Mack Corp.
Flagstaff, AZ 86004
May 19, 2003 Miniature rams, suited for use with standard grease guns as source of pressure, offer ratings from ½â€“4 tons and strokes of 1 in. Products may serve as solution for occasional applications requiring large linear force in small, portable package. Grease used in typical application may be recycled and reused for environmental and economic purposes by using recovery valve.

WD-40 Co.
San Diego, CA 92138
Apr 25, 2003 Consisting of 4 products, 3-IN-ONE Professional Line suits lubrication needs of various trade professionals and includes petroleum-based High-performance Penetrant Spray and High-performance Drip Penetrant. Quick-drying Silicone Spray Lubricant has synthetic, no-mess formula that resists high temperatures and works in wet environments. Non-drip, heavy-duty, water- and heat-resistant White Lithium Grease lubricates and prevents rust and corrosion.

LPS Laboratories Inc.
Tucker, GA 30084
Apr 25, 2003 General-purpose lubricant is NSF H1 registered for use in meat and poultry plants. It penetrates to loosen rusted nuts and bolts and meets FDA regulations 21-CFR-178.3570 for incidental food contact. Oil contains no silicone or chlorinated solvents and is safe to use on metal, wood, and plastic surfaces. Available in 11 oz aerosol cans, product has 175°F flash point, specific gravity of 0.825 @ 77°F, and 15 to 300°F temperature range.

Alemite Corporation
Charlotte, NC 28226 3515
Apr 22, 2003 Model 575 cordless grease gun features flow rate of 5.25 oz/min at 1,000 psi and max delivery pressure of 6,500 psi. It is powered by 12 Vdc motor and includes chrome-plated barrel with Automatic Universal Follower. Loading options include 14 oz cartridge, 16 oz bulk, or suction loading. Standard 3 ft hose ends with industrial grease coupler and is rated to 8,000 psi working pressure. Gun uses single rechargeable NiCd battery and is provided with 1 hr charger.

Mobil Branded Lubricants, Exxon Mobil Corp.
Fairfax, VA 22037
Apr 08, 2003 Mobilgard M Series Lubricants, consisting of M330, M430, M340, M440, and M50, meet challenges of medium-speed diesel engines operating on lower-quality residual fuel. They provide piston undercrown control, lube-fuel compatibility, and overall cleanliness.

Mobil Branded Lubricants, Exxon Mobil Corp.
Fairfax, VA 22037
Apr 08, 2003 Mobil Drive Clean Plus 10W-30 and 10W-40 High Mileage Formulas clean away deposits and sludge build-up, and condition seals to prevent leaks. They reduce oil consumption, protect worn engine parts, and help restore engine performance. Mobil Drive Clean Plus 5W-30 Newer Vehicle Formula provides protection against oil thickening and prevents deposit formation to keep engine cleaner longer. Oils meet industry standards set by American Petroleum Institute.

Master Chemical Corporation
Perrysburg, OH 43552
Apr 03, 2003 Semisynthetic TRIM® SC285 cutting and grinding fluid concentrate is for extreme-pressure lubrication in drilling, tapping, reaming, and form-grinding operations. Product leaves synthetic-oil film that protects ferrous and nonferrous metal parts. It is safe for steel alloys, cast iron, and copper alloys. Lubricant does not contain chlorine or sulfur-based EP additives, DEA, nitrides, phenolic compounds, or formaldehyde releasers.

Morgan Advanced Ceramics
New Bedford, MA 02745
Apr 02, 2003 E/M® Air-Dry Solid Film Lubricants exhibit similar properties of thermally-cured lubricants, while providing flexibility to be field-applied to variety of substrates. Offering thermal stability and corrosion resistance, many are qualified to military and OEM specifications, such as MIL-PRF-46147C and MIL-L-23398. They come in quarts, gallons, 5-gallon pails, and 12-oz aerosol cans. Aerosol lubricants are ready to use, without need to add solvent.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
Mar 28, 2003 Nevastane SL Series consists of food-grade lubricants made with synthetic hydrocarbon base stocks and additives. They protect under high loads at high temperatures, while also maintaining fluidity at low temperatures. Lubricants offer anti-wear protection, rust and oxidation protection, and anti-foam properties. All viscosities are compatible with elastomers and seals. ISO viscosities of 32, 46, 68, 100, 150, 220, 320, and 460 are available.

Dow Corning Corp.
Midland, MI 48686 0994
Mar 21, 2003 Molykote® Chain Oils use synthetic-based formulations that provide resistance to oxidation and emulsification. Tackifier prevents dripping and/or oil throw-off from spinning chains. Molykote L-1460FG blends polyalpha olefin synthetic oil and ultra-high purity mineral oils for high wash-down applications at room temperature. Molykote L-1468FG neat PAO has pour point of -60°F and is suited for chain applications in blast freezers below 0°F.

