Maguire Products, Inc.
Aston, PA 19014
Oct 22, 2008 Eliminating need for operator to vacuum bottom of gaylord when resin levels are low, The Sweeper(TM) continuously sweeps length and breadth of top level of resin in container, reaching into every corner, leaving less than handful of pellets behind. It has vacuum switch for ensuring unit is operating only while vacuum loading system is pulling material, and does not have to be manually started or stopped. Unit plugs into standard 115 V outlet and requires less than 2 A.

Bulgin Components PLc
Barking Essex IG11 0AZ  United Kingdom
Oct 21, 2008 Molded in glass-filled nylon with nickel silver contacts, BX0123 is designed for single CR123A cell accommodation with base or PCB mounting; 2 fixing holes are provided for base mounting and PC spills for PCB mounting. It has -30 to +70°C operating temperature and is designed for equipment requiring extended life in high-drain applications, such as LED torches, film cameras, and digital cameras.

Meese Orbitron Dunne Co.
Ashtabula, OH 44004
Oct 21, 2008 Fitted with enclosed fork tubes, P-333 e-Scrap Bulk Container permits user to collect, cover, and transport computer electronics waste in same container. Unit can also be securely forklifted, rotated, and dumped upside down over roll-off or trailer to consolidate larger volumes for transport and shipping. Rotationally molded in single piece of 100% polyethylene, reusable container withstands heavy weight, sharp corners, and awkward shapes without cracking, chipping, or warping.

Eaton Corp.
Cleveland, OH 44114
Oct 20, 2008 Eaton 9395 System Bypass Module (SBM) makes it possible to parallel up to 32 x 9395 UPSs with non-identical kVA ratings up to 1,100 kVA. SBMs feature customizable cabinet with LCD touchscreen to display system and UPS status and control system operation. Navigation scheme allows access to key information such as battery runtime remaining, event and alarm history, and system metering.

Master Magnetics, Inc
Castle Rock, CO 80104
Oct 20, 2008 Roll N' Cut(TM) Dispenser accommodates one ½ in. wide x 15 ft long roll of .060 in. thick magnetic tape (included) rated at 6 lb of pull per foot. Featuring cut-to-length functionality via lever actuation for desired amount of magnet, dispenser also protects roll from gathering fine filings, paper clips, and staples while stored. Bright green color of trilingual clamshell package promotes visibility, while transparent and removable cover facilitates refills.

GBI Data Sorting Systems, Inc.
Deerfield Beach, FL 33442
Oct 20, 2008 Driven by contactless induction motors, cross-belt sorter offers automatic product loading by utilizing series of metered induction belts. Each cross-belt car unit contains smart processor with its own independent set of controls, enabling range of functional capabilities that can be configured on-the-fly. Sort and cross-belt action instructions, such as variable belt speeds and multiple dispatching positions, are communicated across contactless infrared link.

Anver Corp. - Anver.Com
Hudson, MA 01749
Oct 20, 2008 Featuring 2 outside sealing edges and 1 inner seal, Vacuum Pad with Bonded Seals one-piece suction cup has non-skid surface and shallow lip that evenly distributes vacuum forces to protect load. It is available in nitrile or silicone construction with internal steel plate reinforcement, and offers lifting capacity of up to 1,100 lb horizontal. Measuring 13 x 21 in. when pressed onto load surface, product can handle glass and stone panels in vertical and horizontal position.

DE-STA-CO Industries
Birmingham, MI 48009
Oct 20, 2008 Available in light-, medium-, and heavy-duty specifications, DCM Series is equipped with pivotal motor mounts for continuous operation. With max length of 16 ft and widths from 1.77-5.5 in., light-duty model handles part widths up to 4.6 in. and transports up to 44 lb. Medium-duty model is available in chassis widths from 2.4-9.8 in. and can operate with single or dual belt. Driven by 230/480 V spur gear motor, heavy-duty model comes in 7.9-31.5 in. widths and transports up to 275 lb.

Joraco, Inc., Toggle-Aire Div.
Smithfield, RI 02917
Oct 20, 2008 Featuring user-programmable 24 V PLC, Custom Press Feed Payout System feeds, aligns, die-cuts, punches, or assembles combined delicate materials and pulls through finished product at up to 100 SPM with +0.001 in. accuracy. It handles up to 5 plies of material from 5 separate reels, and utilizes photo-optic proximity sensors and two-hand actuator for operator safety. Standard features include die area safety interlocks and emergency stop and reset buttons.

Techno, Inc. - CNC Router Systems
New Hyde Park, NY 11040
Oct 17, 2008 Available with single/dual carriage options, 75 mm wide Narrow Profile Slide 2 is constructed from single rigid aluminum extrusion profile and capable of speeds up to 24 ips. Three sides of T-slots facilitate mounting on any machine assembly, and lengths are offered up to 2,722 mm. Internal components include 2 precision steel rails, bearing blocks, and 16 mm dia anti-backlash ball screw drive. Carriage plate is also included, as are internal home reference and far end limit switches.

