Synopsys, Inc.
Mountain View, CA 94043 4033
Apr 21, 2008 Available in 45 nm process node, DesignWare USB 2.0 nanoPHY IP features built-in tuning circuits that enable post-silicon adjustments to account for unexpected chip/board parasitics or process variations without need to modify existing design. Unit is targeted for broad range of high-volume, mobile and consumer applications where key requirements include minimal area and low power consumption.

Silicon Image Inc.
Sunnyvale, CA 94085
Apr 17, 2008 Designed for integration into SoC semiconductors, 12 megapixel camera processor IP core delivers camera functionality for mobile phones, ultra mobile PCs, and security cameras. It can take still and moving pictures at rates to 30 fps. Along with JPEG encoding, image scaling, continuous digital zoom, and auto exposure, feature set includes support for autofocus, lens shade correction, chromatic aberration correction, bad pixel detection/correction, and image stabilization.

Kastalon, Inc.
Alsip, IL 60803 1810
Apr 16, 2008 Kastalon Mandrel Sleeves allow coil processor flexibility to unwind or rewind coils that are larger than maximum expansion of mandrel. Manufactured from Kastalon Polyurethane®, they are offered in slip-on or bolt-on versions with or without slot for tail gripper. Thin-walled sleeves prevent damage from coil creases, scratches, and marring; thick-walled units enable adjustments of ID size; and dual-durometer versions provide metal-like hard surface against mandrel with softer outer skin.

ETCO Incorporated
Warwick, RI 02888 1501
Apr 16, 2008 GM Spark Plug Boot is made of silicone, rated for 7 mm cable, and exactly matches original GM equipment. Suitable for all V/8's since 1997 and V/6's from 1998, it is supplied in standard black color, but can be molded in custom colors and in high temperature rated silicone for high performance applications.

Imaging Solutions Group of NY, Inc.
Fairport, NY 14450
Apr 16, 2008 Implemented as IP Core in Verilog, 1394b Link Layer can be ported to any FPGA or ASIC solution. Unit is fully compatible with IEEE-1394 IIDC DCAM specification. Available with full testbench, IP Core will accelerate applications such as storage systems, digital cameras, printers, and other computer peripherals.

Unger Enterprises Inc.
Bridgeport, CT 06610
Apr 11, 2008 Designed for pure water cleaning of out-of-reach areas, HiFlo Advance Telescopic Waterfed Pole features inner tube that allows direct connection to water supply. Solid flip-lock clamps allow for quick height adjustment to available max heights of 9, 17, 23, 27.5, and 33 ft. Available in fiberglass or fiberglass hybrid material, ergonomically designed tool is constructed to reduce heavy lifting and strains and comes with angle adapter and rectangular brush.

Optex, Inc.
Torrance, CA 90501
Apr 11, 2008 Designed for AX Series photoelectric beams, Models AX-1750 and AX-175W hide height, direction, and number of beams enclosed. Towers can be fitted with heaters/thermostats, and optional anti-climb tamper cap detects attempts by intruders. Featuring extruded aluminum frames, housings are suited for perimeter protection applications in airports, auto and RV lots, cell towers, correctional facilities, corporate campuses, military bases, ports facilities, and water treatment plants.

Nortech Laboratories, Inc.
Farmingdale, NY 11735
Apr 10, 2008 Intended for use with Therma-Kool® hot/cold gel therapy packs and InstaKool(TM) instant cold packs, disposable Blue Easy Sleeves(TM) act as protective barrier between skin and pack and will not interfere with healing process. Sleeves are non-woven, hand-stitched, and non-porous, helping to minimize chance of potentially spreading infectious skin viruses.

Diversified Heat Transfer, Inc.
Ridgewood, NY 11385
Apr 10, 2008 Coils are manufactured from tube materials consisting of copper, 90/10 cupronickel, SS, or carbon steel. Steam Coils have standard steam and steam distributing coils. Also available are industrial HVAC heating and cooling air-handling coils and plate fin, helical fin, L-footed, and solder-bonded air coils with 3/8-1 in. OD tubing for steam and water applications. Econo Line shell and tube heat exchangers, 4-30 in., are offered in steam-to-liquid or liquid-to-liquid styles.

Dortronics Systems, Inc.
Sag Harbor, NY 11963
Apr 09, 2008 Furnished with 9 in. tall ANSI strike plate that is compatible with most aluminum frame cutouts, 3300 Series electric strikes are suitable for wood and hollow metal door frames. They convert from fail-secure to fail-safe operation, and are built to hold tight with 2,000 lb pull test rating and stainless steel jaw and strike plate. Units feature in-line automatic power converter that accepts power from 12-24 Vdc, with output automatically adjusted to match strike input requirements.

