Valley Forge Composite Technologies, Inc.
Covington, KY 41011
Jul 25, 2008 LOKI system pinpoints locations and verifies nuclear explosions while monitoring radioactive fallout in airports, seaports, cargo terminals, and border crossings. By using photonuclear gamma ray technology, system penetrates shielding to identify nuclear material, narcotics, chemical and biological agents at molecular levels. Detection system meets CTBTO standards which monitors nuclear test ban treaty.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Jul 21, 2008 To help chromatographers accelerate method development times and remove monotonous tasks, 1200 Series Liquid Chromatography (LC) Method Development Solution combines LC instrumentation, columns, and application-specific software. Users can select up to 8 columns and 15 solvents via one click in column compartment and pump user interface. Solution offers up to 288 test conditions for binary gradient separation and 50+ LC modules for different detection modes.

FEI Company
Hillsboro, OR 97124
Jul 18, 2008 With optional environmental enclosure to isolate instrument from thermal and acoustic interferences, Magellan XHR SEM enables rapid 3D surface imaging at different angles and at resolutions below 1 nm. Magellan 400 is optimized for scientific research, while Magellan 400L is optimized for semiconductor labs. Magellan 400L has load-lock feature that speeds-up sample throughput, and includes retractable solid state backscatter electron detector and S2 compliance kit.

Ametek Chatillon, Test & Calibration Instruments Div.
Largo, FL 33773
Jul 17, 2008 Designed for TAPlus texture analyzer, Kramer Type Shear Cell can measure bulk shear and extrusion forces of meat, fruit, and cereals where samples have irregular shapes and sizes or forces are too high. It has 5 parallel steel blades, which are driven down through guide slots into rectangular container with corresponding slots in base. Operating from ambient temperature up to 100°C with maximum capacity of 225 lbf and minimum load cell of 22.5 lbf, unit is fitted with spill container.

Carl Zeiss Microimaging, Inc.
Thornwood, NY 10594-1939
Jul 11, 2008 Designed for routine applications in materials microscopy, Axio Scope.A1 includes 5 microscope upper bodies, 3 lower bodies, and 2 Vario columns which can be selected for respective requirements and combined into optimally customized microscope system. Sample area height can be continuously set up to 380 mm high, depending on configuration. Enabling C-DIC and PlasDIC techniques, unit offers 2-position sliders and 4- and 6-position reflector turrets as reflector modules.

Zaber Technologies Inc.
Richmond, BC V7E2J1
Jul 10, 2008 Available in 13 and 28 mm travel versions with metric or imperial mounting holes, Series T-LS can be controlled manually or through RS232 or USB port. Units can be used in X-Y or X-Y-Z configuration with AB90 angle brackets. Suitable as microscope stage, X-Y configuration, when combined with T-JOY3 Joystick Controller, allows manual control of X and Y axes from single interface and enables stage positions to be saved and recalled.

VEE GEE Scientific, Inc.
Kirkland, WA 98034
Jul 08, 2008 Suited for incubating diluted samples of clean water, wastewater, effluent water, and polluted water during 5-day biochemical oxygen demand (BOD) test, VEE GEE BOD bottles are available in packs of 6 and cases of 24. Meeting ASTM E-438 Type 1, Class A borosilicate glass specifications, bottles feature flared mouth to form water seal to prevent ingress of air during incubation, interchangeable pennyhead stoppers with tapered bottom, and permanent marking squares for flexible numbering.

Instrumentation Laboratory
Lexington, MA 02173
Jul 03, 2008 Featuring FDA clearance 510(k) for ACL TOP® software v3.0.0, ACL TOP 500 CTS is designed to meet testing needs of mid- to high-volume hemostasis laboratories. It combines speed, simplicity, and intelligence to meet varied needs of routine and specialty labs, while enabling true standardization across ACL TOP product line by using same reagents and consumables as other models.

FEI Company
Hillsboro, OR 97124
Jul 01, 2008 Able to select electron beam voltages anywhere between 80-300 kV, Titan(TM) 80-300 environmental transmission electron microscope (ETEM) allows researchers to see chemistry and nanoscale catalysis at atomic level. Microscope delivers high-resolution imaging with gas pressures in sample chamber as high as few percent of atmospheric pressure, and gas controller permits precise control of composition as well as pressure. Heating and cooling holders provide control over range of temperatures.

Detroit Precision Hommel
Rochester Hills, MI 48309
Jun 27, 2008 Able to measure roughness and contour of any shape in 1 pass, HOMMEL nanoscan can measure surfaces with stroke of 24 mm with resolution of 0.68 nm. Laser interferometer features resolution of 0.6 nm, allowing surface structures from submicrometer range to 24 or 48 mm to be recorded. CNC-controlled horizontal and vertical axes include digital scales providing resolution of 10 nm and probe arms are magnetically coupled on traverse unit to simplify handling, operation, and safety.

