24 x 8 in., Peg-Panel(TM) can be purchased in 100% molded plastic panel format for DIYers, or as finished peg-panel display. Unit features blank header for graphic placement and accepts all standard pegboard hardware. Measuring 1/8 in. thick, panel has ¼ in. diameter holes, 1 in. on center. Moisture-resistant board is virtually maintenance-free and will not chip, warp, break, rust, or absorb dirt or grease.

Tapeswitch Corp.
Farmingdale, NY 11735
May 14, 2008 Suited for use on AGVs, mobile platforms, traveling conveyors, and other moving equipment or machinery, VBL-250 Safety Bumpers activate from average of 4 lb with full collapse achieved as low as 34 N. Capable of up to 8 in. of collapse or crush distance, units are 2.5 in. wide and available lenghts from 4 in. to 16 ft. Polyurethane jacketed switch compartment protects switch from dirt and moisture. Winged version VBL-250-W provides full wrap around corner protection for vehicle.

Rogers Corporation
Rogers, CT 06263 0188
May 12, 2008 Based on open-cell urethane foam technology, E/bak(TM) cushion mounting materials are used to build thickness on cylinder as well as provide cushioning and absorb vibration in corrugated printing process. Allowing for printing on rough surfaces, they maintain high solid ink density for consistent print results over entire press run. Dark green foam with skin surface is available in 0.040, 0.060, and 0.080 in. thicknesses and is 60 in. wide.

Richco, Inc.
Morton Grove, IL 60680
May 09, 2008 Molded in UL94 V2 Nylon 6/6, RoHS-compliant TFR Series snaps in place to facilitate assembly. Once self-threading screw is installed, grommet expands and securely locks screw and assembled parts in place. Grommet legs are forced outward to help seal mounting hole and protect against dust and moisture. Mounting hole is square to prevent rotation.

Richco, Inc.
Morton Grove, IL 60680
May 09, 2008 LLF Series allows manual leveling by turning foot under weight of appliance, with maximum load per foot of 56.2 lb. Part is co-molded with 2 engineered thermoplastic materials: Polypropylene base for durable contact with floor and Thermoplastic Elastomer foot providing vibration control and noise isolation. It also includes RoHS-compliant 18-8/A2 SS hardware which meets/exceeds ASTM, DIN, and ANSI/ASME standards.

Stoody Co.
Chesterfield, MO 63017
May 06, 2008 Stocked in popular sizes, including 308L, 309L, and 316L, 300 Series Flux-Cored Arc Welding (FCAW) Gas Shielded Wire comes in flat and horizontal versions as well as all position welding grades. All feature environmentally friendly wire basket and random wound wire, which lends to optimized deposition rate with minimal labor.

Thomas & Betts Corp.
Memphis, TN 38125
Apr 30, 2008 Color-Keyed® Kube® Cross is suited for connections with electrical circuitry and uses standard installation tools for compression connections. Flexible, UL/CSA listed unit is designed for applications 600 V and below, but when appropriate insulation is used, product can be used in 35 kV or higher applications.