Advansus
Taipei 114   Taiwan
Jan 07, 2008 Measuring 170 x 155 x 42 mm, NTC100-LX800 accommodates 1 AMD Geode LX800 at 0.9 W Nano-ITX motherboard capable of running high-quality multimedia streams up to 500 MHz clock rate. System includes ultra low power AMD LX800 processor and CS5536 Companion Chip which dissipate total of 2.5 W TDP. It also features 12 Vdc adapter and 2 USB ports as well as 2 LED indicators for power and HDD status on front panel. Optional antenna via Mini-PCI slot is available.

RF Engines
Newport, Isle of Wight PO30 5WB  United Kingdom
Dec 31, 2007 Vector Rotation/Translation IP core product offers CORDIC (COordinate Rotation DIgital Computer) design that addresses CORDIC use of FPGA logic resources. It provides vector rotation for polar-to-rectangular coordinate transformation and vice versa, using technique that allows single FPGA to be used. Operating on input width of 20 bits, magnitude width of 20 bits, and phase width of 12 bits, RFEL CORDIC utilizes 3 x 36 BRAMS, 2 DSP48's, and 274 slices.

Stafford Manufacturing Corporation
North Reading, MA 01864-0277
Dec 28, 2007 Available in prototype to production quantities, Stafford Special Shaft Collars are custom-engineered from variety of available metals and plastics and can feature tolerances to 0.0005 in. if required. Products are offered in 1/8-16 in. IDs with hex, square, metric, radiused, keyed, and threaded bores. Available with 1- or 2-piece clamp types and set-screws, collars incorporate snap- and O-ring grooves, magnetic inserts and hinges, drilled and tapped face holes, and milled ODs.

Xilinx, Inc.
San Jose, CA 95124 3400
Dec 28, 2007 Implemented using Xilinx® Virtex(TM) or Spartan(TM) FPGA, carrier-class solution is delivered as 2 IP cores (NGNTime and FemtoTime) that are fully interoperable with NTP and provide migration path for Version 2 of IEEE 1588 or PTP. This provides designers of next-generation wired/wireless communication networks with embedded programmable timing solution that supports field upgradeability and customization. Solution provides accurate, end-to-end timing across entire network.

Stafford Manufacturing Corporation
North Reading, MA 01864-0277
Dec 24, 2007 Available in red, blue, gold, silver, bronze, and other colors, Aluminum Shaft Collars are available in 1- and 2-piece clamp styles in sizes from 1/8 to 6 in. ID with smooth, threaded, and special bore configurations. Lightweight and corrosion-resistant units and can be modified with various face and OD treatments including tapped holes, flats, and knurls. Shaft collars are suited for exercise equipment, store fixtures, displays, and other color-coded applications.

Xilinx, Inc.
San Jose, CA 95124 3400
Dec 14, 2007 Featuring ML550 hardware verification board, SPI-4.2 LogiCORE(TM) IP, and SFI-4.1 reference design, Virtex(TM)-5 LXT FPGAs-based solution aids development/evaluation of wired networking systems that require OC-192 (10 Gbps), multiple OC-48 (2.5 Gbps), or 10 Gbps Ethernet interfaces. ChipSync(TM) technology provides accurate dynamic alignment of clock and data using 75 ps programmable delays, while LogiCORE(TM) IP interconnects physical layer ASSPs to link layer FPGA devices.

Alcoa Closure Systems
Indianapolis, IN 46241
Dec 13, 2007 Added to product packaging, Fresh-Lock® Color Reveal(TM) Zippers provide distinct closure confirmation via change in color indicator. Zippers are available in custom styles and colors to enhance brand packaging and differentiate products. While providing double security sealing to keep products fresh, zippers also serve to facilitate opening and closing of packages.

Supermicro Computer, Inc.
San Jose, CA 95131
Dec 11, 2007 Operating at less than 35 dBA, chassis feature 200 W power supply with thermal fan speed control. Both SC502 and SC503 measure 9.8 in. deep and support processors up to 35 W using active heat sinks. They also support one 3.5 in. HDD or up to two 2.5 in. HDDs or one full-height PCI add-on card. At 11.3 in. deep, SC510 supports Intel Core 2 Duo and Xeon 3000 series processors up to 65 W using passive heat sinks. It offers optional support for up to four 2.5 in. HDDs.

Advanced Manipulator Specialists Inc.
Hoffman, MN 56339
Dec 05, 2007 Designed to help decrease operator fatigue and maintain product integrity, UltMate Torque Arm and UltiMate Torque Tube offer smooth movement that minimizes resistance to operator. Articulated joints and rotational pivots on Spring Controlled Torque Arms, Pneumatic Balancers, Linear Rail Torque Arms, and Torque Tubes accommodate various applications. Standard line facilitates torque capacities from 4-500 lb-ft and accommodates tool weight to 250 lb.

Stafford Manufacturing Corporation
North Reading, MA 01864-0277
Dec 03, 2007 Stafford Universal Mounting Collars have flat surface with countersunk, tapped hole on bore that lets it be mounted to flat surface or onto rail or shaft, and then allows another device to be attached to it. Featuring smooth, hex, square, threaded, or keyed bores, collars eliminate need for drilling holes or welding and can be repositioned. They are manufactured with steel, SS, or aluminum and can be supplied in standard inch or pipe sizes from 1/8-10 in. ID.

