Shell Lubricants
Houston, TX 77002
Jun 20, 2008 Reformulated to meet demands of heavy-duty turbine applications, Shell Turbo Oils CC combine oxidative stability and sludge control with deposit resistance that enables them to lubricate hottest gas turbine bearings with minimal deposit built-up. Formulated to meet demands of Mitsubishi Heavy Industry combined-cycle gas and steam turbines, Shell Turbo Oil J offers water-separation characteristics that protect against corrosion and other damaging effects of water circulating in system.

Kimball Midwest
Columbus, OH 43228
Jun 17, 2008 Suited for drilling, taping, saving, sawing, milling, threading, engraving, and punch press work, Hard-Kut Hi-Performance Metal-Working Lubricant can be applied to stainless steel, heat treated steel, cast iron, nickel-chromium steel, aluminum, monel, and range of other hard metals. Multifunctional lubricant contains no hazardous ingredients, stays where it is applied even in vertical and overhead situations, and can be thinned with water as needed.

Krylon Products Group
Cleveland, OH 44115
Jun 04, 2008 NSF-registered and P1-rated, Sprayon® Belt Dressing contains no asphalt or rosin, and will not glaze or collect dirt/dust. It is used to condition and increase pulling power of leather, rubber, canvas, fabric, flat round or V belts; auto fan belts; farm machinery belting; and all industrial belt drivers. Equipped with SPRAY ANYWAY(TM) valve, product can be applied directly to belts and sheaves of V belts while in use.

Kluber Lubrication North America L.P.
Londonderry, NH 03053
May 21, 2008 Composed of synthetic base oil and calcium sulphonate complex thickener, Millplex FMG-2 US lubricates machine rolling bearings in food and pharmaceutical manufacturing plants. Load-carrying properties, as well as wear and corrosion protection characteristics, help extend bearing life and reduce downtime. Applied using standard grease equipment, product is specifically suited for use in manufacturing grain, meal, and pellet animal feeds that may come in contact with grease.

Henkel
Rocky Hill, CT 06067
May 21, 2008 Loctite® Freeze & Release shock-freezes metal parts, allowing lubricating oils to penetrate into rust layers. Available in 400 mL aerosol can, low viscosity lubricant instantly freezes seized and rusted parts to -45°F, which creates hairline cracks in rust layer as metal contracts. Cracks enable lubricating oil to penetrate by capillary action into rust layer. After 1-2 minutes, assembly can be dismantled.

Shell Lubricants
Houston, TX 77002
May 21, 2008 Mineral oil-based, zinc-free Shell Delima S Oils are designed to accommodate speed and technical performance required in paper-making machinery. Circulating oils allow for free movement of surfaces, prevent corrosion, and cool system to prevent wear in lubricated parts of paper machine. Used in manual, ring, collar, or rolling bearings of paper machine dry end, oils effectively disperse contaminants while providing water separation in reservoirs.

Shell Lubricants
Houston, TX 77002
May 19, 2008 Designed to meet or exceed API CJ-4 specifications, Rotella® T Synthetic 5W-40 Motor Oil offers wear protection, soot control, deposit control, heat resistance, and protection in extreme climates. Product is compatible with exhaust after-treatment devices such as diesel particulate filters found on heavy-duty trucks. Low-ash formulation helps control rate of DPF blockage and potentially extends DPF maintenance intervals.

Henkel Loctite Corporation
Rocky Hill, CT 06067
May 15, 2008 Loctite® Freeze & Release is low-viscosity, spray-on lubricant designed to shock-freeze metal parts, allowing lubricating oils to penetrate into rust layers. It freezes seized and rusted parts to -45°F, which causes hairline cracks to form in rust layer as metal contracts, allowing lubricant to penetrate by capillary action. Threaded assemblies can be dismantled in 1-2 min and product is available in 400 ml aerosol can.

Graco Inc.
Minneapolis, MN 55440
Apr 01, 2008 Designed to safely operate off of onboard low-pressure hydraulics, Dyna-Star® 10:1 pumps deliver lubrication via divider valves and injectors to bearing points on heavy-duty construction and mining equipment. Digital controller offers multifunctional time- and pressure-based control of pump as well as low-level and inadequate pressure shutdown options made possible via integrated pressure switch, tank level indicator, hydraulic pressure output gage.

Metallized Carbon Corp.
Ossining, NY 10562
Mar 25, 2008 Consisting of carbon/graphite Antimony impregnated materials, Metcar grades M-343 and M-346 operate in difficult environments where oil and grease lubrication cannot be used due to temperature limitations. Products are designed for medium to high loads and are suited for bearings and thrust washers in both dry and submerged environments. Offering lubricating qualities and wear resistance, materials are completely homogenous and provide continuous lubrication.