Meese Orbitron Dunne Co.
Ashtabula, OH 44004
Oct 17, 2008 With 4-way access, P-433 Ship Shape(TM) Container enables lift truck drivers to locate fork access points quickly without using forks to rotate containers or requiring workers to position container manually. Rotationally molded in single piece of 100% weatherproof polyethylene, reusable container unitizes payloads up to 700 lb on standard 44 x 44 in. footprint. Container safely stacks 2 high when filled and covered, and nests for storage and return.

Hendrix Wire & Cable Corp.
Milford, NH 03055
Oct 16, 2008 Able to minimize amount of vegetation needing removal when clearing right-of-way for distribution circuits, Spacer Cable Systems have compact design capable of withstanding temporary contact with branches without causing outages. The covering limits electrical charge on surface, and phase to phase or phase to ground contact will not be lethal for wildlife. Polymer components are made of 100% No.2 HDPE recyclable plastic.

Bobcat Company
West Fargo, ND 58078
Oct 16, 2008 While able to run 40+ Bobcat® attachments from front lift arm with 1,300 lb operating capacity (1,500 lb with counterweight), Toolcat(TM) 5610 also includes Category 1 three-point hitch and hydraulic 540 rpm power take off (PTO) for use of rear implements. Machine's 4-wheel independent suspension and 4-wheel drive system with limited slip differentials lend to smooth operation, while all-wheel-steer capability enables turning radius of 17.5 ft.

Fluid Metering, Inc. (FMI)
Syosset, NY 11791
Oct 16, 2008 PDS-100 Programmable Dispensing System uses precision stepper motors to control valveless piston pumps and offers range of 500 nl per dispense to 2 lpm continuous flow. It accommodates all FMI pump sizes in both fixed and adjustable displacement configurations. Pump heads are mounted to control unit, which is housed in rugged anodized aluminum enclosure that has LED readout to display menu driven programming, as well as membrane switches for navigating through programming steps.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 15, 2008 Designed to electrically insulate high temperature ceramic resistors, green-pigmented Cerama-Diptm 538N-GREEN inorganic-ceramic coating can be used for applications up to 2,600°F. It offers volume resistivity of 109 ohm-cm and dielectric strength of 225 V/mil at room temperature. Curing is achieved by air-drying at room temperature for 1-2 hr, then step curing for 1-2 hr at 200 and 350°F, respectively. Coating comes in standard pint, quart, gallon, and 5 gal containers.

Master Magnetics, Inc
Castle Rock, CO 80104
Oct 14, 2008 With pull capacity from 4-13 lb, Heavy Duty Magnetic Bulk Parts Lifters are suitable for lifting screws, nuts, bolts, metal wires, and scrap metal pieces. Units feature fingertip pull on release bar that drops entire load in desired location. Standard units have nylon lower case, but stainless steel is available for hot or very abrasive material. Long-handled models are also available for reaching bottom of barrels.

Flexicon Corporation
Bethlehem, PA 18020 8006
Oct 13, 2008 Along with all-stainless construction finished to sanitary standards, Swing-Down(TM) has pivot-down fill head that enables operator to connect empty bags at floor level. Controls simultaneously lower and pivot fill head, stopping it in vertically oriented position that places bag inlet spout inflatable connection, inflator button, and 4 bag loop latches within reach of operator standing on plant floor. Optional features include vibratory decks and roller conveyor.

Nordson Corp., Packaging Systems
Duluth, GA 30097
Oct 13, 2008 AltaBlue(TM) TT systems featuring dual stream pumps can deliver variety of hot melt adhesives in applications requiring duplicate metered streams with optimal bead consistency and uniformity. Along with choice of 3 displacement dual stream pumps, melters offer variable-speed AC motors and key-to-line capability. Tubular Teflon®-coated tank eliminates dead corners and minimizes adhesive degradation, while control panel offers choice of programming methods and displays system status.

Igus, Inc.
East Providence, RI 02914 0349
Oct 13, 2008 Developed for indoor/outdoor cranes as well as conveyor systems, System P4 exhibits minimal noise and wear at high speeds - even with loads up to 20 lb/ft. There is almost no weight limit due to center links, and each link has same pitch to minimize vibration in radius. Tested outdoors at speeds to 23 fps over distances of 400 ft, carriers have plastic bridges and grooves along surface so that upper run glides smoothly over lower run. Plastic rollers are firmly integrated into sides.

Eriez Magnetics
Erie, PA 16514
Oct 13, 2008 Constructed with Erium 3000 rare earth magnet material, Model XPL-30/24 has capacity rating of 3,000 lb on flat and 2,400 lb on round material and can handle round material of 4-15 in. dia. Capable of handling 6-18 in. dia material, XPL-50/40 has capacity of 5,000 lb on flat material and 3,700 lb on round material. Magnets are suited for machine shop operations such as loading and unloading of machining centers.