Taiyo Yuden (USA), Inc.
Schaumburg, IL 60173
Oct 10, 2008 Supplied in EIA 0201 case size (0.6 x 0.3 x 0.3 mm), BKP0603 series multilayer ferrite chip beads are designed for reducing power circuit noise in portable, battery-powered electronic equipment. Models BKP0603 HS220 and BKP0603 HS330, respectively, offer electrical performance characteristics that include 22 and 33 ohm impedance @ 100 MHz as well as 0.065 and 0.070 ohm RDC values. Maximum rated current for both models is 1.0 A.

Neenah Paper
Stevens Point, WI 54481
Oct 10, 2008 Available in 4 weights, CLEARFOLD® Translucent Paper is manufactured to be completely free of chlorine and acid. On-machine transparentizing process used for this product promotes offset printing and foldability characteristics. Recyclable solution, suited for envelopes and other folding applications, is also recommended for cover wraps, belly bands, fly sheets, direct mail, envelopes, greeting cards, announcements, and invitations.

3M Company / Bonding Systems Division
St. Paul, MN 55144
Oct 10, 2008 Typically installed within B or C annuli of subsea wells, CFW+ (Crushable Foam Wrap) acts as mechanical fuse and collapses at pre-determined pressure and temperature (110ºC) envelope. This allows expansion of annulus fluids as well as dissipation of any potentially hazardous increase in pressure. By incorporating Glass Bubbles, solution helps mitigate subsea well casing failure due to annular pressure build-up or trapped annular pressure.

Pulltarps Mfg.
El Cajon, CA 92020
Oct 09, 2008 Made of extruded aluminum, Pulltarps Universal Pull Bar can accept arm tarp with conventional pocket at back or tarp that uses hem tube. It features groove for hem tube that prevents tarp from bunching at corners, while adding strength to pull bar. Product is offered with urethane bumpers that slide on to pull bar to keep tarp centered and provide better coverage of load.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Oct 09, 2008 Models Select 410 and Select 410NiMo flux cored, martensitic stainless steel electrodes are available in 0.045-3/32 in. dia. Suited for welding straight 410 stainless steel, Select 410 contains 12% chromium and features oxidation resistance up to 1,200°F. Composed of 12% chromium, 4.5% nickel, and 0.65% molybdenum with maximum carbon content of 0.06%, Select 410NiMo is used to weld ASTM CA6NM castings and certain 410 alloys for blades and vanes in power generation equipment.

CertainTeed Corp.
Valley Forge, PA 19482-0860
Oct 08, 2008 ProRoc® Moisture and Mold Resistant Setting Compound is formulated for use in all stages of finishing, including filling joints, embedding fiberglass mesh joint tape, and concealing joints, fasteners, and trim accessories. Plaster-based product can be sanded when dry and is mold-resistant. Mold-X10 Mold Resistant Mesh Tape is fiberglass mesh that is self-adhesive. Complimenting ProRoc® Gypsum Board, both create finishing system for interior walls in residential/commercial applications.

BASF Catalysts LLC
Seneca, SC 29678
Oct 08, 2008 NanoSelect LF 100 and NanoSelect LF 200 for hydrogenation are intended for use in fine chemical and pharmaceutical applications. Lead-free catalysts are characterized by supported well-defined, unimodal nano-sized palladium clusters and are considered environmentally friendly.

M-Real USA Corp.
Norwalk, CT 06851
Oct 08, 2008 Suited for glass or PET bottles that could be returned for recycling, Simcastor Label WS supercalendered label and Simcastor Label WSE linen embossed label offer full wet-strength in manufacturing process and chiller cabinets in wholesale and retail environments. They come in basis weights of 70, 75, and 80 g/m² and are suitable for printing by sheet-fed offset, gravure, and flexo methods. Reverse side treatment allows for easy glueing and curl control.

Americhem, Inc.
Cuyahoga Falls, OH 44222
Oct 06, 2008 Added directly during manufacturing process, nGrain(TM) enables production of building materials with consistent effects that emulate natural woodgrain. Color is built into formulation and will not delaminate, crack, or be nicked/cut. Formulations can be altered to exhibit wood effects from bold grains to subtle feathering. Effective with range of resins, product can be used in monoextruded, coextruded, and foamed products as well as with wood or cellulosic composite compounds.

ION Industrial
Windsor Locks, CT 06096
Oct 01, 2008 Featuring solid-state engineering, ION POWER(TM) Virtual AC(TM) Static Neutralizers come in plug-and-play communication/control modules and static bars that connect to industrial networks or automated machinery. Units are suited for web converting and plastic bag making applications with ability to neutralize static charges from over 30 in. away and on webs moving over 3,000 fpm. To integrate neutralizers with machinery, 8300 COMMUNICATOR modules connect 8100 POWER MODULES to industrial networks.

