Valvoline Co. The, Div., Ashland, Inc.
Lexington, KY 40509
Nov 02, 2006 Suited for high-speed 4-stroke cycle diesel engines, Premium Blue® SAE 15W-40 Oil is designed to meet 2007 model on-highway exhaust emissions. Product is formulated to optimize corrosion protection for all engine parts and to provide soot control and shear stability. Oil performs in emissions treatment equipped with sophisticated emissions control hardware, including exhaust gas recirculation, diesel particulate filters, and Caterpillar ACERT® technology.

Lumax Lubrication
Fort Mill, SC 29715
Nov 01, 2006 Utilizing 40-60 psi air at 3.5 cfm, PneuLuber(TM) cycles continuously with high-pressure delivery of 6,000 psi. Dual-piston gear motor provides constant torque, enabling user to speed up lubrication and control volume of grease without compromising output pressure. Operating with zero vibration and low noise, self-priming unit has variable speed trigger that lets user control flow, eliminating waste and avoiding contamination and cleanup.

Blaser Swisslube Inc.
Goshen, NY 10924
Oct 09, 2006 Exhibiting emulsion stability, Blasocut® for Magnesium Machining (BC37MG) optimizes part machining capabilities while minimizing waste in magnesium machining without separation. Mineral oil-based, chlorine-free liquid tool has formula that counters issues of instability, separations, and short fluid life. Also suitable for other ferrous and non-ferrous materials, such as brass and/or bronze, solution will not form insoluble lead soaps.

Lubrizol Corp.
Wickliffe, OH 44092 2298
Oct 02, 2006 With ability to handle temperature extremes, high loading, and high speeds, 4300FG series of lubricant additives complies with CFR 21 Section 178.3570 guidelines for NSF HX-1 registration. Components include tackifier and thickener, antioxidants, and corrosion inhibitors. Allowing lube manufacturer to develop products for diverse applications, additive packages are designed to be used in technical white mineral oils, polyalphaolefins, or vegetable oils.

Precision Alliance, The
Fort Mill, SC 29708
Sep 27, 2006 Constructed from compound of super-filtered synthetic lubricants, MSG#1 and MSG#2 optimize smoothness and dynamic life of anti-friction linear bearing and ball screw systems. MSG#1 ensures glassy-smooth, non-sticky feel at low speeds where very fine positioning is required, while MSG#2 features higher penetration number so that it will stay in place during high speed motion, but not so stiff that it will cause churning.

Blaser Swisslube Inc.
Goshen, NY 10924
Sep 11, 2006 Containing vegetable oil-based esters, Vasco 5000 is suited for machining titanium, stainless steel, cobalt chrome, and other difficult to machine materials. Liquid tool exhibits cutting and grinding performance that promotes extended tool life, accelerated cycle times, and optimal surface finish. Sump life of Vasco 5000 maximizes uptime and minimizes disposal while rinse behavior is low-consumption and leaves cleaner machines and parts.

CRC Industries, Inc.
Warminster, PA 18974
Aug 29, 2006 Formulated from blend of silicones, cross linkers, and oils, Chute Lube(TM) lubricates package handling equipment, food processing equipment, chutes, guides, and rail conveyors. Colorless, odorless product will not stain or cause packages to become greasy and is harmless to most rubbers and plastics. Available in 20 oz aerosol cans, Chute Lube(TM) is effective in wide range of temperatures and is NSF H2 registered for use in meal and poultry plants.

Blaser Swisslube Inc.
Goshen, NY 10924
Jul 28, 2006 Water-miscible, semi-synthetic Blasocut® BC 230 is suitable for machining and grinding of aluminum, cast iron, steel, and high-temperature alloys. Product rejects tramp oils, requires no biocide additives, and has refractometer reading of 1:1. Rinse behaviors leave parts and machines clean while minimizing coolant consumption.

NYLOK Corp.
Macomb, MI 48042 4007
Jul 27, 2006 NYPLATE® safe, non-toxic coating forms dry and tack-free film lubricant that seals immediately upon installation. Chemical-resistant product eliminates galling and cold welding while also facilitating disassembly in aggressive industrial environments, even after exposure to temperatures up to 1,292ºF. Dry film lubricant can be selectively or dip spin applied to externally and internally threaded parts and has storage life of up to 4 years.

Acheson Colloids Co.
Port Huron, MI 48060
Jul 27, 2006 Emralon® TM-008 waterborne fluoropolymer lubricant and anti-corrosion coating provides low coefficient of friction along with solvent resistance in permanent lubrication applications. Through consistent and uniform dip spin, spray, and electrostatic application performance, product allows for bulk coating of small parts requiring permanent lubrication. Use results in satin-like finish that imparts noise-suppression on fasteners and rubbing surfaces.

