RNR Plastics, Inc.
Raynham, MA 02767
Mar 12, 2008 RNR EnviroVinyl(TM) Pockets are manufactured from materials that are low in heavy metal content, phthalate-free, and recyclable. They can be manufactured from 6-30 ga clear or colored PVC in 2 in. squares in sizes up to 24 x 36 in. Able to be die-cut, punched, and include windows and printing or embossing, products can incorporate specialty adhesives, grommets, and encapsulated rare-earth magnets.

Tundra Semiconductor Corp.
Kanata, ON K2K2M5  Canada
Mar 07, 2008 Synthesizable into any ASIC (Application Specific Integrated Circuit) technology/design, Interlaken IP Core is suited for multiple generations of future network switches, routers, and storage equipment. It delivers full scalability, achieved through 3.125-6.375 Gbps SERDES (serializer/deserializer) speeds and 1-24 SERDES lanes. Interlaken is ultra-scalable chip-to-chip IP written as open specification by Cortina Systems and Cisco Systems.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
Mar 05, 2008 Used with pneumatic or electric inline drivers, Torque Arm limits operator influence on assembly process and helps absorb torque to minimize potential for operator injury to arm, wrist, or hand. Offering max reach of 30 in., arm accommodates tool weights up to 10 lb and max torques up to 100 lbf-in.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Feb 29, 2008 Designed for use with coolers, refrigerated dryers, separators, filters, and liquid separators, Model AMD 1550 removes condensate and contaminants from air system. It features working pressures to 230 psi and discharge capacity of 53 gal/hr, and maintains liquid seal. Light-weight and modular unit comes in rugged and corrosion-resistant metal housing.

Kontron America
Poway, CA 92064
Feb 26, 2008 Intended for telecom equipment manufacturers, Kontron OM5080 is 2U off-the-shelf platform that uses AMC carriers with integrated switches to provide Ethernet connectivity for 1 or 10 GbE fabric in combination with 2 uplink modules on front. Unit contains dual power distribution, dual fans, redundant system management, and systems alarms. It comes with 2 Kontron AM4010 processor AMCs, each one featuring Intel® Core(TM) 2 Duo processor with dedicated memory and with Linux OS installed.

Elma Electronic Inc.
Fremont, CA 94538
Feb 22, 2008 Engineered for test/debugging, E-Frame Open Access Test Chassis does not have side or back walls around card cage area, leaving it open for easy access. It is designed with high power and cooling requirements for VPX (VITA 46/48) systems. With rugged modular aluminum construction, E-frame tower can support up to 21 or 17 slots at .8 and 1 in. pitch, respectively. Unit also features rear A/C PEM (Power Entry Module) with fuses, GND Stud, and front located ESD jacks.

Supermicro Computer, Inc.
San Jose, CA 95131
Feb 21, 2008 Series SC113, SC213, and SC216 support 8, 16, or 24 hot-swappable 2.5 in. SAS/SATA HDDs, repectively. Along with choice of 700 W or redundant 650 W power supplies, 1U SC113TQ series features Universal I/O (UIO) options that support up to 3 add-on cards. Both 2U SC213 and SC216 series come in low-profile versions that support up to 7 low-profile add-on cards and UIO versions that support 4 full-height and 3 low-profile add-on cards. Each features redundant 900 W power supplies.

Canfield Connector
Youngstown, OH 44514
Feb 14, 2008 Available in fixed or adjustable versions, Series D5400 Micro Solenoid Driver (MSD) connector promotes performance while minimizing heat buildup in solenoid valve operators. Solution induces accelerated solenoid pull-in with high input voltage and automatically reduces voltage during hold-in. This increases efficiency while extending solenoid life and conserving energy. Solution also enables coils to be energized for extended period of time without burnout.

Synopsys, Inc.
Mountain View, CA 94043 4033
Feb 11, 2008 Implementing multiple power domains, DesignWare USB Link Power Management IP allows nearly entire core to be completely turned off while idle, maximizing battery life. Eliminating USB cables and connectors, DesignWare High-Speed Inter-Chip IP simplifies connection down to 2 wires for high-speed chip-to-chip communication operating up to 480 Mbps. Unit consists of high-speed digital and analog blocks, PLL, and I/O pads, which are delivered as GDSII.

Stafford Mfg. Corp.
Wilmington, MA 01887
Feb 06, 2008 Offering alternative to 316 SS, Brass Shaft Collars feature 1- and 2-piece fully split designs that are available in ¼-6 in. sizes. Units can be modified to meet design requirements with features such as keyed, threaded, squared, and hex bores; flats; knurls; grooves; and drilled and tapped holes for component mounting. Suitable for OEM and end-user applications, collars are fully compatible with systems using brass components.

