Sugino Corp.
Itasca, IL 60143
Oct 29, 2008 Designed to wash and remove machining chips from simple and complex shaped parts, single station Spa-Clean Jet provides travels of 23.62, 25.59, and 17.72 in. in X, Y, and Z axes. System combines Fanuc 21iMB control system and 5-axis robot, enabling all sides of part to be addressed at pressures from 500-3,000 psi. Suited for pre-cleaning and final wash applications, machine is equipped with closed loop filtration to 5 microns and is fully programmable using g-code and m-code format.

Modern Process Equipment, Inc.
Chicago, IL 60623
Oct 28, 2008 Utilizing Gran-U-Lizer(TM) technology, metallurgical silicon grinding system, MPE Si Process, is designed to grind 98% pure metallurgical grade silicon to ideal size required for high-purity silicon purification reactors. It accepts large chunks of metallurgical Si and discharges fine ground Si with typical particle size ranging from 50-200 microns, or as required, for post reactor purification.

Objet Geometries Inc.
Billerica, MA 01821
Oct 28, 2008 Designed to print true-to-life parts, Alaris(TM)30 is based on PolyJet(TM) Photopolymer Jetting Technology, which achieves resolution of 600 x 600 dpi by jetting FullCure photopolymer materials in 28 micro layers. Each layer is immediately cured and hardened by UV light, producing models that can be handled immediately without additional post-curing. Support structure enables complicated geometries, such as cavities, overhangs, undercuts, delicate features, and walls as thin as 0.6 mm.

Garlock Sealing Technologies
Palmyra, NY 14522
Oct 28, 2008 Fused to surface of gasket material, Flange Free(TM) reduces time and effort required to remove gaskets from flanged joints after extended service. Inorganic coating does not contain chemicals that can cause gaskets to crack or otherwise degrade. Treatment reduces potential for residual particles to adversely affect performance of replacement gaskets or break loose, contaminate piping systems, and impair operation of downstream equipment.

Rogers Corporation
Rogers, CT 06263 0188
Oct 27, 2008 Featuring specific stiffness values and elasticity properties, BISCO L3-A provides vibration mitigation isolation under all travel conditions. It provides safety protection as mandated by various American and European safety standards, including both British and French fire protection standards. Exhibiting less than 1% compression set, low weight, low flame, and low smoke solution reduces need for refurbishments over railcar's operational lifetime.

Unitek Miyachi Corporation
Monrovia, CA 91017 7133
Oct 24, 2008 Unitek Eapro DT-500-PH Desktop Hot Bar Bonding System is suited for applications which require hot bar bonding multiple parts in array at one time, bonding multiple flexes onto one PCB, or bonding one flex to both PCB and LCD. System includes Uniflow2 power supply for selective hot bar soldering, heat sealing, and conductive adhesive bonding applications. Utilizing pulsed heat technology, it provides targeted heating/precision temperature control for flex circuits, ribbon cables, and wires.

Solutia, Inc.
Saint Louis, MO 63166
Oct 24, 2008 AIR Blue automobile windscreen film, AIR80BLSRHPR, utilizes nonmetallized, nonconductive ceramic technology film that is scratch- and corrosion-resistant. It reduces temperature of vehicle interior surfaces by up to 30°F and blocks 99.9% of UV light while reflecting just 9% of visible light, rejecting 43% of total solar energy. It also ensures no signal interference with radios, GPS, keyless entry, cellphones, and navigation devices.

Hobart Brothers Co.
Troy, OH 45373-2900
Oct 23, 2008 Able to be used in all welding positions, self-shielded Fabshield® 23 suits general-purpose welding fabrication and repairs on thin gauge mild or galvanized steel and coated materials. It requires no shielding gas, enabling use outdoors or in drafty conditions, and produces minimal spatter to help minimize post-weld cleanup. Suitable for single-pass welding applications, wire is offered in .030, .035, .045, 1/16, and 3/32 in. dia in multiple packaging weights.

3D Systems Corporation
Rock Hill, SC 29730
Oct 22, 2008 Offering transparency, flexibility, and durability, Accura® ClearVue(TM) Plastic features modulus range that bridges ABS and polypropylene. Low viscosity facilitates drainage and clean-up as well as recoating. Applications include automotive headlamp lenses, hydraulic and pneumatic functional models, and form, fit, and function parts and prototypes. With material, designers and engineers can also visualize internal structures and simulate lenses and other optical components.

Huron Technologies, Inc.
Leslie, MI 49251
Oct 21, 2008 Providing low gloss control from 1.8-2.4, Mold Release Coating RC 7644 preserves richness of paint color while offering scuff and mar resistance. Product also lowers build-up on mold surfaces and performs well with glued leather adhesion. Packaged in 5 gallon pails, 55 gallon drums, and 345 gallon totes, RC 7644 is suited for automotive steering wheels, armrests, and interior components.

