Stedman
Aurora, IN 47001
Jul 21, 2008 With optimal hydraulic drive system that offers variable mill speeds, Model VS-88 V-Slam(TM) Vertical Shaft Impactor features speeds of up to 12,500 fpm and capacity range of 5-500 tons/hr. Offering high operating speed for fine grinding, it has low profile split swing lid, indexing feed tube and anvil ring, and automatic recirculating lubrication system. Applications include minerals and ores, slag, bottom boiler ash, flux, alloys, glass, chemicals, magnesite, corn, salt, and coke.

Turbex Ltd
Alton   United Kingdom
Jul 18, 2008 Suited for use in repair and maintenance shops serving transport depots, railyards, and marine workshops, AS-150 has load capacity of 800 kg, and can accommodate components measuring 900 mm high by 1.4 m across diagonal or diameter. It uses detergent cleaning medium dissolved in water heated to 50-75ºC, delivered at 400 Lpm, and 4 bar pressure through rotating spray pipes. Model AS-100 is suited for cleaning components up to 950 x 700 mm and weighing maximum ½ ton.

Schulman, A. Inc.
Akron, OH 44309
Jul 18, 2008 Invision PX modified polypropylene-capped TPO (thermoplastic olefin) sheet and Invision TX mono-layered TPO sheet offer high melt strength allowing for large process window, for processing flexibility. They also provide high stiffness which enables processors to down-gauge.

Brewer Science, Inc.
Rolla, MO 65401
Jul 17, 2008 Exhibiting bonded pair rigidity and thermal stability, Brewer Science WaferBOND(TM) HT-10.10 bonds fragile device wafers to rigid carriers to allow thinning and subsequent processing to create through-silicon vias (TSVs). This spin-on polymeric temporary wafer bonding material is resistant to solvents, acids, and bases. Device structure planarization with total thickness variation of less than 0.5 µm on 10 µm coating permits thinning to 50 µm and beyond.

Spectronics Corp.
Westbury, NY 11590
Jul 15, 2008 Formulated specifically for large industrial systems, oil-based OIL-GLO(TM) 40 pinpoints leaks in all synthetic- or petroleum-based fluid systems, including light-colored hydraulic fluid, very dark or intensely blue hydraulic and lubrication fluids, compressor oil, engine oil, and gearbox oil. Product can remain safely in system for periodic re-checks, eliminating need to add more dye until oil is changed.

Graymills Corporation
Chicago, IL 60613
Jul 15, 2008 Model PH822-A environmentally minded, solvent-free parts washer offers electrical control interface to provide complete machine status to operator. Unit features flow-thru work brush, flexible stay put nozzle, adjustable thermostat, 300 gph pump, GFCI protection, and triple-action filtration. Washer is 4-legged, and comes with sink and stainless steel work shelf which can be removed to expose 10 in. deep soak area.

Simrit, A Div. Of Freudenberg-NOK
Plymouth, MI 48170
Jul 15, 2008 With service temperature of -6 to 300°C, Simriz® 508 exhibits plasma resistance and minimum particulation in range of plasma environments. White perfluoroelastomer material is designed for thermal stability and nearly universal protection against chemical attack. Suited for deposition, oxide, and metal plasma etching, ashing, metallization, and ion implant, product is appropriate for chamber lid seals, bell jar seals, endpoint windows, gas inlet seals, and isolator valve seals.

E. F. Bavis & Associates, Inc.
Maineville, OH 45039
Jul 15, 2008 Designed to replace pneumatic tube systems used in drive-thru service lanes at banks, TransTrax® uses less than 1/10th electricity, has only 4 moving parts, and is constructed of recyclable materials, most of which are aluminum. By using positive drive system and smart sensors, single motor operates only when needed to deliver carrier. TransTrax delivers to 2 vehicle heights and is unaffected by weather conditions.

NOVOMER, INC.
Ithaca, NY 14850
Jul 15, 2008 Suited for electronics and ceramics manufacturing, NB-180 PPC degrades completely and uniformly into environmentally benign products, providing mechanical strength to ensure consistency, solidification, or adhesion. Amorphous, colorless thermoplastic polymer produces ash residues less than 5 ppm. Based on 3% binder use levels, residual ash levels in finished parts are less than 1 ppm. NB-180 can be produced in customized viscosities and molecular weights to meet specific requirements.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jul 14, 2008 Resistant to nuclear, chemical, and biological (NBC) threats, Thermorad 700 Series NBCCS fluoroelastomers are suited for cable jackets and wire insulation in applications requiring NBC contamination survivability (NBCCS). Grades are available to cover -55 to +125°C (Thermorad 770), -55 to +175°C (Thermorad 780), and -65 to +200°C (Thermorad 790) temperature ranges and are offered as option in custom multi-core cabling products. Each grade is thoroughly tested.