Creative Materials Inc.
Tyngsboro, MA 01879-2724
Oct 01, 2008 Adhering to variety of transparent conductive oxides, Silver Conductive Inks and Adhesives operate in high humidity environments and provide optimal environmental aging. Inks are used in grid lines and buss bars printed onto TCO's in thin film solar cells, while adhesives connect multiple solar cells to build arrays. Two-component 118-09A/B187 ink offers 0.0005 W-cm volume resistivity, while single-component 123-39C adhesive features volume resistivity of 0.0003 W-cm.

Magstar Technologies
Minneapolis, MN 55447
Oct 01, 2008 Featuring multiple adjacent rollers across full conveyor bed and 24 Vdc brushless motor for variable speed control up to 90 fpm, Quickdraw® XLR accommodates products of varying sizes and random orientation. It uses low-profile, modular, clean slip roller design and handles dynamic loads up to 120 lb (60 lb static). Compatible with auxiliary devices, conveyor integrates into existing equipment lines and can accommodate any plant floor layout. Standard and custom lengths are available.

Delkin Devices, Inc.
Poway, CA 92064
Oct 01, 2008 SensorScope System features SensorSafe custom sized wands and SensorVac vacuum, enabling photographers to gently clean any digital SLR camera sensor. SensorSafe wands are offered in 24 mm full frame, 20 mm medium range, and 16 mm sizes to fit 3 most common sensor sizes in D-SLRs. With ergonomic design, SensorVac includes soft brush tip to gently release the static bond of debris, and then draws the debris away from sensor and out of camera chamber.

Koch Knight LLC
East Canton, OH 44730
Sep 30, 2008 Available in standard ceramic or glaze-resistant construction, 1 in. FLEXISADDLE(TM) LPD® features high open area and aerodynamic design that results in low pressure drop and efficient heat transfer, optimizing capacity of regenerative thermal oxidizers in ethanol industry. Ceramic, 3-rib structure limits nesting and withstands chamber loading, minimizing dead areas that collect particulate.

Millipore Corp.
Bedford, MA 01730
Sep 30, 2008 Featuring configurable 500 L container, Mobius MIX500 disposable mixer can be used with Mobius process containers, Lynx® connectors, Opticap® filters, connectors, and tubing. Magnetically-driven, instant-on impeller minimizes particle generation and enables risk-free media and buffer preparation. Unit is suitable for mixing pharmaceutical ingredients from intermediates to final drug products and for preparation of process solutions, such as buffers and media.

NuSil Technology
Carpinteria, CA 93013
Sep 30, 2008 Fluorosilicone high consistency rubber (HCR), FS-3780, is designed to endure harsh environments where finished parts are exposed to fuels and extreme temperature conditions. Delivered as uncatalyzed HCR, it requires addition of platinum- or peroxide-base catalyst to cure with heat. It can be used for transfer or compression molded parts - gaskets, stoppers, seals - and can also be extruded or calendared depending on processing requirements.

Unifrax Corp.
Niagara Falls, NY 14305
Sep 30, 2008 Exhibiting thermal stability at operating temperatures up to 3,092 or 3,272°F, Fibermax® Duraboard® 1700/1800 suit applications where sag resistance is critical. Duraboard 17R/18R have rolled finish, while Duraboard 17H/18H are compressed during manufacturing for optimum density and sanded smooth. Offered in ½, 1, 1½, and 2 in. thicknesses, products can be heat-treated to remove all organic content. Specialty shapes with similar product properties may also be provided upon request.

Grant Instruments (Cambridge) Ltd
Cambridgeshire SG8 6GB  United Kingdom
Sep 30, 2008 Designed for biotech, biopharmaceutical, and academic research laboratories, Grant-bio PSU-20 heavy duty microprocessor controlled orbital platform shaker provides orbital motion, reciprocation, and vibration functions. Programmable mixing functions can be set for continuous or timed operation (1 min to 96 hr) to achieve optimum mixing either in single mode or in any different combination of 3 functions. Measuring 140 x 485 x 520 mm, unit features loading capacity of 15 kg.

Walton Plastics, Inc.
Walton Hills, OH 44146
Sep 29, 2008 Suitable for use in outside weathering applications, Walplax 200 high temperature vinyl compound can be colored in dark colors, such as green, blue, black, without loss of physical properties. Thermoforming can be done on traditional tooling designed for vinyl use. Target uses include storage pods, exterior shutters and trim, siding, and material wrapping.

Millipore Corp.
Bedford, MA 01730
Sep 29, 2008 With aseptic design, GMP30000 mixer is developed for use in mixing operations as high as 30,000 L in sterile production of pharmaceuticals as well as high-end food and beverage applications. Large mixer size can also be leveraged for mixing smaller volumes at high viscosity and/or specific gravity. It offers low level mixing and maintained integrity of vessel, eliminating risk of contamination.