Thermo Fisher Scientific
Waltham, MA 02454
Jun 27, 2008 ChromQuest v5.0 Chromatography Data System (CDS) software offers data acquisition, data processing, and reporting for Thermo Scientific LC and GC systems. It features multi-level calibrations, graphic method editing, conditional sequence actions, and automated LIMS export. Designed for multi-user and multi-instrument operations, CDS provides integrated instrument control as well as digital control for LC and GC products.

Ahram Biosystems, Inc.
Seoul 133-120  Korea (south)
Jun 27, 2008 Capable of delivering PCR amplified product in as little as 15 min, hand-held Palm PCR helps researchers perform conventional laboratory experiments more effectively. Amplification for all kinds of DNA samples, including human genome, is possible, and single copy of DNA can be amplified in as little as 25 min to amount sufficient for typical agarose-gel detection. Achieving uniformity better than ±0.1°C, unit can run for 4+ hr on one charge of its Li-ion battery.

VEE GEE Scientific, Inc.
Kirkland, WA 98034
Jun 26, 2008 Available in packs of 6 and cases of 24, BOD bottles are manufactured from borosilicate tubing and suited for incubating diluted samples of clean water, wastewater, effluent water, and polluted water during 5-day biochemical oxygen demand (BOD) test. Flared mouth forms water seal to prevent ingress of air during incubation, and interchangeable glass pennyhead stoppers have tapered bottom that also prevents air entrapment.

Biohit Inc.
Neptune, NJ 07753
Jun 24, 2008 Suited for applications across 0.1 µl to 10 mL volume range, Proline Plus pipettors are available in single-channel, multichannel, and fixed volume models. Manufactured as per IVD/CE directives, they can calibrated in lab. All models with nominal volume greater than 10 µl can utilize Biohit Safe-Cone filters. Multichannel units provide Biohit Optiload design feature for tip loading and ejection.

SWECO®, Div. of M-I L.L.C.
Florence, KY 41022
Jun 20, 2008 Developed for production of fine products from 150 microns down to 6 microns, ALPHA classifier is particularly suited for mineral and chemical dry powders. Depending on fineness required, it can be fed by gravity from top or in main airstream from below, and can be customized with stainless steel, ceramic, or polyurethane for wear protection and specific material requirements. Unit is offered with various options to meet range of air classification needs.

Teseq, Inc.
Edison, NJ 08837
Jun 20, 2008 In addition to modular architecture suited for basic and sophisticated test laboratories, multifunctional NSG 3060 incorporates interface with 7 in. color touch-screen that accelerates test procedure setup. Surge voltage up to 6.6 kV is provided for testing of combination wave, ring wave, EFT pulses as well as burst, dip/interrupt, and magnetic field applications. Master-slave concept lets new pulse generator modules be added to existing configuration and calibrated separately.

Physik Instrumente (PI)
Auburn, MA 01501
Jun 20, 2008 Compatible with various imaging acquisition packages, P-737 PIFOC® Piezo Z-Focusing Stage features up to 500 µm travel, nanometer precise motion under closed-loop control, and set of LabView drivers with analog control option. It allows for millisecond sample settling, enabling Z-stack imaging with multiple objectives. Designed for biotech research microscopes using deconvolution and 3D imaging, unit can be controlled through digital interfaces and analog signals via 0-10 V input.

Advanced Instruments, Inc.
Norwood, MA 02062
Jun 10, 2008 Offering alternative to anaerobic chambers and gas bags, Anoxomat Mark II creates repeatable environmental conditions, with gas mixture remaining consistent with 0.5% of desired values. Each cycle involves evacuation phase, followed by replacement using oxygen-free gas mixture. Built-in quality assurance system checks for leaks before incubation, checks whether catalyst is capable of achieving desired conditions, and warns of gas failure threat.

Thermo Fisher Scientific
Waltham, MA 02454
Jun 06, 2008 Leveraging mass analyzer technology from LTQ Orbitrap platform, Exactive can be used in analytical laboratories with routine toxicology, environmental, and drug development workflows. It delivers resolutions up to 100,000 and offers single scan mass accuracy in positive and negative modes. In addition to screening and confirming co-eluting compounds in complex matrices in one experiment, system is capable of screening isobaric compounds that differ by only a few milli-mass units.

PEDI - Plastics Engineering & Development, Inc.
Carlsbad, CA 92010
Jun 05, 2008 Meeting critical requirements for molded tray flatness and film clarity, 384-well pharmaceutical diagnostic tray is produced through customized film insert molding process in Class 100,000 cleanroom. Product accommodates human cells and pharmaceutical drugs in wells for research and development in biological testing.