JBC Tools USA, Inc.
Cary, IL 60013
Jul 11, 2008 With up to 140 W of power, BT 8808 promotes throughput while working at lower temperatures. This fosters solder joint reliability and eliminates cold joint issues. For optimal thermal recovery times, station uses microprocessor-driven JBC Advanced Technology.

ON Semiconductor, LLC
Phoenix, AZ 85008
Jul 11, 2008 Capable of clamping input ESD waveform of 15 kV to less than 7 V in matter of nanoseconds, Models ESD7L5.0D and NUP4212 protect ESD sensitive ICs. Offered in 1.2 x 1.2 x 0.5 mm SOT-723 package, ESD7L5.0D protects 2 high speed data lines at 0.5 pF capacitance/line as well as D+ and D- lines of USB2.0 port. Available in 1.6 x 1.6 x 0.5 mm UDFN-6 package, NUP4212 protects 4 high speed data lines at 0.7 pF/line and 2 Vcc power lines as well as D+, D-, and Vcc line on 2 USB ports.

Sandmeyer Steel Co.
Philadelphia, PA 19116
Jul 11, 2008 Providing corrosion resistance in both oxidizing and reducing conditions, Type 825 (UNS N08825, W. Nr. 2.4858) is nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. It is available in plate thicknesses from 0.1875-2.00 in. thick. Alloy is suited for chemical, petrochemical, food processing, nuclear fuel reprocessing, waste handling, oil and gas production, petroleum refining, pollution control, and steel pickling industries.

STMicroelectronics
GENEVA   Switzerland
Jul 10, 2008 From 2.42 x 1.92 x 0.65 mm flip-chip package, EMIF06-AUD01F2 implements complete EMI filtering and ESD protection for stereo headset output and external/internal microphones. Audible handset demodulation noise is eliminated by achieving -25 dB attenuation throughout stop-band 800-2,480 MHz using high-density 1.3 nF PZT capacitors on microphone lines. ESD protection is achieved via combination integrated TVS diodes, low-inductance packaging, and Z-R-Z pi-filter topology.

STMicroelectronics
GENEVA   Switzerland
Jul 10, 2008 With 0.85 pF maximum capacitance at 240 MHz, Model USBULC6-2M6 minimizes distortion and helps designers meet 10 pF maximum specified line loading for operation up to 480 Mbps. Protecting high-speed USB, including Vbus, it meets IEC61000-4-2 level 4 specifications to 15 kV air-gap discharge as well as 8 kV contact discharge, and has breakdown voltage of 6.1 V. Device features low maximum leakage current of 0.5 µA to reduce power consumption and preserve battery life.

Saint-Gobain Corporation
Valley Forge, PA 19482-0101
Jul 10, 2008 Supplied in 46 x 78 in. sheets to accommodate larger designs, Keralite® FR-R and Keralite FR-F are wireless, fire-rated glass-ceramics that help architects meet fire and impact safety requirements of local building codes. While Keralite FR-R is used in fire-rated locations such as transoms and borrowed lites, Keralite FR-F has surface applied safety film for high impact safety (CPSC Category II) and is used in locations where accidental human impact safety ratings are required.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jul 09, 2008 Ceramabond(TM) 685N is single part, dispensable, zirconium silicate based adhesive and sealant system that is used to bond ceramic honeycombs to metal frames used in construction of gas-fired ceramic radiant heaters. Thixotropic, water-dispersible, and fast-setting paste contains no asbestos or VOCs, and exhibits tensile-shear strength of 500 psi and linear shrinkage of less than 2% after curing. It is available in pint, quart, gallon, and 5 gal pails.

California Micro Devices
Milpitas, CA 95035
Jul 08, 2008 Based on coupled inductor design, Praetorian® III LC filter architecture utilizes 6-pole pi-filter topology and enables design of filters that can fit into small form factor, 0.4 mm pitch uDFN and chip scale packages. Filters, optimized for inductance and capacitance (down to 10 pF), promote attenuation and signal integrity. Products based on this architecture address EMI filter and ESD protection (to 15 kV) requirements found in handset designs.

Cool Polymers
Warwick, RI 02886
Jul 07, 2008 With ability to dissipate heat, CoolPoly® thermally conductive polymers are suited for wound coils and other electronic components and devices. Including reduced surface and part temperature, injection moldable polymers are designed for applications in molded bobbins and other wound devices such as solenoids, ignition and clutch coils, surface mount coils, and transformers.

Laird Technologies
Chesterfield, MO 63017
Jul 07, 2008 Optimized for Intel's Penryn mobile Quad-Core CPU, T-pcm(TM) 670 and T-pcm 680(TM) soften at regular chip operating temperatures to fill microscopic irregularities found in surfaces of microchip package and heat-sink. Mix of thermally conductive fillers and resins serves to minimize resin migration and pump-out. Both RoHS-compliant phase change thermal interface materials are inherently tacky and flexible to facilitate application and handling.