Airpot Corp.
Norwalk, CT 06851
Sep 05, 2008 Constructed using graphite piston/borosilicate glass cylinder combination, Piston and Cylinder Sets respond to forces as low as a few grams and pressures less than 0.2 psi. Starting and running friction are almost identical, preventing jerky, uncontrolled starts. Exhibiting friction of less than 1 g without side loads, sets are unaffected by extreme temperature variations, run clean, and do not contaminate surrounding components. Cylinder bore sizes range from 0.220-1.75 in.

Fastrax Ltd.
Vantaa 01510  Finland
Sep 05, 2008 Integrating hardware and software, Track&Trace Platform is based on uTrace03 telematics module, which consists of GPS receiver, GSM/GPRS modem with quad band antenna, and connectors. Also included are development board, and automotive interface board with power supply, optional automotive bus connections, sensors, and flash memory bank. Software includes functions for GPS navigation, database for points of interest, and embedded file system for storing navigation and event logs.

Herkules Equipment Corp.
Walled Lake, MI 48390 1662
Sep 04, 2008 Featuring bolt-together design, A-Series General Industry Lift Tables are air-operated material handling scissor lifts that allow new components to be added when needed. Its power source, Air Bag(TM) technology provides direct 1:1 lift ratio, eliminating stress on the scissors, minimizing wear and maintenance. System raises pallets/containers to ideal height, from 7" to 32", eliminating the need for worker to strain and bend while unloading/loading material.

Anver Corp. - Anver.Com
Hudson, MA 01749
Sep 04, 2008 Featuring Easy Tilt quad-link system that helps retain vertical/horizontal position when properly centered on load, VP-Series Vacuum Lifter-Tilter handles loads up to 500 lb. Suitable for stone, glass, and plate handling, it has side handlebar that can be mounted to left or right, and lets users control pick-up with one hand and tilt with other. Powered by electric, compressed air, or battery, unit can be equipped with range of suction pad attachments.

Fleetwood, Inc.
Romeoville, IL 60446
Sep 04, 2008 Designed to depalletize multiple products to individual lines, Robotic Bulk Depalletizer removes products in full layer via magnetic or vacuum pick-head. Separator sheets are removed and stacked as are pallets themselves. Handling up to 8 SKUs at same time, Robotic Rotary Case Palletizer is suited for companies palletizing multiproduct rainbow packaging or with multiple lines feeding common palletizer. Unit features product confirmation via barcode scanning and ability to detect reject cases.

SmartMove(R) Conveyors
Fall River, MA 02720
Sep 04, 2008 Combining function of 2 independent drives within same framework, SmartMove® Multi-Lane Conveyor suits transfer and accumulating applications. Combination of bidirectional drive and seamless transferring can provide simple rotary and carousel accumulation/delivery systems. Compatible with Shortline and Long Line systems and accessories, unit comes in any combination of belting that totals less than 30 in. wide.

J. W. Winco, Inc.
New Berlin, WI 53151
Sep 04, 2008 Made of aluminum and available in metric and inch sizes, Solid Disk Handwheels feature highly-polished turned rim and matte gray, shot-blasted, satin finish that does not require painting or other surface treatments. They are gravity die-cast with concentric rim that is square to bore. Optional revolving handle is constructed of matte black nylon plastic with zinc-plated steel threaded spindle. Other modifications available include keyways and set screw holes.

IFH Group
Rock Falls, IL 61071
Sep 03, 2008 Capable of handling lubricants, hydraulic fluids, and cutting and engine oils, Model IFH-199 is suited for storing caustic materials, such as herbicides, degreasers, water based products, and water treatment chemicals. It also suits smaller lube rooms or fluids that are infrequently used. System provides clean, environmentally friendly product transfer, with no drum tipping, cleaning, and switching and no replacement of drum pumps, regardless of application.

Applied Materials, Inc.
Santa Clara, CA 95054
Sep 03, 2008 Extending HARP SACVD® gap-fill technology for critical STI2 device structures to 32 nm and beyond, Applied Producer® eHARP(TM) system delivers void-free films to fill less than 30 nm, greater than 12:1 aspect ratio features. High-density, strain-inducing films enable scaling of conventional planar and emerging 3D device structures. Virtually carbon-free, eHARP film requires no protective liners or capping layers, integrates with CMP processes, and provides reliable device isolation.

Enviroline Group (IECC)
Pompano Beach, FL 33069
Sep 02, 2008 Offering thin-film application of up to 20 mils DFT, Enviroline 375UHS is suited for use as internal lining for storage tanks, process vessels, pipelines, and concrete containment structures requiring corrosion protection from refined petroleum products and chemicals. It has VOC level of 95 g/l and meets South Coast Air Quality Management District (SCAQMD) regulations. Areas of use include oil and gas, as well as chemical processing industries.