Southwestern Petroleum Corp.
Fort Worth, TX 76161 0005
Mar 07, 2003 SWEPCO 121 Tri-Plex Universal Grease provides long life and wide application range. It is based upon Tri-Plex chemistry, combined with polymer modification for tight molecular structure. Tri-Plex chemistry significantly inreases service life, shear resistance, shock and impact resistance, extreme pressure capabilities, and water and high-temperature resistance.

DuPont Krytox Performance Lubricants
Wilmington, DE 19880
Mar 06, 2003 DuPontâ„¢ Krytox® L linear, perfluorinated oils and greases allow for performance from -100 to +599°F in various applications. Products are available with XP thermally stable, soluble, anti-wear, anti-corrosion additive, which forms protective coating on metal surfaces for reduced wear, fretting, corrosion, and torque. Polymer chains are completely saturated and contain only carbon, oxygen, and fluorine.

Zebra Skimmers
Solon, OH 44139
Feb 26, 2003 Zebra Auto-Fill Stationâ„¢ mixes and meters metalworking coolants and saves labor by automating tank-fill operations. Standard features include high and low-level alarms, and triple backup systems for overfill protection. Other options include automated alarm systems, remote reporting, remote controls, and level adjustments. Station includes solenoid-driven water valve, water-driven proportioning pump, mixing tube, control box, and slosh-resistant sensors.

Lincoln
St. Louis, MO 63120 1578
Jan 15, 2003 Model 1134 features jam-proof handle return mechanism and single-piece head casting. Comfortable design and pivot angle help to reduce user fatigue. Variable stroke delivers high pressure and high volume. Flip Over follower eliminates grease bypass, while heavy follower spring ensures positive priming and uninterrupted pumping action. Gun includes 18 in. flexible hose with coupler, rigid 4 in. tube, and filler nipple/bleeder valve combination.

Dylon Industries, Inc.
Cleveland, OH 44144 1045
Jan 10, 2003 Heavy-duty, water-based Grade FW-3382 forges warm or hot ferrous metals and is suitable for use on jobs that involve upsetting or extrusion. Product can be used on dies with temperatures from 225–600°F and does not build up. Synthetic dilutes with water, including hard water; dilution ratios are typically 10:1 or greater.

ITW Fluid Products Group
Glenview, IL 60025
Jan 08, 2003 Accu-Lube® #10 Perfect Tapping Oil consists of heavy-duty paste with lubricating properties. Natural based oil, suited for use in tapping and drilling operations, allows users to tap and drill several holes before recoating is required. Product does not need to be diluted with any other material and may be used with all metals. Pink, viscous oil is biodegradable and does not cause contamination or discoloration of products.

Trico Mfg. Corp.
Pewaukee, WI 53072 3954
Jan 07, 2003 Automatic grease dispensers deliver precise amount of grease to critical machine parts while machinery is running. Units provide variable feed rates lasting from 1–12 months and feed up to 6 lubrication points. Dispensers provide precise metering of lubricant in remote areas up to 30 ft and are equipped with electro-chemical or electro-mechanical drives.

PAC Petroleum Analyzer Company L.P.
Pasadena, TX 77503
Dec 27, 2002 Model NCK2 5G complies with CEC, ASTM, and IP methods. It features monoblock design and fume-free operation. Smart assistance features automatically alert operator if any test device is not properly set. Instrument tracks sample temperature and vacuum throughout test's duration, providing digital display of each and recording values to memory. Extended local memory capacity, graphic printer connection and PC link enable flexible results management.

Anderol Company
East Hanover, NJ 07936
Dec 16, 2002 Biodegradable, synthetic ANDEROL BDC-46 lubricant passes ASTM D 5864 test rating while eliminating carbon and varnish build-up. Friction and wear are reduced via product's film strength and adhesion to metal. Made from base stock used in jet engines, oil includes additive technology that prevents corrosion, enhances water-separation, and minimizes lubricant contamination. It suits oil-flooded rotary screw and vane compressors as well as axial and centrifugal compressors.

Lincoln
St. Louis, MO 63120 1578
Dec 12, 2002 PowerLuber Models 1242 and 1244 are 12 V cordless grease guns featuring pressure relief valve that allows grease to escape in thin strand when blocked fitting is encountered, alerting operator that fitting is not accepting grease. Valve also prevents guns from accidental overload. Both models have CE-approved assemblies and wiring design. Battery clips ensure that battery remains secure in harsh conditions.