Lumax Lubrication
Fort Mill, SC 29715
Feb 11, 2005 SuperLuberâ„¢ features variable electronic speed control trigger switch with electric brake, which enables motor to stop instantly. Since grease output can be controlled by pressure applied to micro-chip trigger switch, there is minimal waste and no mess. This feature also allows user to maintain output pressure at constant 6,000 psi. Precisely configured mechanism provides smooth power transmission, while ergonomic design minimizes user fatigue.

Dow Corning Corp.
Midland, MI 48686 0994
Feb 01, 2005 Composed of perfluoro polyether, NSF-H1 approved Molykote® HP-300 and HP-500 are stable in presence of chemicals, and insoluble in solvents and oils, with exception of fluorinated solvents. With temperature range of -65 to 250°C, greases are noncombustible with no danger of ignition. Due to chemically inert base, they have virtually no effect on plastics and rubbers. Applications include bearings, gears, chains, and sliding mechanisms in harsh conditions.

ITW Rocol North America
Glenview, IL 60025
Jan 21, 2005 Cosmetic-grade Rustlick EDM-500 offers combination of high dielectric strength and low power factor. It contains highly refined and purified non-hazardous chemicals that virtually eliminate skin irritation. It is odorless, transparent, and resists thermal degradation from high-amperage applications. Rustlick® EDM-500 can be used with all types of filters and is suited for use on all ferrous metals, aluminum, brass, bronze, and copper.

Lubrication Engineers, Inc.
Fort Worth, TX 76111 0128
Jan 20, 2005 Suited for industrial and automotive applications, 9919 SYNOLEC® All-Climate Gear Lubricant is made with 100% synthetic base fluid and contains MONOLEC® and extreme pressure (EP) wear reducing additives. True SAE 75W-90 grade lubricant does not use viscosity index improvers to achieve multi-grade characteristics. It has pour point of -60°F for optimal subzero weather flow capabilities. Product meets requirements for MIL-PRF-2105E, SAE J-306, and SAE J-2360.

EFD Inc.
East Providence, RI 02914-1342
Dec 21, 2004 Benchtop Model 2400 uses air regulator and microprocessor-controlled timer to make uniform dots and neat beads, or fill cavities with consistent amounts of grease. Amount of grease applied is determined by air pressure, tip size, and dispense time. Rated at 0–100 psi, regulator handles viscosities from light lubricants to thick grease. Dispense time can be adjusted in .1, .01, .001, or .0001 sec increments for precise control of deposit size.

Master Chemical Corporation
Perrysburg, OH 43552
Nov 26, 2004 TRIM® VHP® E810 delivers boundary and EP lubricity without chlorine or sulfur. Low-foam product keeps machine clean while wetting chips and tools to insure corrosion prevention. Environmentally-friendly, chemical emulsion or soluble oil coolant is suited for horizonal and vertical machining centers equipped with high-pressure, through-the-tool coolant delivery systems, as well as centerless, cylindrical, and creep feed grinding of ferrous and nonferrous metals.

OK Enterprises, Inc.
Carthage, MS 39051
Nov 19, 2004 Corrosion-killing super lubricant X-19A stops and/or prevents corrosion from exposure to air, moisture, salt, chemicals, or friction. With four types of carriers, it will stay where applied. Product is available in 11 oz spray can or in 1, 5, or 55 gal bulk containers.

Timken Co., The
Canton, OH 44706 0932
Nov 18, 2004 Ultra-high speed spindle grease is suited for bearings in machine tools that experience high speeds and extreme temperatures. Semi-synthetic food safe grease protects against hot and cold temperatures, moderate-high speeds, medium loads, and incidental food contact. Synthetic industrial grease is intended for extreme temperatures, severe loads, corrosive and slow-moderate speed environments. Multi-use lithium grease is suited for moderate speeds, temperature, and water, and light-moderate loads.

Master Chemical Corporation
Perrysburg, OH 43552
Nov 09, 2004 Designed for CNC machine tools that utilize through-the-tool coolant systems, TRIM® E917 has stable formula and predictable performance which provide proper balance of cooling and lubrication. Fine particle size emulsion reduces carryoff and helps fluid get to point of cut. Water-soluble product protects machine and tool surfaces while preventing sticky ways and fixtures. Low-mist and low-foam properties suit high-pressure, high-volume coolant systems.

Alemite Corporation
Charlotte, NC 28226 3515
Oct 21, 2004 Cordless model 585 can develop 10,000 psi for unclogging problem fittings. It incorporates 14.4 V motor with thermal protector and optimized airflow for extended motor life. Ergonomic design, balanced feel, and optional carrying strap facilitate lubrication process and reduce physical strain on operator. Unit comes with flexible, 3 ft long hose, which aids in lubricating stubborn parts.