Synopsys, Inc.
Mountain View, CA 94043 4033
Apr 07, 2008 DesignWare® LE IP for PCI Express (PCIe) is optimized for ASIC and FPGA designs that utilize single-lane (x1) PCI Express endpoint interface. During implementation, solution automatically optimizes parameters across PIPE interface and synthesizes complete PCIe interface. It includes reference design that helps designers integrate PCIe interface, while providing starting point for assembly and verification of chip design.

MIPS Technologies, Inc.
Mountain View, CA 94043-1353
Apr 04, 2008 Integrating up to 4 single- or multi-threaded processors, MIPS32® 1004K(TM) coherent processing system optimizes CPU performance on shared memory system. Unit enables multiple functions and applications to be implemented in single product, all running concurrently under symmetric multiprocessing-based operating systems. Since 1004K core is MIPS32-compliant, designers can leverage extensive base of existing software.

MathStar
Hillsboro, OR 97124
Apr 04, 2008 Second generation MPEG-2 Encoder IP core is designed for applications using field programmable object array (FPOA) chips. Product supports full 4:2:2 color space, 1,080i/720p resolution encoding, and optional MPEG-2, Part 1 compliant transport stream encoding for packet networks and broadcasting.

Regal Components, Inc.
Clearwater, FL 33762
Mar 27, 2008 Regal ESL H-13 Nitrided Ejector Sleeves, machined from H-13 hotwork die steel, are nitrided on ID and OD surfaces to Rc 65-74 for optimal wear resistance. Offered in 109 standard sizes with IDs from 3/32-¾ in. and lengths from 3-12 in. in 1 in. increments, sleeves can also be produced as specials down to 1/16 in. ID, with varying wall thick-nesses, ID/OD combinations, and lengths to 25 in. Custom front and EDM forms, head flats, vents, and other steels can be provided.

Metallized Carbon Corp.
Ossining, NY 10562
Mar 25, 2008 Consisting of carbon/graphite Antimony impregnated materials, Metcar grades M-343 and M-346 operate in difficult environments where oil and grease lubrication cannot be used due to temperature limitations. Products are designed for medium to high loads and are suited for bearings and thrust washers in both dry and submerged environments. Offering lubricating qualities and wear resistance, materials are completely homogenous and provide continuous lubrication.

Advanced Machine & Engineering Co.
Rockford, IL 61103
Mar 20, 2008 Developed to provide power-off clamping of rods and shafts, AMLOK® Hydraulic Series RCH Rod Clamps are actuated by spring/collet mechanism and unclamped by hydraulic pressure. With ability to lock reciprocating motions only, units are designed to clamp components after motion has stopped and to hold position securely as long as forces do not exceed table values. Clamps consist of alloy steel housing containing special locking mechanism actuated by set of disc springs.

Ruland Mfg. Co., Inc.
Marlborough, MA 01752
Mar 19, 2008 Featuring anti-corrosive properties, Carbon Steel Shaft Collars with zinc plating come in 1- and 2-piece clamp-style designs with bore sizes from 1/8-6 in. and 3-80 mm. High face-to-bore perpendicularity ensures that components are properly positioned and not tilted on shaft, and that there is even pressure on interfaced components. All yellow zinc parts are plated using RoHS-compliant trivalent process.

Kontron Embedded Computers GmbH
Eching D-85386  Germany
Mar 17, 2008 Featuring double-width design, Model OM6062 provides PCB and front panel space for complete CPU including graphics and HDD on single AdvancedMC. Backplane offers 2 x GbE lanes from MCH to 6 AMC slots allowing implementation of multiple processor AdvancedMCs or intelligent I/O cards, which communicate over Ethernet. If Ethernet switching is not needed, OM6062 operates without MCH. Basic configuration contains AC power supply unit, so no extra AC/DC converters are needed.

Stafford Manufacturing Corporation
North Reading, MA 01864-0277
Mar 13, 2008 Steel shaft collars are machined from AISI 1018 steel and allow users to create custom components including lever arms and adjustable sprocket mounts. Collars are suitable for custom fabricating in mechanical and structural components such as brackets and supports. Available in standard 1 and 2 piece styles as well as sizes ranging from ¼ to 6 in. I.D. Optional customization can be supplied up to 16 in. I.D.

Ruland Manufacturing Co., Inc.
Marlborogh, MA 01752
Mar 13, 2008 Available in 1- and 2-piece clamp-style designs with bore sizes from 1/8 to 6 in. in inch series and 3-80 mm in metric series, lead-free shaft collars are offered in variety of materials including type 303 stainless steel, type 316 stainless steel, aluminum, black oxide carbon steel, and engineered plastic. Clamp-style collars do not mar the shaft and provide high holding power. Face to bore relationship ensures that components are properly positioned and not tilted on shaft.