Eagle MHC
Clayton, DE 19938
Aug 18, 2008 Offering wide range of choices in horizontal and vertical closed carts as well as open-wire cart designs, customizable Steril-Eze® surgical case carts feature super-clean type 300 series SS construction. Bottom shelf can be sloped slightly forward to allow drainage, while doors have their own integral drain systems to control against moisture entrapment. Removable interior shelf brackets allow for easy cleaning and relocation of shelves.

Harrington Hoists, Inc.
Manheim, PA 17545 1754
Aug 14, 2008 Offered in standard single speed and under-the-cover, variable frequency drive, dual speed, 3-phase NER/ER Series includes The Guardian Smart Brake Technology, which consists of fail-safe, maintenance-free brake. Units feature upper and lower limit switches, nickel-plated load chain, and 5 or 6 pocket load sheaves. Count hour meters, which record lowering starts and hoist on time, are standard on both NER and ER models for preventive maintenance.

iwis Drive Systems, LLC
Indianapolis, IN 46241
Aug 13, 2008 Available with pitches of 12.70 and 19.05 mm, Megalife Power and Free Conveyor Chains feature sintered metal running rollers and built-in lubricant reservoir, which supplies links and rollers with lubricant during operation. Chains remain clean throughout service life and do not contaminate products. Models with steel rollers can be used at temperatures from -40 to 160°C, while versions with plastic conveying rollers are suitable for up to 80°C.

Holjeron
Pittsburgh, PA 15206
Aug 13, 2008 Using Zonelink(TM) controls and Microroller® powered rollers, off-the-shelf or customized harsh-duty subsystems suit freezer/refrigerator and warehouse applications. Pre-engineered 2-zone controller features complete wiring for plug-and-run operation and may include 24 Vdc power supply. Dual Zero Pressure Accumulation (ZPA) motor driver control cards provide selectable modes of operation. With stainless steel seamless construction, harsh-duty Microrollers are rated from -20 to +140°F.

Colson Caster Corp.
Jonesboro, AR 72401
Aug 13, 2008 Available in 3 load capacities of 500, 700, and 1,200 lb, Business Machine Casters feature wheels with glass-filled, nylon construction. They are built to move heavy and compactly built equipment in situations where low height allowances affect stability and balance. Casters have 3 in. dia with ergonomically smooth riding 1 13/16 in. tread width and load height of 4 1/8 in.

Schunk
Morrisville, NC 27560
Aug 12, 2008 Available in 100, 160, and 250 mm sizes, TANDEM KSP plus is built with one-piece, rigid base body that has compact, chip-deflecting shape and wear-resistant parts to promote sturdiness and minimize maintenance. Multi-tooth guidance of base jaws, length of jaw guidance, and exact centering via clamping sleeves help reduce jaw lifting to achieve repeat accuracy up to 0.01 mm. Other features include piston lubrication system and gripping forces up to 60 kN.

Flexicon Corporation
Bethlehem, PA 18020 8006
Aug 12, 2008 Constructed of carbon steel with industrial finish, or stainless steel finished to industrial, food, dairy, or pharmaceutical standards, Bulk Bag/Drum Filler features Swing Down® fill head that pivots down for connecting empty bags at floor level. Remote console or wall-mounted panel houses controls to raise and pivot fill head into locked, horizontal fill position. Machine can be switched to drum filling mode by positioning swing-arm-mounted chute under fill head discharge port.

Schunk
Morrisville, NC 27560
Aug 12, 2008 Able to handle small components or large workpieces, PEH 50 servo-electric gripper features maximum stroke of 100 mm per finger and gripping force that can be adapted to applications up to 315 lbf with maximum finger length of up to 250 mm. Gripper has brushless servo-motor, which is used as drive, and guides that are designed for precise handling at high loads. Integrated controller enables simple programming, pre-configuration, and commissioning.

Sealant Equipment & Engineering, Inc.
Plymouth, MI 48170-0965
Aug 12, 2008 Mobile See-Flo® 202 cart mounted positive-displacement meter-mix dispensing system can apply precision beads and small metered shots of precisely mixed resins such as epoxies, acrylics, urethanes, and silicones. It includes supply tanks/pumps, See-Flo 202 meter, and manual/automatic mix-dispense valve for manual/automated material application. Mobility feature allows complete dispenser to move to next product assembly area instead of moving products to dispensing system.

Ivy Associates Limited
Shanghai   China
Aug 12, 2008 Designed to address issue of damaging parts during transportation operations, Ivy Shock Pillow© helps reduce impact forces associated with railcar coupling actions. Logistics damage prevention product absorbs transit induced forces, which are typically generated by cargo impacting the end walls of rail boxcars, trailers, or sea containers, before they can be transferred into cargo. It impedes transfer of kinetic energy from impact shocks.