James C. White Co., Inc.
Greenville, SC 29606
Nov 27, 2007 Available in 2, 4, and 6 in. channel widths and 2 in. flange height, CABLE-RACE(TM) Double Adjustable Bend Channel Fitting comes in aluminum, hot-dip galvanized steel, and stainless steel. Each section of bend is cut and formed from single piece of metal, then bolted together, eliminating welds or rough spots. Both joints have 0-90° range of motion allowing exact adjustment to angle and offset needed. Once adjustment is made, fitting locks solid to support overall structure.

Elma Electronic Inc.
Fremont, CA 94538
Nov 16, 2007 Designed to ARINC 404A, Air Transport Rack Chassis can fit up to 10 6U x 160 mm slots in 1 ATR Short size. Unit accepts conduction-cooled modules in various architectures such as VME/64x, cPCI, and VXS. Independent dual liquid-cooled sidewalls dissipate in excess of 100 W/slot, and can use glycol, kerosene, PAO, and salt water. Powered via 28 Vdc/270 V or optionally 1 and 3-phase 115 Vac at 400 Hz, chassis can take up to 1 kW of input power.

CyberResearch, Inc.
Branford, CT 06405 2932
Nov 09, 2007 Steel RDV chassis has lockable aluminum front door that, when open, delivers full access to 4 rubber pad-mounted drive bays, OSD controls, and power/reset switches. When closed, door allows full view of display, power LED, and HDD activity LED. With 0.213 mm pixel pitch, intelligent 350 nit 8.4 in. active-matrix LCD delivers optimal image clarity and can simulate resolutions up to 1,024 x 768. Lockout switch for keyboard only allows authorized personnel to enter commands/data.

RTS, Inc.
Deer Park, NY 11729
Nov 09, 2007 Fabricated of double-laminated PVC, Flexible Waterproof Housings are designed to protect cameras to depths up to 33 ft, allowing videographers to make professional videos while diving or snorkeling. Integrated, optically neutral flat glass port fits in front of HD camera lens to preserve sharpness and avoid distortion. Non-corrosive and seawater-resistant clamping rail fits together and is tightened by 3 screw-knobs for waterproof seal. Sealants are not required.

Stafford Manufacturing Corporation
North Reading, MA 01864-0277
Nov 08, 2007 Machined from aluminum, steel, and stainless steel, Pipe Mounting Collars enable rigid mounting of tubing and pipe. Included PTFE bushings compensate for thermal expansion and variations in pipe size while also serving to reduce vibration and noise. Permitting flexible mounting configurations, these 2-piece collars have flats on both outside surfaces, are drilled and tapped for stacking to each other, and have countersunk hole for mounting to any surface.

Geotest - Marvin Test Systems, Inc.
Irvine, CA 92614-5846
Nov 08, 2007 Equipped with MAC Panel SCOUT receivers for connection of test system resources, 20-slot 3U Model GX73x2-MP and 20-slot 6U Model GX702A-MP can each accommodate up to 19 instruments as well as embedded PXI controller or PXI bus expander interface. Both utilize Smart features, which support monitoring of slot temperatures and system power supply voltages, and provide ability to program or map each PXI trigger line from one PCI segment to another.

Pepperl+Fuchs
Twinsburg, OH 44087
Nov 07, 2007 AS-Interface Flat-to-M12 adapter cables facilitate connection of I/O devices such as intelligent sensors, emergency stop switches, and modules to AS-Interface. Products also aid connection of junction boxes and panels to trunk line as well as power supplies and AS-Interface scanners to bus. These M12 adapters are available in straight or 90º M12 head angles with single or dual flat cable configurations in lengths of 0.3, 1, 2, or 5 m.

Stafford Manufacturing Corporation
North Reading, MA 01864-0277
Nov 06, 2007 Stafford Accu-Mount(TM) Collars are suited for securing gears, pulleys, and sprockets onto shaft, and permit adjustability. Split design features 1 solid, square, and flat side, with 4 mounting holes for attaching components, and second side that clamps securely to shaft. Providing centering hub and rigid mounting method for various drive components, collars have smooth bore to protect shafts. Machined from steel, they prevent slippage and vibration while allowing for repositioning.

North Safety Products, Inc.
Cranston, RI 02920
Nov 02, 2007 NorthFlex(TM) NFDS16 C5 Sleeve is comfortably form-fitting to keep out of the way and tear resistant to reduce snag hazards. Finely knit Dyneema/fiber glass blend is not bulky and vents heat to remain cool. Cut level 5 Dyneema® sleeve is launderable and can be dry-cleaned. Its gray color hides dirt.

E-Core Store
Hartsville, SC 29550
Nov 02, 2007 Suited for single-use medical kits used by healthcare facilities, Complete Release(TM) tape core eliminates wasted tape, minimizes dust contamination, and optimizes graphic and branding capabilities. Surface wrap helps tape stick securely to core during winding and releases completely at end of roll without contaminating tape. Core may be printed on both interior and exterior.