Bishop-Wisecarver Corporation
Pittsburg, CA 94565 0209
Sep 02, 2008 Available in component form or as ready mounted assembly, HepcoMotion® HDS2 Heavy Duty Slide System is offered in 3 sizes, including 150 mm dia vee bearing and 144 mm dia taper roller bearing. Maximum single bearing capacity is 50kN. Low friction cap wipers expel dirt and debris while providing continuous lubrication. Slides and tracks are available in single piece construction up to 4 m long, and are offered in single or double edge format in V slides or flat tracks.

LPI Lift Systems
Eau Claire, WI 54703
Sep 02, 2008 Measuring 45 ft long by 72 in. wide, platform offers fall prevention system and work area for staging packing materials used in constructing shipping crates. With lift capacity of 1,500 lb, it extends from lowered height of 5 ft to maximum raised height of 12 ft 6 in. Unit has 2 independent control stations, floor mounted pedestal control station that includes Emergency Stop, Z-axis control for up and down movement, and Y-axis control for extension/retraction of platform movement.

Specialty Equipment
Houston, TX 77055
Aug 29, 2008 Designed to transfer empty drums from conveyor and stack them onto pallet, Model EDP-500 air-over-electric system loads 30-55 gal steel, fiber, or poly drums in 4, 5, or 6 drum pattern, onto pallet. Average load time is 4 drums/minute, and automatic pallet dispenser is available to discharge waiting pallet. Featuring steel components and all-welded construction, unit has selector switch to keep transfer carriage in home position allowing tall IBC to pass through.

Material Transfer & Storage, Inc.
Allegan, MI 49010 0218
Aug 28, 2008 Built with features that maximize production efficiency, Material Master(TM) low-headroom unit has 145 in. overall height and can be custom-designed to fit individual application requirements. It incorporates 316 stainless steel Seal-Master(TM) bag spout access chamber, 316 stainless steel product contact surfaces, and heavy-duty Flo-Master(TM) massaging system. Also, low-headroom electric hoist with motorized trolley allows bulk bags to be safely loaded without forklift.

Guyson Corporation of U.S.A.
Saratoga Springs, NY 12866
Aug 28, 2008 Fitted with direct pressure media delivery module, Model 8-EP is suitable for processing components with large amount of surface area and for surface treatment operations such as descaling, etching, coating removal, and surface preparation. Consisting of cyclonic separator linked to ASME-certified pressure vessel, pressure-blast module is attached to rear of blast cabinet. Most types of dry blast media can be used, including plastic grit, glass beads, and fast-cutting mineral grit.

DE-STA-CO Industries
Madison Heights, MI 48071
Aug 28, 2008 Offering max holding capacity from 295-1,680 lb, horizontal handle hold-down action clamps of 2013, 2017, 2027, and 2037 series incorporate ergonomic handle grip, 2 flanged washers, and spindle assembly. Straight base options are available, and knob on end of open U bar prevents spindle slippage. While low pivot points provide for perpendicular clamp force, straight downward action helps prevent workpiece movement in fixture. Hand clearance in open position eliminates pinch points.

DE-STA-CO Industries
Madison Heights, MI 48071
Aug 28, 2008 With max conveyor length of 16 ft and chassis widths from 1.77-5.5 in., light-duty DCM Series handles part widths up to 4.6 in. and can transport up to 44 lb. Systems are driven by regulated, brushless 24 Vdc motor with variable speed and selectable direction. Medium-duty conveyors, operating with single or dual belt, come in chassis widths from 2.4-9.8 in., while heavy-duty models, driven by 230/480 V spur gear motor, come in widths from 7.9-31.5 in. and transport up to 275 lb.

Colson Caster Corp.
Jonesboro, AR 72401
Aug 26, 2008 Available in 4 models with 75, 80, 90, and 95 Shore A durometer polyurethane tread, Triumph(TM) Wheels are suited for all manufacturing environments including tow-line, automotive, and tire manufacturing sites. Non-marking polyurethane wheels, constructed in red, blue, and brown, depending upon model, are equipped in either Round or Crown tread for managing obstructions and enhanced swivel. Units resist damage from chemicals, acids, oils, and other caustic substances.

J. W. WINCO
New Berlin, WI 53151
Aug 26, 2008 With 35° angled contact surface that allows for improved access even in tight spaces, such as corners, Cabinet U-Handles are produced from profile aluminum extrusions, and feature smooth surface and ergonomical shaping. Available in metric sizes, handles can be offered coated with powder coat epoxy resin in black powder-coated pebble, bright tumbled, or natural anodized finishes. Various metric size fasteners, special handle lengths, and kit packaging are also available.

Network Technologies, Inc. (NTI)
Aurora, OH 44202
Aug 26, 2008 Compatible with USB-enabled computers, SUN USB KVM Drawer combines rackmount LCD monitor, trackball or touchpad mouse, and 4-, 8- or 16-port USB DVI KVM switch in space-saving 1RU industrial strength unit. It also features SUN USB keyboard that is available in multiple languages such as English (US), English (UK), German, Italian, French, and Spanish. Made of rugged steel, unit has torque-friction hinges to ensure that monitor does not wobble, spring, or slam shut.