Power Drive Components, Inc.
Plainview, NY 11803
Jul 02, 2008 With Bello Superflex Ribbed Couplings, application engineers can select size where peak torque exceeds application torque X service factors. Units feature AL alloy 2011T3 and 303 stainless steel hubs and offer complete range of bores in clamp styles, suited for power transmission applications.

Omega Engineering, Inc.
Stamford, CT 06907
Jul 02, 2008 Including DRF-075M, DRF-094M, DRF-106M, DRF-131M, flange mountable DRF DIRECTCONNECT(TM) Series has one piece lightweight aircraft quality aluminum body; body and end plates are black anodized while steel parts are black oxide. Piston consists of Delrin® lightweight, low-friction, and wear-resistant thermoplastic and is supported with upper and lower sealed ball bearings rated at 5 million cycles. Actuators are suited for packaging, electrical assembly, and automotive industries.

Maxon Precision Motors
Fall River, MA 02720
Jul 01, 2008 Custom-made precision gearhead are designed for motors powerful enough for motion but offering too much speed and too little torque. Planetary and spur gearheads, available in 600+ variations with diameters from 6-81 mm, include planetary gearhead with 2 speeds on output side. Motor shaft goes through gearhead, resulting in 2 speeds with mechanically fixed reduction ratio. Worm gearheads and spindle drives are also available.

Haydon Switch & Instrument, Inc.
Waterbury, CT 06705 3910
Jul 01, 2008 Available in variety of resolutions ranging from 0.000125-0.002 in./step, Series 28000 (Size 11) double stack non captive hybrid linear actuator is suited for situations where lead screw is secured at both ends and motor translates along lead screw. Targeting applications that require precise positioning and rapid motion such as medical equipment, semiconductor handling, valve control, and telecommunications, it can also be customized to meet specific requirements.

BorgWarner
Auburn Hills, MI 48326
Jul 01, 2008 Built with materials and coatings for compressor wheels and housings that withstand temperatures generated by recirculated exhaust gas, turbocharger can withstand harsh environment created by low-pressure exhaust gas recirculation (EGR) systems to meet emissions standards. Specialized coatings also prevent uncombusted particles from depositing on compressor, extending lifetime of turbocharger.

Pacific Bearing Co.
Rockford, IL 61125
Jun 30, 2008 Providing smooth and quiet linear guidance, PL(TM), MT(TM), and MX(TM) series of linear actuators feature ball screw, lead screw, or belt drive options. PL series is mountable, MT series is available in different drive configurations (including vertical configuration) and different sizes, while MX series allows for high load capacity travel at high speeds. All 3 models work in multitude of environments, and carry t-slots which enable mounting.

Festo Corp.
Hauppauge, NY 11788
Jun 27, 2008 Featuring 1.5 m/s max speed and choice of 100, 200, 300 stroke lengths, EGSA ball screw-driven cantilever actuator is available as complete solution with motor and controller or as individual component adapted to third-party motors. Solution has 6 kg max working load and repetition accuracy of ±0.01 mm as well as choice of 50 and 60 mm drive width sizes. Suitable motor mounting kits for axial or reverse parallel motor configurations are available.

Steinmeyer Inc.
Bedford, MA 01730
Jun 25, 2008 Utilizing mechanical cross roller bearings for decoupling of ball screw drives, PMT 160 series stages achieve straightness and flatness runout of 50 nm or less. Decoupling system isolates any transverse movement of ball screw from linear bearing system and saddle of stage. Stages offer travel from 50-300 mm, with standard positioning accuracy of less than 10 µm and repeatability of ±0.5 µm when driven by dc servomotor or dc stepper motor.

KATAKA A/S
Copenhagen V DK-1718  Denmark
Jun 24, 2008 Based on segmented spindle technology, KATAKA actuator has maximum push/pull force of 200 and 100 kg, respectively. With 50 mm height and 400 mm stroke, compact actuator is suited for applications where linear motion is required from confined spaces or the force is needed perpendicular to elevated surface.

Quicksilver Controls
San Dimas, CA 91773
Jun 23, 2008 Designed to run on SilverNugget N3 servo motor controller/driver, Model QCI-A34M-1 features 400 oz-in. continuous torque, 450 oz-in. peak torque, 200 W continuous mechanical power, 100:1 inertial mismatch, 4,000 rpm, and 12-48 Vdc. Used for direct driving large flywheel loads, NEMA 34 IP50 rated motor suits applications such as winding, spooling, indexing, and tension control, in labeling, packaging, medical, automotive, and entertainment industries.