Nordson Corp., Packaging Systems
Duluth, GA 30097
Aug 11, 2008 PatternJet(TM) hot melt adhesive labeling system with EcoPattern(TM) technology allows bottlers to control materials and energy usage while fostering recyclability. System's non-contact adhesive guns deliver spirals of adhesive onto any size container with little or no stringing. Able to apply adhesive at any speed, system eliminates adhesive circulation and provides system insulation. Integrated, closed-system design minimizes maintenance and line stoppages.

Altech Corp.
Flemington, NJ 08822
Aug 08, 2008 With halogen-free duroplastic construction that eliminates potential for metal-induced short circuits, Altech® fireproof enclosures can sustain flame protection up to 90 minutes in accordance with DIN 4102 Part 12, and offer ingress protection (water leaks) to IP 54 or IP 66. Rugged and shock-resistant units are available in wide range of sizes with 3-, 5-, or 8-pole terminal blocks, depending on model. All versions are self-extinguishing and can be lead sealed.

Komatsu America Corp.
Rolling Meadows, IL 60008
Aug 08, 2008 With operating weight of 32,480-33,900 lb and heaped bucket capacity of 3.25-3.5 yd³, Model WA320PZ-6 Wheel Loader suits construction, utility, government, sewer, waste, and agricultural markets. Powered by 167 hp SAA6D107E-1 engine, it features parallel linkage design, which improves visibility for operations such as loading pallets and other materials onto forks. Unit also provides parallel movement with large tilt force for both bucket and fork applications.

Aerovation Products
Tipp City, OH 45371-8728
Aug 08, 2008 Checkpoint Friendly(TM) eliminates requirement of removing laptops from bags when going through airport security checkpoints. Bag functions by holding laptop in compartment separate from accessories and other items, peels open for placement on X-ray screening belt, and quickly folds shut once screening is done. It uses top-hinge method of opening and closing to return bag to its carrying configuration when picking it up from belt.

Acutronic USA, Inc.
Pittsburgh, PA 15238
Aug 08, 2008 Optimized for MEMS inertial device testing, Model AC217 enables manufacturers to mechanically stimulate their products for calibration and performance verification. Integrated motion controller allows precise measurement and closed-loop control of position, rate, and acceleration, and supports a subset of industry-standard Acutronic Command Language (ACL) for communicating with host computer. Optional web browser interface for local control of table is also available.

Lee Company, The
Westbrook, CT 06498 0424
Aug 05, 2008 Power Generation Chek® Valves are field serviceable, allowing users to disassemble and service valves using rebuild kit. Featuring low leakage and high flow, units are suited for use in purge air, water injection, and liquid fuel applications. Available with or without removable, washable Hi-Bar® Safety Screen, valves can be designed according to specific customer requirements.

Interroll Corp.
Wilmington, NC 28405
Aug 05, 2008 Designed specifically for decline conveyors with fail safe requirement, Model EC100B RollerDrive features spring loaded fail safe brake that prevents drifting on inclines while ensuring smooth operation and low noise emission. Mechanical rotor-locking break is spring-loaded and cycles with main power; it does not cycle with each start and stop of the conveyor. As long as the power bus is on, the magnetic force created by solenoid keeps rotor free.

Meese Orbitron Dunne Co.
Ashtabula, OH 44004
Aug 05, 2008 MOD Material On Demand system integrates 2 plastic hoppers capable of holding up to 800 lb each with designed-in bench scales all secured within powder coated steel frame, and enables measured amount of material to be dispensed. Machine operators draw material from one hopper during production and when it is empty, material is drawn from second hopper without halting production. Empty hopper is removed by forklift and replaced with fully loaded hopper without idling staff or machinery.

Eriez Magnetics
Erie, PA 16514
Aug 04, 2008 Using ProSort and FineSort(TM), scrap handlers can recover nearly 90% of metals passing through scrap yard. Airless Prosort uses metal sensors aligned with electromagnetically driven paddles to separate valuable metals from waste. Able to recover metals less than 1 in. diameter, FineSort receives discarded fines that have passed through initial screening process and uses magnetic components to separate ferrous and non-ferrous metals from fines waste.

RNR Plastics, Inc.
Raynham, MA 02767
Aug 04, 2008 Displaying custom messages virtually anywhere on railings or tubing, RNR Magna-Hinge(TM) Vinyl Sign Holders feature reinforced strap with 2 encapsulated rare earth magnets that can wrap around railings, tubing, or closed handles and attach securely to each other. Offered in range of colors, splash-resistant units also come in tamper-evident versions. Made from 10 ga PVC, they permit barcode scanning, and come in 4 x 6 to 8½ x 11 in. sizes and can also be custom designed.