Astrodyne Corp.
Mansfield, MA 02048
Jun 02, 2008 Featuring fully enclosed or fully enclosed with DIN Rail mounts, PMMK320 high density switching power supplies are approved for UL/EN60606-1 medical safety specifications, and provide 320 W output power with active Power Factor Correction. All models accept universal input from 90-264 Vac and 6 models provide single outputs from 5-48 Vdc. Delivering power densities of up to 6 W/cu in., units offer rugged aluminum enclosure with fan included and screw terminals for I/O connections.

Aqua-Nu Filtration Systems Ltd.
Dublin 3   Ireland
May 28, 2008 PURITYCAPSULE(TM) uses high flow rate ceramics which remove/kill potential disease-causing micro-organisms, including bacteria such as E. coli, Cryptosporidium, and cysts of Giardia - water-borne pathogens associated with gastro-intestinal diseases. Portable filter allows users to drink water from virtually any source. Eliminating need for continually purchasing plastic bottles of water, unit has ability to be fitted to used plastic water bottles and cold water taps.

Eppendorf North America, Inc
Westbury, NY 11590-0207
May 22, 2008 Vacufuge plus is designed for drying, concentration and purification of DNA, RNA, nucleotides or proteins. With fast evaporation and no sample loss, device features LCD display and control panel that improves handling while reducing evaporation times by allowing for solvent pre-selection as well as 4 heating levels for optimized drying speed. Vacuum is available with 13 fixed-angle rotors for different vessel sizes and capacities.

Sperian Hearing Protection, LLC
San Diego, CA 92154
May 20, 2008 Designed for use in intermittent and impact noise environments, Impact(TM) Sport sound amplification earmuffs feature electronics that automatically stop amplifying when ambient sound reaches 82 dB. Sounds below that level are picked up by built-in directional microphones and amplified. Baseplate chamber and non-woven layer manage airflow to control how sound reaches ear. Units operate for up to 350 hr on 2 AAA batteries and automatically shut off after 4 hr.

Alcan, Inc.
Montreal, QC H3A3G2
May 13, 2008 Optimizing shelf life of pharmaceuticals, StabilitySolutions(TM) DRY consists of bi-layer desiccant container for oral solid products. Technology incorporates desiccant material into product contact layer, eliminating need for desiccant sachet or canister. Also intended for oral solid dose products, tri-layer StabilitySolutions(TM) BARRIER container sandwiches ethylene vinyl alcohol between 2 layers of high-density polyethylene for oxygen and moisture protection.

Sperian Hearing Protection, LLC
San Diego, CA 92154
May 07, 2008 Compatible with Howard Leight® earmuffs and available in 2 sizes, balaclava-style Polar Hood(TM) provides protection in cold climates while ensuring optimal earmuff attenuation. Side panels eliminate any gaps between earcup and ear, forming tight acoustic seal. Seal around face prevents further exposure, and adjustable design includes front zipper for ventilation and foldaway visor. Slim Belt Clip provides handy storage when earmuffs are not in use.

Atlas Vac Machine Div., Planet Products Corp.
Cincinnati, OH 45242
May 02, 2008 Model 18:30S can provide over 10,000 lbf on large format (18 x 30 in.), Silverstone-coated sealing platen. In addition to PLC for temperature, dwell time, and pressure management, sealer includes standard secondary IR thermal sensing that provides packaging engineers with platen temperature information needed during validation. Optional Direct Force Sensing System provides reading of force (lbf) exerted by tray sealer press against seal tooling on every stroke.

Abbott Laboratories
Abbott Park, IL 60064
Apr 18, 2008 Designed for labs that typically perform less than 200 immunoassay tests per day, ARCHITECT® i1000SR® provides continuous access to reagents and samples while it is running. Unit can accommodate 65 patient samples and process up to 100 tests/hr. It is able to prioritize emergency test results and turn them around in less than 16 min. To facilitate training of new laboratory personnel, instrument features wide test menu and minimal maintenance needs.

Binder-USA
Camarillo, CA 93012
Apr 16, 2008 Designed for medical and industrial applications with limited space, Series 702 M9 molded connectors are manufactured with IP67 environmental protection and 360° EMI shielding. Molded with PUR material for protection from harsh environments, preassembled cordsets are designed to improve strain relief and are available in lengths of 2 and 5 m.

Nortech Laboratories, Inc.
Farmingdale, NY 11735
Apr 10, 2008 Designed to meet all cryotherapy and modality needs, InstaKool(TM) Instant Cold packs feature urea-based formulation. Cold packs exceed ANSI Requirements for Cold Packs 5.2.1.6 and ASTM Method D882 for Tensile Strength at Break for cold duration. Latex-free products are available in 3 sizes for different contours and uses.