EFD Inc.
East Providence, RI 02914-1342
Feb 06, 2008 Designed for use with air-powered dispensing equipment, 27 gauge tapered dispensing tip makes it possible to apply accurate amounts of silicones, epoxies, lubricants, and other thick assembly fluids. Silicone-free solution is molded from clear polyethylene, which will not scratch delicate surfaces, and has tapered design that promotes flow. SafetyLok(TM) threads provide safe, secure attachment, while tip produces consistent dots and lines as small 0.008 in. wide.

NIBCO, Inc.
Elkhart, IN 46516
Jan 31, 2008 Featuring 360/90° swivel properties, TOLCO® Figure 75 can be used to hang rods on pitched roof, as upper attachment for fire protection branch line restraint, or as seismic attachment for hanger rods. Made of steel with electro-galvanized finish, unit meets UL Listing for 3/8 in. rod, to support up to 4 in. pipe.

Supermicro Computer, Inc.
San Jose, CA 95131
Jan 28, 2008 Cascading up to 240 physical devices, 3U SC936 Series supports 16 hot-swap, 3.5 in. SAS/SATA drives and features high-efficiency (88%), 900 W redundant (1+1) power supplies as well as 100% redundant cooling. Scalable solutions hold up to 224 hot-swap 3.5 in. HDDs per 42U rack, providing up to 224 Tb SATA storage or 89.6 Tb SAS storage. Along with up to 7 full-height, full-length expansion cards, chassis incorporate vibration dampening design and support UP/DP serverboards.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Jan 28, 2008 Comprised of multiple mold slide elements, modular Z1800 system offers variable solutions with compact mounting arrangement for mold designers and makers. Elements offer controlled slide functions directly from mold movement, without any excessive structural modifications. Range consists of basic T-slot guided slide elements that can be interchanged at head should contour need to be adjusted or modified. Products also accommodate small-stroke applications.

Elma Electronic Inc.
Fremont, CA 94538
Jan 24, 2008 Incorporating 10 midsize, single-width modules in compact 1U height, 19 in. rackmount MicroBox includes 6 AMCs, power module, J-TAG switch module, and 1 MicroTCA carrier hub. Cooling is achieved in dual redundant push/pull configuration, dissipating 35 W/module, and has 8 fans providing 20 cfm each at 1.5 in. water. It also features individual channel control, monitoring, and shutdown for each AMC. Hot-swap pluggable fan trays and filters are separately removable and managed.

Rex-Cut Products, Inc.
Fall River, MA 02720
Jan 22, 2008 Rex-Cut® Cotton Fiber Quick Change Discs feature multiple layers of non-woven cotton fiber that are combined with abrasive grains and then pressed and bonded into flexible discs, exposing new abrasives as they work. Able to blend and finish corners using their face and edge, they are suited for SS, aluminum, and exotics. Discs are available with Roloc® and Sockatt® style fasteners in 1, 1½, 2, and 3 in. sizes in various grits and bonds.

SKF Motion Technologies
Bethlehem, PA 18017
Jan 21, 2008 Featuring unlimited stroke, SKF® profile rail guides are available with different carriage designs to accommodate particular load and stiffness demands. Profile rail guides are designed with 4 precision-ground raceways and one slide unit with 4 ball circulation paths. Square configuration of raceways results in guidance system rigid enough to accommodate equal load capacity in all directions. Miniature guides incorporate 2-point contact of rolling elements with raceways.

Mentor Graphics Corp.
San Jose, CA 95131
Jan 14, 2008 MSATA PHY S130A IP core is designed for Semiconductor Manufacturing International's 130 nm Generic process. With integrated Serial ATA controllers, PHY IP core targets both host and device applications running at either 1.5 or 3.0 Gbps. It features analog circuitry residing in I/O ring, less than 3 mm² footprint, and low power optimization with less than 75 mW per lane including termination power.

Digi International
Minnetonka, MN 55343
Jan 09, 2008 Utilizing Dynamic C v10.21 with Megabyte Code Support, RabbitCore RCM4300 Series enables designers to use over 1 Mbyte of SRAM for shared code and data. Users can also implement up to 1 GB of storage using miniSD(TM) memory card. Providing essentials needed to design microprocessor-based embedded system with mass storage, RCM4300 development kit is available and includes 512 MB miniSD card, prototyping board, accessories, and development tools.

Rabbit Semiconductor
Davis, CA 95616
Jan 08, 2008 Providing on-board mass storage for data intensive applications, RCM4300 series provides capability to implement up to 1 GB of storage using miniSD(TM) memory card. It enables complex embedded applications such as data encryption and security-enabled web servers. Module is also available as development kit with 512 MB card, prototyping board, and Dynamic C v10.21 with Megabyte Code Support(TM), enabling designers to use over 1 MB of SRAM for shared code and data.