Flexicon Corporation
Bethlehem, PA 18020 8006
Aug 12, 2008 Constructed of carbon steel with industrial finish, or stainless steel finished to industrial, food, dairy, or pharmaceutical standards, Bulk Bag/Drum Filler features Swing Down® fill head that pivots down for connecting empty bags at floor level. Remote console or wall-mounted panel houses controls to raise and pivot fill head into locked, horizontal fill position. Machine can be switched to drum filling mode by positioning swing-arm-mounted chute under fill head discharge port.

Schunk
Morrisville, NC 27560
Aug 12, 2008 Able to handle small components or large workpieces, PEH 50 servo-electric gripper features maximum stroke of 100 mm per finger and gripping force that can be adapted to applications up to 315 lbf with maximum finger length of up to 250 mm. Gripper has brushless servo-motor, which is used as drive, and guides that are designed for precise handling at high loads. Integrated controller enables simple programming, pre-configuration, and commissioning.

Sealant Equipment & Engineering, Inc.
Plymouth, MI 48170-0965
Aug 12, 2008 Mobile See-Flo® 202 cart mounted positive-displacement meter-mix dispensing system can apply precision beads and small metered shots of precisely mixed resins such as epoxies, acrylics, urethanes, and silicones. It includes supply tanks/pumps, See-Flo 202 meter, and manual/automatic mix-dispense valve for manual/automated material application. Mobility feature allows complete dispenser to move to next product assembly area instead of moving products to dispensing system.

Ivy Associates Limited
Shanghai   China
Aug 12, 2008 Designed to address issue of damaging parts during transportation operations, Ivy Shock Pillow© helps reduce impact forces associated with railcar coupling actions. Logistics damage prevention product absorbs transit induced forces, which are typically generated by cargo impacting the end walls of rail boxcars, trailers, or sea containers, before they can be transferred into cargo. It impedes transfer of kinetic energy from impact shocks.

Nordson Corp., Packaging Systems
Duluth, GA 30097
Aug 11, 2008 PatternJet(TM) hot melt adhesive labeling system with EcoPattern(TM) technology allows bottlers to control materials and energy usage while fostering recyclability. System's non-contact adhesive guns deliver spirals of adhesive onto any size container with little or no stringing. Able to apply adhesive at any speed, system eliminates adhesive circulation and provides system insulation. Integrated, closed-system design minimizes maintenance and line stoppages.

Altech Corp.
Flemington, NJ 08822
Aug 08, 2008 With halogen-free duroplastic construction that eliminates potential for metal-induced short circuits, Altech® fireproof enclosures can sustain flame protection up to 90 minutes in accordance with DIN 4102 Part 12, and offer ingress protection (water leaks) to IP 54 or IP 66. Rugged and shock-resistant units are available in wide range of sizes with 3-, 5-, or 8-pole terminal blocks, depending on model. All versions are self-extinguishing and can be lead sealed.

Komatsu America Corp.
Rolling Meadows, IL 60008
Aug 08, 2008 With operating weight of 32,480-33,900 lb and heaped bucket capacity of 3.25-3.5 yd³, Model WA320PZ-6 Wheel Loader suits construction, utility, government, sewer, waste, and agricultural markets. Powered by 167 hp SAA6D107E-1 engine, it features parallel linkage design, which improves visibility for operations such as loading pallets and other materials onto forks. Unit also provides parallel movement with large tilt force for both bucket and fork applications.

Aerovation Products
Tipp City, OH 45371-8728
Aug 08, 2008 Checkpoint Friendly(TM) eliminates requirement of removing laptops from bags when going through airport security checkpoints. Bag functions by holding laptop in compartment separate from accessories and other items, peels open for placement on X-ray screening belt, and quickly folds shut once screening is done. It uses top-hinge method of opening and closing to return bag to its carrying configuration when picking it up from belt.

Acutronic USA, Inc.
Pittsburgh, PA 15238
Aug 08, 2008 Optimized for MEMS inertial device testing, Model AC217 enables manufacturers to mechanically stimulate their products for calibration and performance verification. Integrated motion controller allows precise measurement and closed-loop control of position, rate, and acceleration, and supports a subset of industry-standard Acutronic Command Language (ACL) for communicating with host computer. Optional web browser interface for local control of table is also available.

Lee Company, The
Westbrook, CT 06498 0424
Aug 05, 2008 Power Generation Chek® Valves are field serviceable, allowing users to disassemble and service valves using rebuild kit. Featuring low leakage and high flow, units are suited for use in purge air, water injection, and liquid fuel applications. Available with or without removable, washable Hi-Bar® Safety Screen, valves can be designed according to specific customer requirements.