3D Systems Corporation
Rock Hill, SC 29730
Oct 21, 2008 Able to produce finely detailed RealWax(TM) patterns from digital data for direct investment casting, ProJet(TM) CPX 3000 3D Printing System suits high-volume, high-resolution applications. It uses Multi-Jet Modeling technology combined with VisiJet® CPX200 wax build material and VisiJet S200 dissolvable wax support material. In addition to 2 selectable build modes, system offers part nesting and stacking capabilities as well as single-pass printhead design.

Shuman Plastics, Inc.
Depew, NY 14043
Oct 20, 2008 Non-abrasive Dyna-Purge® SF is safe to use in extrusion applications such as profile, sheet, cast film, blown film, and compounding. Engineered purging compound eliminates black specks and gels and leaves no residue behind. Product minimizes scrap rates and bubble breaks, as well as wrinkles or lines in film. In addition, no mixing, soaking, or machine adjustments are required.

Merquinsa North America Inc.
Seabrook, NH 03874
Oct 20, 2008 Featuring renewable content up to 60% according to ASTM D6866, Bio TPU Grades offer alternative to petroleum-based TPUs and TPEs with recyclability and both abrasion and scratch resistance. Pearlthane® ECO thermoplastic polyurethane grades of 85A, 90A, 95A, 98 shore A, and 60 shore D hardness complete range of Bio TPU for Green injection molding elastomeric applications.

Master Chemical Corporation
Perrysburg, OH 43552
Oct 16, 2008 Effective in range of operations from surface and centerless grinding to broaching, gear hobbing, surface, pocket, and thread milling, TRIM® E906 emulsion has balance of cooling and lubrication that extends tool life and surface finishes. Tight emulsion reduces carryoff and gets fluid to point of cut. E906 does not contain phenol, is removed with water, working solution, or TRIM® CLEAN aqueous cleaners, and can be recycled or disposed of with conventional techniques and equipment.

PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Oct 16, 2008 With 6, 13, or 28 L capacities, Refrigerating/Heating Circulating Baths are offered with choice of controllers. Programmable Controller offers LCD display, ±0.01°C temperature stability, and time/temperature programming, while Advanced Digital Controller has variable-speed pump and RS-232 interface. Featuring 2-speed pump, Standard Digital and Basic Controllers, suited for applications where temperature set points remain relatively static, have stability of ±0.05 and ±0.2°C, respectively.

Momentive Performance Materials
Strongsville, OH 44149
Oct 16, 2008 Formulated without plasticizers, SPUR+ 3100HM and SPUR+ 3200HM high modulus, low viscosity prepolymers contain no free isocyanates, and are suited for use as binding agents in structural adhesive formulations. When cured alone, SPUR+ 3100HM provides tensile strength of 450 psi and Shore A hardness of 40, while SPUR+ 3200HM offers 1,000 psi tensile strength with Shore A hardness of 60. Shelf life of products is approximately 12 months.

Modern Process Equipment, Inc.
Chicago, IL 60623
Oct 15, 2008 LPP 6.5 roller-style Gran-U-Lizer(TM) grinds material to narrow particle size distribution, with few unwanted fines, while minimizing impact and heat generation during process. Suitable for achieving results on lab and pilot plant scale, precision particle reduction solution offers independent control over roll gap, with accuracy to 0.0005 in.; roll shear ratio, with independent drive control for each roll; and roll corrugations, with sizes and shapes tailored for application.

Metso Minerals
North Bay, ON P1B8K4
Oct 15, 2008 Rated to 3,000 hp, high-capacity Vertimill reduces number of mills required in secondary grinding applications for mining industry. Design employs minimal moving parts to reduce maintenance concerns but also minimizes energy as well as grinding media consumption. Product is typically used in concentrate regrind applications with fine feed and product size.

Objet Geometries Inc.
Billerica, MA 01821
Oct 14, 2008 Available in 2 kg cartridges, Durus(TM) FullCure® Materials support Eden250(TM) and Eden260(TM) office machines. DurusWhite FullCure430 gives white transparent look and feel of final products made of polypropylene, while also simulating strength of polypropylene. Material features Izod Notched Impact of 44.22 J/m, elongation at break of 44.2%, and modulus of elasticity of 1,135 MPa. It offers resistance to fatigue and enables snap-fit functionality over time.

Nordson Corp., Packaging Systems
Duluth, GA 30097
Oct 13, 2008 AltaBlue(TM) TT systems featuring dual stream pumps can deliver variety of hot melt adhesives in applications requiring duplicate metered streams with optimal bead consistency and uniformity. Along with choice of 3 displacement dual stream pumps, melters offer variable-speed AC motors and key-to-line capability. Tubular Teflon®-coated tank eliminates dead corners and minimizes adhesive degradation, while control panel offers choice of programming methods and displays system status.