Parker Hannifin Corp., Seal Group O-Ring Div. (ORD)
Lexington, KY 40509
Aug 05, 2008 Formulated for high-purity semiconductor processing up to 608°F, Parofluor ULTRA material FF370-75 is suited for aggressive oxygen and fluorine plasma applications requiring minimal erosions and particle generation. Purity and unique properties of this opaque black, non-filled FFKM minimize potential for particle generation in oxygen- and fluorine-rich plasmas. Through unique compounding techniques, level of ionic contaminants is also minimized.

Parker Hannifin Corp., Seal Group O-Ring Div. (ORD)
Lexington, KY 40509
Aug 05, 2008 Addressing risks associated with animal-derived products used in manufacturing processes, EJ280-70 is completely free of animal ingredients and also meets USP Class VI requirements. Its construction eliminates concerns over possibility of transmitting Bovine Spongiform Encephalopathy (BSE), or Mad Cow Disease, through elastomeric seal.

Parker Hannifin Corp., Seal Group O-Ring Div. (ORD)
Lexington, KY 40509
Aug 05, 2008 Designed to meet requirements of USP Class VI systemic toxicity, intracutaneous injection, and muscle implantation studies, 75 durometer V1274-75 is FDA compliant, with low compression set, low extractables, and steam resistance for sterilization cycles. In addition to pharmaceutical processing, material can be used in steam sterilizers and disposable/repeat medical device sterilization.

Dow Corning Corp.
Midland, MI 48686 0994
Aug 05, 2008 Composed of silicone copolymer to eliminate VOCs from its composition, OP-8800 Premium Hydrophilic Softener offers softness, water absorbency, and wicking with minimum to no impact on original substrate whiteness and stain-release properties of fluorocarbon-treated textiles. High-shear and high-pH stable product is compatible with anionic treatments.

CRC Industries, Inc.
Warminster, PA 18974
Aug 04, 2008 Foaming Coil Cleaner is high performance, heavy duty foaming alkaline detergent blend that cuts through dirt, grease, oil, and other types of residue. Low odor product does not require any rinsing and 360° spray value can be sprayed from any position, even upside down. NSF C1 and A1 Registered for use in meat and poultry plants, it contains no Class I or Class II Ozone Depleting Chemicals or chlorinated solvents and has no flash or fire point.

Stedman
Aurora, IN 47001
Aug 01, 2008 Grand Slam(TM) uses high-chrome metallurgy to increase wear life of machine components, reducing metal replacement costs. Crush Plus(TM) Grinding Path System creates third crushing chamber to maximize one-pass product yield, while Max-Yield(TM) Automated Apron Adjustment System maintains gap setting adjustment for aprons and grinding path. Impactor is suited for use with aluminum dross and brick, clay, shale, grog, refractory brick, ceramics, floor tile, glass, and scrap carbide recycling.

Quadrant Engineering Plastic Products Inc.
Reading, PA 19612-4235
Aug 01, 2008 With flexural modulus in excess of 1,400,000 psi and moisture absorption of .10%, Semitron MDS 100 is suited for sockets for semiconductor test and package equipment and fixtures for electronics testing. Offered in thicknesses from .04-.236 in. in sheet sizes of 9.84 and 19.68 in. square, it features coefficient of linear thermal expansion of 1.1 x 10^-5, and heat deflection, or softening temperature, of 210°C.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Aug 01, 2008 Designed to reproduce look of upscale, patterned, tempered glass, Acriglas® Clear Impressions series has crystal clarity and can be made with textures on one or both sides of sheet. Textures included are Brushed, Woven Silk, Mesozoic, Precambrian, Box Mini-Flute, Waffle Iron, Techno, and Morning Dew. Offered in standard size of 4 x 6 ft and in thickness ranging from 1/8 to ½ in., sheets can be thermoformed to create custom light fixtures or configured to meet any specification.

Emerson Process Management
Austin, TX 78754
Aug 01, 2008 Environmentally friendly Dosaodor-D computerized pressure injection system utilizes solenoid injector algorithm to ensure uniform odorant atomization into natural gas in transmission and distribution pipelines. Pressure injection system, with frequent small injections of odorant and wick distribution insert, is accurate over large range of pressures and flow rates. ROC800 series controller enables configuration and operation of system for measurement of data in real time.

Pregis Corp.
Deerfield, IL 60015
Jul 31, 2008 Made from up to 20% post-consumer recycled content and up to 20% industrial scrap, Astro-Bubble® Green is designed for use as surface cover and void-fill to protect fragile items. Sizes from 1/8-½ in. dia are available in coextruded and monolayer linear-low density polyethylene (LLDPE) versions to address various packing requirements. Solution is engineered to incorporate at least 30% recycled content without losing product integrity.