Michigan Manufacturing Service, Inc.
Wixom, MI 48393
Mar 20, 2008 Suited for metalworking and metalforming operations, Jet Pack Automotive Lubrication System automatically sends low-pressure spray of high-viscosity lubricant to required areas. Control system timer regulates duration of spray for each machine cycle, while controlled air logic ensures clean, fogless application, and quick disconnect design speeds nozzle changeover. Virtually maintenance free, Air Assist helps optimize tool life and minimize lubricant usage.

ITW Rocol North America
Glenview, IL 60025
Mar 04, 2008 Featuring natural, environmentally safe formulation, Accu-Lube LB4600 provides lubricity required for sawing and machining of aluminum in near-dry (MQL) machining operations. Non-toxic and biodegradable product, recommended for non-ferrous machining processes, has additive-fortified and mineral oil-free base oil made from renewable vegetable resources. Non-staining and odorless, this purple lubricant can be burned off during post heat-treat processes.

JAMES DURRANS &SONS LTD
England   United Kingdom
Jan 16, 2008 Based on nano-structured formulations of aqueous dispersion of lubricants and release agents, Aqualub Lubricants are relatively smokeless and protect forging dies from scoring, sticking, and other deformation defects such as adiabatic strain banding. Lubricating film is continually renewed and reinforced with severity of work being done during forging process. Supplied in paste, slurry, or neat consistency, lubricants are free from ammonia, chlorine, and phosphates.

Chemetall
New Providence, NJ 07974
Jan 11, 2008 Formulated from blend of silicone and nonionic emulsifiers, Oakite® FiSan E-Z Glide Conveyor Lubricant can be used on stainless steel, glass, aluminum, and plastic conveyor lines. It contains ingredients accepted by U.S. Food and Drug Administration. Dispensed through automatic feed systems, synthetic, near-neutral lubricant also exhibits spill tolerance.

Master Chemical Corporation
Perrysburg, OH 43552
Dec 07, 2007 Meeting stringent nuclear and aerospace chemical content and machining requirements, TRIM® C350 is suited for machining and grinding of aircraft air frame and power plant parts/components. Using synthetic ester technology, synthetic coolant does not use conventional sulfur or chlorine based EP additives. Product's pH neutral and less than 100 ppm total chloride working solutions provide corrosion and stain resistance even on most sensitive alloys.

Aremco Products, Inc.
Valley Cottage, NY 10989
Nov 21, 2007 Suitable for heat transfer applications from -60 to +550°F, silver-filled Heat-Away(TM) 641 provides thermal conductivity of 5.58 W/m-K. Product is formulated as thick paste that will not flow after application. With stable viscosity over entire temperature range, grease optimizes thermal transfer between heaters and process vessels and various heat sinks used in heat exchangers and electrical and electronic applications.

Shell Lubricants
Houston, TX 77002
Nov 07, 2007 Shell Malleus® GL and Shell Malleus® OGM are water-repellent greases developed for lubrication and protection of open gears and wire ropes subject to extreme loads and temperatures. Both are Pb-free and contain extreme pressure chemistry as well as combination of solid additives to optimize load carrying capability. Shell Malleus GL is solvent-free, and Shell Malleus OGM includes solvent that promotes pumpability for extreme ambient climate conditions.

ITW Rocol North America
Glenview, IL 60025
Oct 31, 2007 Natural-/vegetable-based metalworking oil, Accu-Lube FG-2000, is suited for use in food and medical applications requiring machining, drilling, and tapping. It provides lubricity to cutting edge of any tool for sawing of solids up to 6 in. dia as well as tubing of any size. Consumed in cutting process, non-toxic and biodegradable product eliminates need for clean up, disposal, and flood coolant. It is safe for use on all metals and certified by NSF as safe for incidental food contact.

Milacron Inc.
Cincinnati, OH 45206
Oct 29, 2007 Designed to meet aerospace industry requirements, CIMTECH® 310 passes all bi-metallic and aluminum (7075) sandwich corrosion tests. Low-foaming, transparent product does not cause skin irritation and exhibits level of rancidity control that optimizes fluid life while minimizing need for additives. Areas of use include moderate- to heavy-duty machining and grinding operations, including creep feed grinding, on non-ferrous or ferrous metals.

Chemtura Corp.
Middlebury, CT 06749
Oct 26, 2007 Specifically designed for Asian market, AOSyn® GTP 46 is formulated with specialized additive package that utilizes Chemtura's Hatcol-brand polyester basestock as carrier fluid. Product offers thermal and oxidation stability, minimizing deposit formations. In addition to high viscosity and low volatility, lubricant possesses optimal demulsifying abilities and is compatible with conventional mineral-based compressor oils.