Dylon Industries, Inc.
Cleveland, OH 44144 1045
Aug 17, 2005 Water-based, synthetic ferrous forging lubricant, Grade FW-3857, provides lubricious coating on dies that are normally in 170–500°F range. It dilutes with water, with ratios dependent upon severity of job. Lubricant does not produce fumes or gases associated with other synthetic or non-synthetic lubricants. Best results are obtained when Grade FW-3857 is sprayed by conventional methods.

T & L Specialty Company, Inc.
Tupelo, MS 38803
Aug 09, 2005 Developed for use in machine shops and industrial metalworking facilities, Shur Cool® 4055 is formulated to provide corrosion control, rust protection, and lubricity, all while naturally inhibiting microbial growth. Heavy-duty, semi-synthetic metalworking fluid enables machining centers to do without tankside biocide systems and their resultant odors, dermal irritation, and associated labor.

FS-Elliott Co., LLC
Jeannette, PA 15644-1482
Jul 29, 2005 Corona Turbo Blueâ„¢ is a synthetic and petroleum-based blend with life expectancy of 16,000 hr, while Corona Turbo Clearâ„¢ pure synthetic lubricant is made from polyalphaolefin base stock and is expected to last up to 24,000 hr. Minimizing sludge build-up, both include rust and corrosion inhibitors, oxidation control agents, and anti-wear compounds. Corona Turbo Cleanâ„¢ flushes lubrication system prior to conversion from another type of lubricant.

Cortec Corp.
St. Paul, MN 55110
Jul 27, 2005 VpCIâ„¢ Super Penetrant breaks through ½ in. rust in 30 min, displacing moisture and water, and lubricating metal so frozen parts can move freely. Product forms ultra thin film on metal that offers up to 3 months of protection against re-rusting and further corrosive attack. Suited for indoor and outdoor uses, penetrant can be applied by brush, squirt, hand pump spray, aerosol, and spray gun. Applications include chains, hinges, linkages, and nuts.

WD-40 Co.
San Diego, CA 92138
Jul 27, 2005 WD-40® Smart Straw sprays as stream through permanently attached straw for hard-to-reach jobs, or when straw is folded down, via wide-area sprayer to cover large surface area. Product comes in 12-pack cases, 40-count floor stands, and 150-count half-stacks.

Blaser Swisslube Inc.
Goshen, NY 10924
Jul 22, 2005 Vascomill 22 provides lubrication of CNC machinery for metal removal operations from low to high cutting speeds. Derived from renewable raw materials, oil has high flashpoint for viscosity, and generates minimal mist, vapor or smoke. Suitable for Swiss-automatic lathes, oil can be used in machining stainless steel, titanium, high temperature alloys, beryllium copper and in medical industry applications.

ITW Rocol North America
Glenview, IL 60025
Jul 19, 2005 Accu-Lube® 9045 attaches to 3-pump Accu-Lube® applicator system and applies smooth coat of lubricant directly to cutting edge and on both sides of saw blade. Nozzle mixes lubricant and air right at nozzle, so there is no lag time and no dry cutting. Mounting block facilitates installation, blade changes, and alignment.

HASCO Hasenclever GmbH + Co KG
Lüdenscheid D-58513  Germany
Jul 15, 2005 Supplied in 40 g, 1 kg tin, and 10 kg bucket, A 7002/... provides conservative lubrication to help extend service life of Z 412 plasmanitrided ejector pins as well as all moving parts. Drip point is over 175°C, and mold temperature processing is 1,400°C. Grease should be applied thinly to moving surface.

Dylon Industries, Inc.
Cleveland, OH 44144 1045
Jul 15, 2005 Suited for industrial bearings, Grade GR-650 features ashless synthetic base stock that provides thin film lubrication and maintains grease structure at temperatures of 650–700°F. Barrier film strength fights excessive friction and wear at high speed, heavy load, and in high-temperature service. Added chemistry built into GR-650 provides protection that is needed if grease cycle is missed. Grease comes in tubes, 5 gal pails, 120 lb kegs, and 400 lb drums.

Anderol Company
East Hanover, NJ 07936
Jun 24, 2005 ANDEROL® 3832 exhibits anti-wear properties, high temperature oxidation, rust protection, and corrosion inhibition. Engineered for performance in freezing climates, lubricant minimizes cold weather start up torque and lowers power consumption through low temperature fluidity.