Walton Plastics Mfg., Inc.
Walton Hills, OH 44146
Jul 31, 2008 Exhibiting chemical resistance and temperature flexibility, Flexible Polyurethanes (TPUs) are available in polyether-, polyester-, and aliphatic-based versions to match specific film and sheet requirements. Specialty grade polyurethanes are also available, including halogenated and non-halogenated fire retardant, static dissipative, as well as versions certified to NSF, FDA, and European standards. Material ranges from 70 Shore A to 60 Shore D and .030-.250 in. thick.

Objet Geometries Inc.
Billerica, MA 01821
Jul 31, 2008 Addressing broad range of applications, DurusWhite FullCure430 gives same milky-white look and feel of final products made of polypropylene. It simulates toughness (Izod notched impact of 44.22 J/m), flexibility (elongation at break of 44.2%) and strength (modulus of elasticity of 1,135 MPa) of polypropylene. Available in environmental friendly, sealed 3.6 kg cartridges, DurusWhite works with Connex500, Eden500V, Eden350V, Eden350, and Eden330/333 3D printing systems.

Trans Tech America, Inc., An ITW Decorating Co.
Carol Stream, IL 60188
Jul 30, 2008 Suited for use in medical applications, Type 434 ink offers high opacity and adhesion to both untreated and pretreated polypropylene substrates. Ink features fast drying single component and offers fast start-up, especially in rotary applications. High gloss ink is available in both black and white.

Air Products & Chemicals, Inc.
Allentown, PA 18195
Jul 29, 2008 XeCovery^SM On-site Xenon Recovery System is service that allows semiconductor manufacturers to recover and reuse xenon gas. Based on technology utilizing Vacuum Swing Adsorption, process is capable of extracting xenon from process effluent streams. Enriched mixture of recovered xenon, typically in percent levels, is compressed and stored. Full vessels are then transported off site for distillation.

CoorsTek
Golden, CO 80403
Jul 29, 2008 PlasmaPure(TM)-UC Alumina offers extreme purity (99.9%) critical for semiconductor, electronic, and optical industries. Able to extend component life and reduce contamination, ultra-high-purity ceramic material exhibits etch resistance in corrosive chemistries, minimal sodium content, and dielectric loss tangent under 0.00002. Fine-grained material also exhibits corrosion resistance and minimal sodium content.

Kimball Midwest
Columbus, OH 43228
Jul 28, 2008 Protecting materials by reducing heat transfer during soldering, brazing, welding, and open flame contact, Therma-Shield Heat Protection Paste eliminates disassembly of valves and other components. It can be applied to almost any surface or material, and conforms to irregular shapes and surfaces to provide total coverage and protection. Product is non-flammable, non-toxic, non-corrosive, and biodegradable, and helps eliminate waste as it can be applied only where needed.

Philadelphia Mixing Solutions
Palmyra, PA 17078 9518
Jul 28, 2008 Designed for mixing heavy-duty concentrations of water and wastewater, RAVEN(TM) 3800 Series can be used in caustic and corrosive environments. It features cast-iron housing with open tank mounting configurations, input and intermediate shaft designs for reduced deflections, C-Face motors with piloted motor adapters, dry wells, and end covers. With drive-sleeve design, unit comes in double and triple reductions from 4:1 to 130:1 overall gear ratios to accommodate various requirements.

PB Swiss Tools
Gainesville, GA 30501
Jul 25, 2008 With soft handle surface that ensures secure grip even if hands are wet, SwissGrip® screwdrivers transfer rotational forces of the hand to screw, maximizing torque. Compact 8215 ESD Screwdriver Set includes ESD handle and precision screwdrivers. Designed to check screw tightening torques for assembly operations, 8315A ESD Torque® Handles come with preset torque setting range of 10 cNm to 5 Nm, which can be adjusted according to specific requirements.

Soitec, Inc.
Peabody, MA 01960
Jul 25, 2008 Fabricated using Smart Cut(TM) process, ultra-thin top silicon and ultra-thin Buried Oxide meet advanced requirements in terms of defectivity, flatness, and silicon-on insulator thickness control of up to ±10 Angstroms. Top silicon layer of wafers is available in thicknesses ranging from 20-110 nm, while BOX can be as thin as 10 nm. Substrates are suited for partially depleted and fully depleted devices, including multi-gate transistor architectures.

Misumi USA
Schaumburg, IL 60173
Jul 22, 2008 Suited for building of machinery and equipment, Urethane, Rubber, and Sponge Components come in round and metal plate-mounted versions as well as configurable block versions. Urethane and rubber bumpers feature round tips, and come in choice of solid or through-hole designs. With diameters, lengths, and through-hole sizes configurable in 1 mm increments, hundreds of sizes and shapes are available. Urethane blocks mounted on metal plates are offered in flat, V-shaped, and corrugated designs.