Sperian Hearing Protection, LLC
San Diego, CA 92154
Apr 10, 2008 Providing hearing protection/visibility in electrical environments, Howard Leight® Thunder® T2HV Hi-Visibility Earmuffs feature reflective headband that illuminates when exposed to light and bright green earcups for noticeable contrast against dark settings, especially in low lighting situations and inclement weather. With dielectric construction, NRR 28-rated earmuffs will not conduct electricity, and utilize Air Flow Control(TM) technology to provide optimal attenuation across all frequencies.

Scapa North America
Windsor, CT 06095
Apr 02, 2008 Bioflex® Rx1073P-001 is made up of matte polyethylene film, single-coated with aggressive, biocompatible, medical-grade acrylic pressure sensitive adhesive (PSA). Suited for use as surgical tape and attaching medical devices to skin, product conforms to curved areas of body and is designed to reduce visibility of devices over which it is applied. Tape is supplied on white 60 lb kraft release liner that facilitates converting processes.

Data Display Products
El Segundo, CA 90245 4630
Mar 24, 2008 LED Lighting Assembly is low-profile LED light source that provides task lighting in surgical fluid and blanket warmer, keeping materials at consistent temperature. Able to withstand maximum ambient temperature of 200°F, LED assembly reduces fluid warmer's power consumption and enables thermal control by eliminating temperature spikes. System utilizes surface mount technology and can be designed for a wide range of applications.

Conversion Devices Inc.
Huntington Beach, CA 92649
Mar 20, 2008 Featuring 85-264 Vac input with active PFC, SMM201 delivers full-rated output of 200 W with 15 LFM of forced air and has convection rating of 150 W. Size of 5.0 x 3.0 x 1.39 in. makes power density 13.33 W/in.³, and safety ground leakage current is less than 140 µA @ 132 Vac input. Single-output model has main output with available voltages from 12-60 Vdc up to 200 W, while dual-output model has second output with voltages from 3.3-12 V and current rating to 5 A.

Tape O Corp.
Dover, NH 03820
Mar 19, 2008 Designed for use as compression wrap after blood and plasma collection, COHERE® non-woven cohesive bandage maintains consistent non-slip compression, yet is soft, flexible, and porous. It sticks only to itself and never leaves residue. Utilizing woven fabric, COTEAR(TM) tears by hand in both directions. Both come in latex-free and latex types. Individually wrapped rolls are 1, 1 ½, 2, 3, or 4 in. wide x 5 yards and available in assorted colors.

Smith & Nephew Dyonics, Inc.
Andover, MA 01810
Mar 18, 2008 Used by surgical staff, CAPTION(TM) system simplifies and expedites collection of platelet rich concentrate (PRC) while eliminating cross-contamination risks. Product concentrates platelets from patient's blood sample, creating PRC of up to 4X original level that can be applied to surgical site to help jumpstart body's natural healing response. System arrives sterile, and all materials are disposed of after use.

Magic Power Technology Inc.
Sunnyvale, CA 94085
Mar 17, 2008 Designed with universal input and active PFC, Model MPM-815H is ac/dc medical grade switching power supply that can generate 150 W at 50°C under convection cooling. It has ATX output option, and features power good/power fail signals, remote ON/OFF function, and short-circuit, over voltage, and thermal protection. Suited for no noise devices or systems placed near bedside in patient's room, unit fits within 1U height constraints.

Sonic Innovations, Inc.
Salt Lake City, UT 84121
Mar 13, 2008 Offering 24-channel digital signal processing, micro behind-the-ear ion(TM) 400 is designed for those with mild to moderately severe hearing loss. Voice alerts, which replace beep sequences, talk to user, verbally informing them when hearing aid is changing programs and when battery is low. Adaptive feedback cancellation system eliminates high-pitched squeal commonly associated with hearing aids. With moisture-resistant design, unit is suited for those with active lifestyles.

North Safety Products, Inc.
Cranston, RI 02920
Mar 12, 2008 Featuring mechanism that provides one ear plug at-a-time, single plug dispenser works with DeciDamp2 and Deci4200 Earplugs. Machine is available with bucket containing 500 pairs of ear plugs as well as wall mount. Table stand is optional.

Liko, Inc
Franklin,, MA 02038
Mar 12, 2008 With total leg height, including wheels, of 2 1/3 in., Golvo 7007 LowBase(TM) model features flexible lift strap, vertical lifting motion, and parallel widening base legs. Providing solution for applications such as lifting or transferring patients to or from low profile beds or stretchers, unit is suited for lifts to and from the floor, horizontal lifts, and ambulation assistance for patients weighing up to 440 lb.