Federal Process Corp.
Cleveland, OH 44128
Jun 23, 2005 Free All® Deep Penetrating Oil features silicone-free formula that quickly dissolves rust and corrosion, eliminating need for torching, drilling, hammering, and chiseling to free virtually any frozen fastener or part. Suitable for auto, home, and marine uses, Free All will not damage painted surfaces, and is available in 12-, 6-, and 2-ounce spray cans and ½ oz single-use bottles.

Blaser Swisslube Inc.
Goshen, NY 10924
Jun 23, 2005 Developed for machining and grinding of ferrous and non-ferrous materials, mineral oil based BC20SW micro emulsion is suited for heavy duty or difficult operations. Biological concept eliminates need for tank side additives or biocides, and fluid provides foam control in soft water that contains less than 180 ppm calcium.

Milacron Inc.
Cincinnati, OH 45206
Jun 21, 2005 QUANTALUBE® 270 XL consists of water-based metalworking fluid designed to improve part quality in grinding applications. Helping to extend wheel life, fluid offers antiweld and antiwear properties as well as ability to remove heat and swarf from cutting area. Material removal process combines roughing and finishing while removing stock to precision limits. Product performs similarly to straight oils, without being messy, hard to remove, or a fire hazard.

Jet-Lube, Inc.
Houston, TX 77028 5811
Jun 21, 2005 EZ-TURN® valve sealants, EZY-PAK® injection packing, and EZY-OPEN® penetrants meet or exceed requirements for applications from geothermal wellheads to chemical processing. Peanut butter type body fillers and synthetic varieties are suited for expanding and slab gate valves. EZ-TURN® sealants are suited for ball and tapered and cylindrical plug valves. Available in gel or liquid, EZY-OPENâ„¢ is formulated as flush to penetrate and scale rust and oxidized valve fillers and lubricants.

Falk Corporation
Milwaukee, WI 53208
May 27, 2005 Offering thermal and oxidation stability, GMax 6000 enables users to extend operating life of enclosed gear drives up to 15,000 hours between changes. In addition, temperature capability of -30 to +235°F can eliminate seasonal lubricant changes due to climate. GMax 6000 is also available as factory fill option on all gear drives.

Anderol Company
East Hanover, NJ 07936
May 12, 2005 AOSynâ„¢ DE diester-based lubricants, formulated for oxidative resistance and minimal hydrocarbon deposit formation, incorporate ester basestock and additive technology to decrease risk of compressor detonation. With operating range of -40 to +210ºC, series minimizes power consumption through lubricity and is available in ISO viscosity grades 32, 46, 68, 100, and 150. IT may be used on screw, vane, axial, centrifugal, and reciprocating compressors.

Dow Corning Corp.
Midland, MI 48686 0994
May 04, 2005 Dow Corning® 111 heavy-consistency, dimethyl silicone compound maintains serviceable consistency from -70 to +400°F. Acceptable as release agent under FDA 21 CFR 175.300, it carries NSF 51 and NSF 61 approvals. Product can be used as lubricant for rubber and plastic O-rings, water softener and faucet valves, and electronic and ignition systems. It may also be used as sealant in transformer gaskets, equipment enclosures, and equipment subject to harsh environments.

Anderol Company
East Hanover, NJ 07936
Apr 29, 2005 Polyolester-based Bio Guardâ„¢ FRHF series minimizes equipment wear and deposit formation in hydraulic systems. Ashless and silicon-free product meets industrial lubricant flammability specifications and is classified as biodegradable. Passing Vickers 35VQ 25A and Vickers 104C pump tests, fluid has fire point above 360ºC and Autogenous Ignition Temperature above 420ºC. Product offers low aquatic toxicity and comes in ISO viscosity grades of 46, 55, and 68.

Struktol Company Of America
Stow, OH 44224 0649
Apr 18, 2005 STRUKTOL® TPW 104 is designed for use in polyolefin compounds, whereas TPW 113 is designed for use in polyolefin-wood composites where formulation contains reactive chemical coupling agents. Suited for use in polyolefin and styrenic compounds, TPW 101 general-purpose lubricant blend improves pigment and filler dispersion and eliminates edge tearing. TPW 012 combines internal and external lubricants, providing optimal fusion characteristics for PVC composites.

AMSOIL, Inc.
Superior, WI 54880
Mar 11, 2005 AMSOIL Synthetic Tractor Hydraulic/Transmission Oil provides multi-viscosity, all-weather protection and enables equipment owners to avoid seasonal fluid change-outs. Incorporating oxidation inhibitors, formulation of synthetic base stocks and additives suppresses wet brake chatter and protects against rust and corrosion. Seal and hose conditioners reduce oil leaking and blown hoses, while premium additives enable use in final drives calling for UTTO.