Cortec Corp.
St. Paul, MN 55110
Jul 24, 2006 Formulated with soybeans, EcoLine(TM) Bearing, Chain, and Roller Lubricant features 86% bio-based content and incorporates blend of non-toxic, multi-metal Vapor phase Corrosion Inhibitor (VpCI(TM)) chemistry. Rust preventative lubricant will not change metal surface properties. Formulated to resist sling-off, it forms thin, tight, layer on metal surface, completely sealing off metal against moisture or air. It provides protection for up to 24 months in aggressive environments.

Lubrizol Corp.
Wickliffe, OH 44092 2298
Jul 21, 2006 Using CJ-4 premium performing technology, Lubrizol® 40007 provides viscosity control, valve train wear protection, shear stability performance, piston deposit control, and soot control in 2007 and older diesel engines. Product can be used as stand-alone CJ-4 dispersant inhibitor package, Lubrizol 40007, or CJ-4 booster, Lubrizol 48007, which can be used in conjunction with current CI-4 additive technology and legacy Lubrizol olefin copolymer viscosity modifier.

Dylon Industries, Inc.
Cleveland, OH 44144
Jul 19, 2006 Anti-Seize features multi-sized polished copper flakes and natural graphite in synthetic base that provides corrosion barrier between dissimilar metals, stainless steel, and other metals. Product provides protection against galling, rusting, and heat bonding in extreme heat and pressure, even after exposure up to 1,850°F. No mixing is required, and Anti-Seize will not harden, separate, or evaporate. Available in 1 lb cans with or without brush-top, and 5 gal pails.

Klüber Lubrication
Londonderry, NH 03053
Jun 08, 2006 Authorized in accordance with NSF-USDA-H1 for use in food, beverage, and pharmaceutical applications, Klübersynth UH1 14-151 and UH1 14-222 exhibit anti-wear properties, water resistance, corrosion protection, and optimized aging and oxidation stability. They are recommended for all lubrication points, including rolling and sliding bearings, lifting cylinders, joints, guide bars, and cams.

J Walter, Inc.
Hartford, CT 06114
May 09, 2006 Designed to super-cool bolts to -30°F, COLD SHOCK(TM) causes cold-cracking action of rust and corrosion, allowing oil to seep deep inside threads and nut or bolt to be removed instantly. Available in 400 ml aerosol cans, product is effective on bolts up to 3 in. in diameter and for removing difficult bearings from shafts.

Rayven, Inc.
St. Paul, MN 55104
Apr 28, 2006 Any-Pak is constructed using 2 mil polypropylene as substrate and with release coating that works with hot melt and PSA adhesives. Suited for products such as plastic bags, mailing envelopes, pouches, and security bags, liner is offered in 1.0, 1.25, 1.5, and 1.75 in. widths - all in 12,000 ft lengths. Other sizes are available on custom order basis. Remove to Expose Adhesive message is printed on one side.

Dylon Industries, Inc.
Cleveland, OH 44144
Apr 26, 2006 Designed to forge warm or hot ferrous, super alloy, and powder metal parts, Dyforge 880 can wet dies with temperatures from 150-1,300°F. Water-based colloidal formula contains micro-fine graphite and binder additive package. It provides stability in both concentrated and diluted versions, and can be spray applied to dies for uniform coating and control of metal movement.

Milacron Inc.
Cincinnati, OH 45206
Apr 13, 2006 CIMTECH® Z Fluids are synthetics designed to improve heavy- and light-duty machining and grinding of ferrous and non-ferrous metals without using mineral oil. They feature clear, clean, low-foaming formulation that rejects tramp oil and exhibits optimal rancidity control. By name, products include CIMTECH 305Z, CIMTECH 310Z, CIMTECH 320Z, CIMTECH 3900B, CIMTECH 285Z, and CIMTECH 410Z.

Huron Technologies, Inc.
Leslie, MI 49251
Apr 07, 2006 Mold Release Coatings 6944, 7123, and 7153 provide clean mold release for composite friction materials such as automobile and truck brake composite products. Coatings are non-silicone, water based, dilutable concentrates available in 55 gal drums and 275 gal totes.

International Products Corp.
Burlington, NJ 08016
Mar 24, 2006 P-80® Grip-It quick-drying hose lubricant lubricates tight fitting rubber parts so they slip easily into place, then dries quickly to allow natural tight fit of rubber to return. It can be applied by automatic or manual methods including spray, bath, sponge, brush, or squirt techniques. Lubricant is compatible with metals, plastics, and natural or synthetic rubbers, and has low VOCs, near-neutral pH, and is non-toxic and non-flammable.