Lincoln
St. Louis, MO 63120 1578
Dec 12, 2002 Self-priming, automatic PowerLuber Model 1163 cycles continuously provided that its trigger is pulled. Products includes air motor and air operating range of 40–150 psi. Design incorporates powder paint exterior, chrome-plated grease container, and high-pressure flexible hose. CE certified, unit is suited for heavy equipment, fleet, auto/truck dealership, and agricultural applications.

Castrol Industrial North America Inc.
Downers Grove, IL 60515
Dec 06, 2002 Synthetic emulsion, Syntilo® XG 100 is formulated for grinding ferrous metals as well as nickel and titanium alloys. Extremely bioresistant, Syntilo XG 100 decreases problems associated with dirty, rancid soluble oils by resisting micobial attack in high contamination situations. It has low propensity to foam when applied through high-pressure nozzles, and remains clean running in hard water conditions.

Digilube Systems, Inc.
Springboro, OH 45066
Nov 21, 2002 Tactless and colorless Ultra-Film does not contain moly, solids, or zinc. It deposits clean, semi-dry film suitable for oil-lubricated chains, trolleys, slat-type conveyors, and roller chains that are subject to loads up to 400,000 psi and temperatures to 600°F. Ultra-Film does not attract airborne pollutants and particulate, reducing risk of drippage and parts contamination. It is supplied in 5 gal pails and 55 gal drums.

Jet-Lube, Inc.
Houston, TX 77028 5811
Nov 18, 2002 ALCO EP-73 Plusâ„¢ has water-resistant aluminum complex base and anti-wear additives. Polymer additives further enhance moisture and corrosion resistance and ability to adhere to all types of metal surfaces. Service rating is -25 to 400°F. Grease meets MIL-G-18458 (SH) and can be used for equipment in hot humid climates, steam, and applications that subject or submerge equipment in water. Sizes range from cartridges to 400 lb drums.

NYLOK Fastener Corp.
Macomb, MI 48042 4007
Nov 18, 2002 NYTORQ can be used on any fastener that requires controlled or lower drive torque during installation, such as tri-lobular and self-threading screws. Non-toxic, opaque colored lubricant has melting temperature of 248°F. It meets and exceeds Daimler-Chrysler specification MS9775.

Anderol Company
East Hanover, NJ 07936
Nov 12, 2002 Non-asphaltic Polyguard 4100 synthetic open gear lubricant reduces downtime and scheduled maintenance when performing ore mining and ball milling at extreme temperatures. Product allows for rapid set-up on gear teeth helping to prevent metal loss and reduces volatile organic carbon (VOC) emissions. Transparent amber color makes clean up, inspection, and maintenance simple.

Mobil Branded Lubricants, Exxon Mobil Corp.
Fairfax, VA 22037
Oct 18, 2002 Mobil DTE 21® consists of balanced formulation with additives and low-viscosity base oils. It is specifically designed for high-speed, gear-driven spindle bearings in precision machining centers. Anti-wear and load-carrying ability is demonstrated by its performance in FZG DIN 51534 test, used to estimate lubricant's gear-load carrying capabilities.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Oct 17, 2002 Formulated for use in long-life industrial and severe-duty applications, ViperLube(TM) lubricants are composed of synthetic PAO (polyalphaolefin) base stocks. They offer mechanical and thermal stability; high load carrying capability; and resistance to rust, corrosion, and water. Lubricants consists of NLGI Grade 2/Severe Duty GC-LB Grease, 90w Gear Oil, and 10w Lightweight Oil, all of which are NSF HI rated for incidental food contact.

Exxon Mobil Corp.
Irving, TX 75039 2298
Oct 16, 2002 Mobil Pegasus 905 offers extended drain capability and wear protection without sacrificing cleanliness. It reduces heat exchanger deposits in natural gas gathering, transmission, cogeneration, and combined heat and power applications. Oil consists of additive system with heavy, neutral basestocks and exhibits antioxidant characteristics, viscosity control, and thermal stability.

DuPont Coating & Release Systems
Wilmington, DE 19880-0023
Oct 14, 2002 Krytox® FG products, approved for H-1 food processing applications, perform at operating temperatures from -70 to +762°F (continuous use), are insoluble in water, and resist any water washout. Rust and corrosion resistant, they are also non-flammable and chemically inert. Compatible with all metals, elastomers, and plastics, products do not carbonize. Oils are clear, non-staining, and non-migrating. Greases are clean, pure white, and non-migrating.

