Toyota Material Handling U.S.A., Inc.
Irvine, CA 92623-7419
Sep 25, 2008 Featuring common rail direct fuel injection system, IC pneumatic lift trucks are used in construction, lumber yards, metal fabricators, agriculture, and concrete and masonry yards. They come in 6 models with 22,000-35,000 lb capacities at 24 in. load center. Including 2-speed transmission with 2-stator torque converter, trucks offer synchronized steering, wet disc brake, fully oiled lift cylinders as well as Deluxe Steel Cab option for extreme environments.

Hardinge Workholding Division
Elmira, NY 14902
Sep 23, 2008 With large diameter bearings and fail-safe clamp system, Model GD210LP allows part weights up to 220 lb. Table has 210 mm precision ground slotted face plate, offers rotation up to 40 rpm, and uses up to 233 lb-ft of clamping torque to handle off-center drilling, cross-axis milling, and other high-force cutting applications. Operated as standalone unit or as true 4th axis direct connected to machine, table provides ±15 arc-sec accuracy and ±3 arc-sec repeatability.

FIPA, Inc.
Atlanta, GA 30318
Sep 23, 2008 Using hydrogenated nitrile rubber as base material, Bellows Suction Cups are unaffected by ozone and offer resistance to oils with high proportion of additives. Ten models are available, 6 with 2.5 folds and 4 with 1.5 folds. They are low marking and resist abrasion and wear. Able to handle temperatures up to 160°C, suction cups are suited for removing hot plastic parts from their molds and transporting them to next step in production.

Corporate Safe Specialists
Posen, IL 60469
Sep 23, 2008 Automating cash handling process, Treasury Series enables same day bank credit for cash in safes at store level. PIN can be coupled with fingerprint recognition, Dallas Key, or Swipe Card technology for dual access accountability. While employees can make accurate and verified shift-close deposits through touch-screen interface, management can review and reconcile deposits automatically, by cashier or shift, to facilitate day-close reporting.

MicroNet Technology Inc.
Torrance, CA 90501
Sep 23, 2008 Designed for SMBs, RAIDBank4(TM) features eSATA and USB connectivity, 300 MB/sec data transfer rate, and comes in 2 or 4 TB configurations. It integrates 64 bit RISC processor with 128 MB high-speed error correcting cache for heavy data loads. Available with 4-port adapter option, hot swappable device includes 2-port eSATA PCI-Express host bus adapter card and NTI Shadow(TM) backup software. Unit allows simultaneous online RAID expansion, RAID level migration and/or stripe size migration.

Paradigm Group
Syosset, NY 11791
Sep 23, 2008 Produced from commodity PE resins, Emerald(TM) Oxo Biodegradable Garbage Bags incorporate TDPA® (Totally Degradable Plastic Additives). Bags are not affected by moisture and can be re-used. When disposed of in landfill sites or when inadvertently littered, plastic garbage bags will degrade and ultimately biodegrade into carbon dioxide, water, and biomass, which will help reduce build up of methane gas in landfill.

UFP Technologies, Inc.
Kissimmee, FL 34744
Sep 22, 2008 Through Case Fit(TM) service, United Case will engineer solution, secure appropriate case and foam material, fabricate solution, and have it shipped to desired location. Each Case Fit foam exhibits specific protection and aesthetic properties suitable for each application. Examples include electronics equipment that requires shipment in anti-static material, sales presentation kits to protect and display product, or shipping of delicate automotive parts that call for class A surface protection.

Autocrib, Inc.
Santa Anna, CA 92704
Sep 19, 2008 Utilizing series of counter-rotating carousels that provide access to items through 15 doors, RoboCrib 500 allows for both large and delicate items to be dispensed from same machine. It has 12 in. touch screen that enables users to issue and return items from maximum of 628 bins, and compact size enables locating supplies at point of use. RoboCrib v5.3 software with dashboard offers access to critical supplies metrics, and dispenser can be integrated into existing systems or used stand-alone.

Genie, a Terex Company
Redmond, WA 98052
Sep 19, 2008 Combining scissor lift capability and compact size, GRC-12 Runabout(TM) Contractor measures 4 ft 5.75 in. long x 2 ft 5.5 in. wide and is engineered with steel platform and rails. Telescoping mast, encased in steel for protection against worksite debris, enables up to 2 operators to work at heights up to 18 ft. Unit may be driven when fully elevated, has lift capacity of 500 lb, and offers zero inside turning radius. Slide-out extension deck offers extra 17.5 in. of outreach.

Genie, a Terex Company
Redmond, WA 98052
Sep 19, 2008 Featuring 8 ft, 2 in. total width, 80 ft Models S(TM)-80 and S(TM)-85 can be transported over road on standard equipment trailer without special permit. Virtual pivot boom design keeps weight of boom over chassis' center of gravity as it elevates, eliminating need for extra counterweight. To optimize efficiency, elevation time from fully stowed to fully elevated is 68 seconds. Active oscillating axle provides traction in rough terrain for smooth ride.