Misumi USA
Schaumburg, IL 60173
Jun 20, 2008 Offered in aluminum with black anodizing, brass, or 440C stainless with electroless nickel plating, XYZ-Axis Stages feature linear ball guide system that creates gothic arch groove ball guide on upper and lower side of stage body, optimizing rigidity. Units come in dovetail, linear ball, and crossed roller styles with rack and pinion, feed screw, or micrometer head feed mechanisms. Low-temp black chrome plating is available when low-light reflectivity or harsh environment operation is required.

Stafford Manufacturing Corporation
North Reading, MA 01864-0277
Jun 20, 2008 Made from steel, Remachineable Collars and Couplings feature pilot holes to let users remachine them to their own specifications. Collars can be rebored and threaded to match size of worn or replacement shafts, while couplings allow for mating of dissimilar sized shafts. Offered in 1 1/8-3 in. OD sizes, collars come in 1- and 2-piece clamp type styles. Couplings are available in 11 sizes with finished bore ends from ½-2 in. ID and pilot bores from 0.235-0.485 in. ID at other end.

WEG Electric Motors Corp.
Suwanee, GA 30024
Jun 20, 2008 With outputs from 20-200 hp, WMagnet Motor/Drive Packages offer efficiencies of 95-97%. Motors use rare earth permanent magnets in rotor to limit temperature rise during operation. Utilizing vector control technology algorithm, CFW-09 drive enables control without use of encoder/position sensor. As synchronous motor, WMagnet cannot be started directly from power supply because accurate synchronization of supply waveforms with rotor position is continuously required.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.
Charlotte, NC 28273
Jun 20, 2008 Designed to span long lengths without intermediate support, BKK and BKR Bridge Modules consist of extruded aluminum profile whose geometry has been optimized for high torsional stiffness. Two internal ball rail systems with 4 steel runner blocks are mounted inside extrusion at 90° angle to each other, maximizing load and moment capacity. Belt-driven BKR module comes in lengths up to 8,000 mm, while ball screw-driven BKK module is available up to 5,500 mm long.

Maxon Precision Motors
Fall River, MA 02720
Jun 20, 2008 Constructed with ironless rotor and 4-pole structure of Neodymium permanent magnets, mechanically commutated RE65 works detent-free and has minimal rotor inertia. Preloaded ball bearings support low-vibration and low-noise operation, and nominal voltage is in 18-70 V range. Depending on winding variation, 65 mm dia x 130 mm long cylindrical drive delivers nominal torque of 0.5-0.9 Nm at nominal speed of 2,400-3,700 rpm.

Physik Instrumente (PI)
Auburn, MA 01501
Jun 20, 2008 Compatible with various imaging acquisition packages, P-737 PIFOC® Piezo Z-Focusing Stage features up to 500 µm travel, nanometer precise motion under closed-loop control, and set of LabView drivers with analog control option. It allows for millisecond sample settling, enabling Z-stack imaging with multiple objectives. Designed for biotech research microscopes using deconvolution and 3D imaging, unit can be controlled through digital interfaces and analog signals via 0-10 V input.

Amacoil Inc.
Aston, PA 19014
Jun 18, 2008 Running on case hardened and ground shaft, Model RG80 features rolling ring linear motion engineering, enabling mechanical control over reversal and eliminating need for electronic controls and reversible motor. Linear pitch may be manually adjusted without gear reduction or adjusting drive motor speed. With travel direction and linear speed independent of drive motor, RG80 simplifies machine design. Applications include spraying, slitting, scanning, and winding.

B & R Industrial Automation Corp.
Roswell, GA 30076
Jun 18, 2008 Designed for X20 controller and I/O system, X20 stepper motor controller features 4 inputs for end switches/encoders, and automatic motor detection when booting and stall detection that identifies overload situations or any unwanted blocking of motor. Stepper motor connections can resolve each full step into up to 256 microsteps. Offering integration with Automation Studio and Soft CNC, unit is designed for bipolar 2-phase stepper motors, 1 A (24 V) or for 3 A (18-48 V) rated current.

ACT/Technico
Warminster, PA 18974-3531
Jun 16, 2008 Offering increased data transfer rates, SATA PMCDisk provides embedded system designers with flexible storage options. It comes with rotating or solid state flash SATA drives, and can be used on any CompactPCI, VMEbus, or VXS single board computer or carrier with standard PMC slot. Features include 2 universal I/O voltage keying holes for 3.3 and 5.0 V operations, 2.5 in. hard disk with storage sizes from 40-250 GB, and 2.5 in. flash drive that is available up to 128 GB.

Mariah Power
Reno, NV 89521
Jun 16, 2008 Connected to building power supply, Windspire® vertical axis wind turbine offsets electricity use and, at times, runs electricity meter backwards. Styling helps unit blend into surroundings, while technology maximizes energy conversion, regardless of wind speed. Integrated, plug 'n produce(TM) design includes generator, inverter, wireless performance monitor, and tilt-up monopole. Unit can produce about 2,000 kWh of electricity in 12 mph average winds.