Barden Corp., The
Danbury, CT 06813
Sep 30, 2002 Type G-75 grease is designed for high speed machine tool spindle bearings. It combines fully synthetic base oil with Polyurea thickener instead of barium complex soap thickener. G-75 operates at 1.5 M dN continously and is standard on all sealed angular contact bearings. It is available in 30 cc dispenser.

Sprayon Diversified Brands
Cleveland, OH 44115
Sep 11, 2002 Sprayon® Liqui-Solâ„¢ MRO lubricants, cleaners, and maintenance products offer re-useable, adjustable spray triggers. Triggers allow users to dial in specified coverage, from fan spray to pin stream. To recylce/dispose of containers, users remove (and reuse) spray trigger and recycle empty can as scrap metal or dispose of it as non-hazardous waste. Sprayon Liqui-Sol containers come in 14 or 18 oz cans and include food-grade items.

Batson, Louis P., Inc.
Greenville, SC 29608
Aug 28, 2002 ShuR-BusT penetrant, lubricant, and demoisturant immediately cuts through dirt, rust and scale to get into parts that have been frozen by or encrusted with corrosion and oxidation. It leaves protective shield-like film, and seals out water to prevent moisture and corrosion. ShuR-BusT will not ignite and will not dry or harden. It penetrates through water when sprayed on boat motors and submerged parts.

Castrol Industrial North America Inc.
Downers Grove, IL 60515
Aug 16, 2002 Molub-Alloy® 6040 greases are formulated with petroleum base oils using calcium-complex sulfonate thickener. They are compounded with additives for extreme pressure characteristics and thin-film, high-pressure, antiwear protection. Greases resist corrosion, making them suitable for aggressive process water environments. Resistance to oxidation allows them to remain pliable and prevents corrosive activity toward bearings and other lubricated components.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
Jul 30, 2002 Nevastane® formulas include lube, hydraulic, and compressor oils offered in synthetic, semi-synthetic, mineral base, emulsifiable, semi-fluid, grease, and spray formulations. Used to lubricate or to act as anti-rust film on equipment and machine parts, all formulas are NSF and USDA registered H-1 for incidental contact with food. Also available: Wet Lube 100 emulsifiable lubricant, Nevastane Flush Oil, and Nevastane 6 multi-purpose, white food machinery oil.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 10, 2002 Marine Grade Anti-Seize Lubricant protects assemblies exposed to high humidity conditions or direct contact with fresh or salt water. It reduces wear and protects against galling and corrosion in high-pressure applications, and resists wash-out from water spray. Lubricant is ideal for variety of fasteners and joints, or as dressing for water pump gaskets and flanges in marine and other applications that require submerging.

Dow Corning Corp.
Midland, MI 48686 0994
Jun 24, 2002 Molykote® Compressor and Vacuum Pump Fluids are comprised of formulations of synthetic polyalpha olefin (PAO), polyalkylene glycol/polyolester (PAG/POE), polyolester (POE), diester (DE), and ultra high-purity mineral oils. Their engineered chemistry makes them resistant to oxidation and emulsification. Molykote oils are available in pour points down to -80°F, with range of viscosity grades from 32 to 100 ISO, and service life up to 10,000 hours.

Spraymation, Inc.
Fort Lauderdale, FL 33309-6314
Jun 04, 2002 Electromatic XVI Mid Size Applicator Head operates at pressures up to 2,000 psi, and typically fires above 1800 cycles per minute. Internal 24 Vdc or 120 Vdc solenoid coil eliminates need for additional valves, and may be operated by PLC. All wetted parts are stainless steel, with only one moving part and no seals or packings to wear. Applicator head is intended for use with cold adhesives, coatings, silicones, marking inks, water, and lubricants.

Kano Laboratories, Inc.
Nashville, TN 37210
May 30, 2002 Kroil chemical lubricant can creep into millionth in. spaces, dissolving grease and carbon, breaking bonds of rust, and supplying necessary lubrication to loosen frozen metal parts. It is available in 1, 5, 15, and 55 gal sizes. Aerokroil aerosol version offers same lubricating powers and is available in 10 and 13 oz cans.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
May 24, 2002 PolyPerformance(TM) NLGI Grade 2 grease can be used in temperatures from -10 to +325 deg F, making it suitable for electric motor bearings in steel mills, furnaces, crushers, conveyors, automotive, railroad, and marine equipment applications. It contains inhibitors for rust and oxidation, and resists water and salt water washout, age hardening, throw off, and breakdown. Grease is rated NSF/USDA, H-2 and is available in cartridges, pails, kegs, and drums.