Caldwell Group, Inc., The
Rockford, IL 61109
Sep 18, 2008 Suitable for wide range of operations, Modular Spreader Beam is configurable at various spreads from 10-22 ft with capacities of 1 or 2 tons. It is lightweight, fits in the back of any pick-up truck, and can be easily assembled. Faspin with lanyard allows for quick adjustment of spread.

Siemens Energy & Automation, Inc.
Elk Grove Village, IL 60007 1902
Sep 18, 2008 Designed for handling baggage at either passenger claim areas or in baggage sorting areas, SIBAG 300C Flat Carousel has moving flat surface that permits convenient display as well as easy removal of baggage. Including control system that monitors and records drive motor and system run time, it features integrated system level intelligence, distributed drive system, and compact, self adjusting friction drive system with automatic drive engagement/disengagement.

Meese Orbitron Dunne Co.
Ashtabula, OH 44004
Sep 17, 2008 Rotationally molded of 100% impact-resistant polyethylene with base set atop 3 steel fork tubes, MOD 50P-16S Scrapasaurus permits forklifts to safely pick up, transport, and lift cart, then rotate it 180° until completely upside down for emptying into roll-off, dump truck, baler, or Gaylord. When empty, cart may be rolled on 6 industrial-strength casters. Accommodating 400 lb payloads, MOD 50P-16S is suited for collecting and managing scrap metal, plastic, paper, and glass.

Fluid Research Corp.
Tustin, CA 92780
Sep 17, 2008 Designed on zero-waste platform, PluraSilver dual component silver epoxy paste dispensing machine keeps material in constant motion to eliminate opportunity for any settling or wasted product. Proprietary fittings that ensure no leaking, minimal clearance agitation where tank agitators fit contours of tanks, and recirculation. Combined, features enable raw material to be purchased in bulk quantities.

GAO RFID Inc.
Toronto   Canada
Sep 17, 2008 Suited for asset locating and tracking and warehouse inventory management applications, 2.4 GHz active beaconing RFID tag has LED that flashes when tag receives specific signal from RFID reader. Featuring tamper-proof alarm that sounds if tag is dislodged, it can be mounted on metal and operates in harsh environments. It offers 100 tag/sec identification rate, 2,000 tag management in RF field, bi-directional reader communication, and transmits ID every 2 sec.

Andrews Glass Co.
Vineland, NJ 08360-5504
Sep 16, 2008 Recommended when operating temperatures are above 175°C, PRV High Temperature Kits are designed to meet need for observing reactions in gases and liquids under pressure. Units feature chemically inert borosilicate glass construction with PTFE insert and PTFE O-ring. Available for first time users, Starter Kit includes needle valve adaptor and stainless steel plug, along with glass vessel and coupling. Both kits come in 3, 6, and 12 oz sizes with regular or footed pressure vessels.

Konecranes Americas, Inc.
Springfield, OH 45502
Sep 16, 2008 Mounted to jib crane within nacelle of turbine, wXN Electric Chain Hoist offers standard lifting capacity from 1/8 to 1 ton, and features suspended hook, standard two-speed hoisting, epoxy-painted protection, and efficient heat dissipation through its ribbed design. Constructed from pressure-cast aluminum, it includes heat-treated, high-precision lubricated gears for quiet operation and friction torque limiter which prevents overloading, accidental over-hoisting, and over-lowering.

Cooper Hand Tools
Apex, NC 27582
Sep 16, 2008 Approved for use with both 5/16 and 3/8 in. Grade 70 transport chain, drop forged and heat treated ratchet-style Grade 70 Load Binder features full 8 in. of take-up. Its 6,600 lb working load limit and 26,400 lb maximum breaking strength rating provide strength for heavy loads. Product is compliant with U.S. D.O.T 393.100-393.102 requirements, and has yellow chromate finish.

Morris Material Handling, Inc.
Oak Creek, WI 53154
Sep 16, 2008 Adaptable to many applications, ZIP-V(TM) Electric Chain Hoist is available in various speeds and frequencies. It features 5-pocket load wheel, plug-in pendant station for ease of installation, and standard chain container that resists oil and dirt and keeps excess chain clear of moving parts to prevent snags or damage. Slip clutch protects operator and equipment from dangerous overloads, while emergency stop button allows for quick access to emergency shut off.

Automation Devices, Inc.
Fairview, PA 16415
Sep 15, 2008 Fork Rhino converts fork lift into equipment handler capable of moving variety of hitch equipment, including ball hitches, goose necks, and pintles. Able to fit forks up to 6 in. wide, solution evenly spreads load over both forks to eliminate fork sag. Product is offered in 4 models - Shackled Fork Rhino, Shackled Fork Rhino Receiver, Pinned Fork Rhino, and Pinned Fork Rhino Receiver - and design does not affect safe operation or capacity of fork truck.