ITW Rocol North America
Glenview, IL 60025
Oct 15, 2004 Featured in 13 oz packaging, natural-based Accu-Lube® Stick helps minimize heat build-up in belt, disc, or wheel grinding operations. It does not need to be diluted with any other material, is safe for all types of metals, and does not cause contamination or discoloration of products. Since lubricant is biodegradable, non-toxic, and naturally consumed in process, need for clean-up and disposal are eliminated.

Hirschmann Engineering USA, Inc.
Elgin, IL 60123
Oct 05, 2004 SintoGrind TTS is formulated from synthetically produced poly-alpha-olefin based fluid, which provides unlimited life span if properly filtered. Lubricity lends to extended wheel life and minimal heat build-up in workpiece as well as production quality of surface finishes and elimination of surface cracks. Product has no hazardous elements and exhibits stable viscosity at different temperatures.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
Sep 08, 2004 Kilfrost® provides needed lubrication to air tools, absorbs air line moisture, and lowers tool's freezing point. Fluid maintains tight grip on working surfaces, reducing lubricant consumption and lubricating cycles. Able to lock-up moisture, product prevents equipment corrosion year-round in wet or humid conditions and is also useful in underground operations. Semi-synthetic formula is non-toxic, non-flammable, and non-corrosive.

Exxon Mobil Corporation
Fairfax, VA 22037
Aug 20, 2004 Formulated with proprietary thickener technology, Polyrex® EM Grease offers mechanical shear stability, rust inhibition, and deposit control. It offers protection even under demanding conditions such as high temperatures and speeds. Available in NLGI Grade 2, Polyrex EM is suited for electric motor bearings and ball- or lightly loaded roller-bearings.

Exxon Mobil Corporation
Fairfax, VA 22037
Jul 15, 2004 Intended for rotary-screw and vane air compressors, fully synthetic, Mobil Rarus SHCâ„¢ 1025 is formulated with additives and wax-free hydrocarbon fluids. ISO viscosity grade 46 lubricant delivers resistance to oxidation and thermal degradation, helping to cut down sludge formation, varnish deposits, and wear on compressor components.

Dylon Industries, Inc.
Cleveland, OH 44144 1045
Jul 09, 2004 Designed for forging warm or hot ferrous, super alloy, and powdered-metal parts, heavy-duty, water-based Dyforge 312 contains micro-fine graphite and proprietary binder additive package. It can wet dies that range in temperature from 150 to 1,300°F and provides anti-solder properties. Lubricant, effective in concentrated version and as dilution, helps extend die life, resulting in decreased downtime and reduced scrap rates.

WD-40 Co.
San Diego, CA 92138
Jun 03, 2004 Professional 3-IN-ONE Line includes High-Performance Lubricant Spray with PTFE, which extends life of tools and machinery by reducing friction and wear. Synthetic formula provides protection against corrosion under extreme temperature, pressure, and motion. Citrus-based Heavy-Duty Cleaner Degreaser attacks and dissolves grease to make equipment work like new. Advanced Engine Starter and Conditioner features non-ether formula that quickly starts and lubricates gas and diesel engines.

Trico Mfg. Corp.
Pewaukee, WI 53072 3954
May 28, 2004 Streamliner V applies precise flow of grease to critical machine parts. It comes pre-filled in 250 cc reservoir and has variable feed rates of 1, 2, 3, 6, and 12 months with auto purge cut-out. Unit contains electro-chemical drive that produces inert gas, nitrogen, for operation. Unit can be deactivated and adjusted as necessary.

Radiator Specialty Co.
Charlotte, NC 28234
May 04, 2004 Liquid Wrench® includes Cerflon® ceramic-reinforced, chemical-resistant fluoropolymer to provide lubricity and wear resistance. Incorporated dispersion combines polytetrafluoroethylene (PTFE) with boron nitride. Normalized results from Ball on Cylinder Lubricity Evaluator show that base oil provided lubricity of 100; 111 with boron nitride; 119 with PTFE; and 127 with PTFE and boron nitride. Solids level for tests was 1%.

Diversified Brands, A Sherwin-Williams Business Group
Solon, OH 44139
Apr 28, 2004 Sprayon® 711 Liqui-Solâ„¢ packaging features reusable spray trigger with adjustable spray dial that enables fan spray to pin stream. Sprayon 711 penetrates, lubricates, demoisturizes, and inhibits corrosion while offering dielectric strength of 47,000 volts. NSF approved and H2 rated, Sprayon 711 meets requirements of MIL-C-23411 and Naval Ordinance Systems Weapons Specs WS-14138. Product suited for use on bearings, machinery, electrical wiring, and connectors.