Interroll Corp.
Wilmington, NC 28405
Aug 05, 2008 Designed specifically for decline conveyors with fail safe requirement, Model EC100B RollerDrive features spring loaded fail safe brake that prevents drifting on inclines while ensuring smooth operation and low noise emission. Mechanical rotor-locking break is spring-loaded and cycles with main power; it does not cycle with each start and stop of the conveyor. As long as the power bus is on, the magnetic force created by solenoid keeps rotor free.

Meese Orbitron Dunne Co.
Ashtabula, OH 44004
Aug 05, 2008 MOD Material On Demand system integrates 2 plastic hoppers capable of holding up to 800 lb each with designed-in bench scales all secured within powder coated steel frame, and enables measured amount of material to be dispensed. Machine operators draw material from one hopper during production and when it is empty, material is drawn from second hopper without halting production. Empty hopper is removed by forklift and replaced with fully loaded hopper without idling staff or machinery.

Eriez Magnetics
Erie, PA 16514 0608
Aug 04, 2008 Using ProSort and FineSort(TM), scrap handlers can recover nearly 90% of metals passing through scrap yard. Airless Prosort uses metal sensors aligned with electromagnetically driven paddles to separate valuable metals from waste. Able to recover metals less than 1 in. diameter, FineSort receives discarded fines that have passed through initial screening process and uses magnetic components to separate ferrous and non-ferrous metals from fines waste.

RNR Plastics, Inc.
Raynham, MA 02767
Aug 04, 2008 Displaying custom messages virtually anywhere on railings or tubing, RNR Magna-Hinge(TM) Vinyl Sign Holders feature reinforced strap with 2 encapsulated rare earth magnets that can wrap around railings, tubing, or closed handles and attach securely to each other. Offered in range of colors, splash-resistant units also come in tamper-evident versions. Made from 10 ga PVC, they permit barcode scanning, and come in 4 x 6 to 8½ x 11 in. sizes and can also be custom designed.

ID Technology Corp.
Fort Worth, TX 76106
Aug 04, 2008 Featuring conveyor with variable speed side belt and rollers that drive empty carton through system, Model IDT 250 Printer Applicator is used to print and apply multi/single panel labels to empty boxes. It accommodates cartons from 10-24 in., and utilizes thermal transfer technology to print and apply variable information labels on-line, producing barcodes, text, and graphics at speeds up to 12 ips on various label substrates. Options include range of scanners, verifiers, and counters.

REGO-FIX Tool Corp.
Indianapolis, IN 46268
Aug 04, 2008 Comprised of toolholder and collet, powRgrip® PG 32 uses mechanical properties of holder material to generate gripping force with run-out below 0.0001 in. Available in metric and inch diameters up to 25 mm and 1 in., respectively, system is suited for high speed machining applications, and offers range of taper selection, including CAT, BT, HSK and TC versions. It takes less than 10 sec to press in any tool or remove it from holder.

Time Domain Corp.
Huntsville, AL 35806
Aug 04, 2008 Offered as flexible, enterprise-level ultra wideband (UWB) system, PLUS(TM) v2.0 monitors interaction of thousands of assets, as close as 12 in., through multiple walls and floors as well as in RF-noisy indoor environments with sub-room level accuracy. Interaction-level asset information is delivered in real-time to optimize workflow efficiency and asset utilization while linking asset to business process for auditing or compliance.

Graco Inc.
Minneapolis, MN 55440
Aug 04, 2008 Suited for potting, gasketing, sealing, encapsulation, and syringe filling, Model PR70v variable ratio meter, mix and dispense system features Graco Control Architecture(TM) Fluid Control Module, which offers simplified wiring system and board-level diagnostics. It is designed for applications using up to 70 cc shot sizes, material ratios from 1:1 to 24:1 with accuracy to 1%. Available with range of feed package options, unit includes MD2 dispense valve for accuracy under high pressure.

Anver Corp. - Anver.Com
Hudson, MA 01749
Aug 01, 2008 Available as electric- or air-powered with pad configurations, Anver VFP-57 side-oriented vacuum lifter lets users feed large sheet or plate into presses and other equipment from narrower end. Featuring adjustable, telescoping arm assembly that slides into beam and is counterbalanced for smooth operation, it is suited for applications where stacked sheet or plate is only accessible from the end. Unit includes handlebar controls, vacuum guard system, and audio-visual alarm.

Bosch Rexroth Corp., Pneumatics Div.
Lexington, KY 40511
Aug 01, 2008 Suited for applications in tight installation conditions, RTC series compact rodless cylinders are available in 4 versions with 5/8-3 in. dia and maximum stroke length of 32.5 ft. RTC-BV (Basic Version) is suitable for universal use, while RTC-CG (Compact Guide) version offers high precision packed into compact dimensions. RTC-EG (E-line Guide) is guided version of rodless cylinders and RTC-HD (Heavy Duty) version is designed for handling heavy loads.