Grupo Premo
Barcelona   Spain
Jul 11, 2008 Available in 5.1 x 2.3 x 2.4 mm size, Telecoil TC0502 is a coil with ferrite core which offers high sensitivity in frequency range of 30-40 kHz. Customizable unit is winded with thin copper wire up to 12 µm and its inductance range is 20-170 mH. Meeting ISO/TS 16949:02 and ISO 9001:2000 standards, it is designed for hearing aid systems industry.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.
Maple Grove, MN 55369
Jul 10, 2008 Available with positions ranging from 2-12, KJ Series DIP Switch has electrical ratings of 25 mA at 24 Vdc for switch and 100 mA at 24 Vdc for carry. Featuring electrical life of 2,000 typical with contact resistance of less than 25 mW initial, unit has actuation force of 600 gF max, actuator travel of 0.90 mm, dielectric strength of 500 Vrms min with insulation resistance of greater than 100 MW min, extended actuator height of 0.6 mm, and operating/storage temperature of -40 to 85°C.

Phihong USA
Fremont, CA 94539
Jul 10, 2008 Available in single +12 and +24 Vdc output, Model PSAM30R is 30 W universal 2-wire input adapter that features less than 100 µA leakage current and no load power draw of less than 0.5 W at 115 Vac and less than 0.75 W at 230 Vac. It measures 3.94 x 2.48 x 1.41 in., weighs 7.05 oz, and is equipped with over-voltage, over-current, and short circuit protection. Unit is suited for applications such as portable dental and medical equipment, patient hoists, and dental curing equipment.

Sharps Compliance, Inc.
Houston, TX 77054
Jul 08, 2008 Suited for physicians, dentists, and veterinarian offices, 18-gallon Sharps Disposal By Mail System®, Model 11800, provides safe disposal of used syringes as well as medical waste including biohazard waste and existing sharps containers. U.S. Postal System permits product to be transported to Sharps'-owned medical waste disposal facility in Carthage, TX.

Lee Company, The
Westbrook, CT 06498 0424
Jul 07, 2008 Designed for installation into plastics in medical applications, Model 303 IMH press-in stainless steel orifice ensures that every part is within ±5% of its nominal flow rate. Entrance and exit conditions of miniature flow restrictor are closely controlled. Measuring 2.5 mm, orifice features barbed design that provides press-in installation, ensures retention, and prevents any bypass leakage around unit.

Instrumentation Laboratory
Lexington, MA 02173
Jul 03, 2008 Featuring FDA clearance 510(k) for ACL TOP® software v3.0.0, ACL TOP 500 CTS is designed to meet testing needs of mid- to high-volume hemostasis laboratories. It combines speed, simplicity, and intelligence to meet varied needs of routine and specialty labs, while enabling true standardization across ACL TOP product line by using same reagents and consumables as other models.

Zebra Technologies
Vernon Hills, IL 60061 3109
Jun 24, 2008 Designed to improve patient identification and safety, HC100(TM) enables on-demand individual wristband printing for healthcare organizations. It combines thermal printer and cartridges containing Z Band® direct thermal wristbands, featuring antimicrobial coating. While smart card optimizes print intensity and automatically calibrates for band size, wireless connectivity promotes use throughout facility. Printed barcodes and text withstand range of liquids and remain smudge-free.

Magic Power Technology Inc.
Sunnyvale, CA 94085
Jun 23, 2008 Designed with convection cooling, MPM-706H is 60 W ac/dc medical grade switching power supply that suits medical computer applications where low noise and high MTBF are required. It comes with universal ac input, fitted with Molex type I/O connectors, and can generate 60 W at 50°C under convection cooling or 80 W with forced air cooling. IEC60601-1 compliant unit features low earth leakage current and short-circuit, over voltage, and overload protection.

Imtec Corporation
Ardmore, OK 73401
Jun 20, 2008 Suited for 3D scanning, SPRITE Computed Tomography system features 4-stage rotary system that ensures successful scanning setup and execution. Automated CT scanning system has rollers that facilitate movement and small dimensions that allow passage through any conventional doorway.

Protek Power North America, Inc.
Hudson, MA 01749
Jun 18, 2008 Compliant with worldwide EN60101-1 medical safety standards, PM300 Series is comprised of 21 models with single, dual, triple, or quad outputs from 3.3-48 Vdc. All outputs are floating, adjustable, and fully regulated. Multiple output models also are available with high-current, 24 Vdc primary output. Supplied in 7.5 x 4.5 x 1.75 in. package, AC/DC switching power supplies have universal 90-264 Vac input as well as double fusing, protection circuitry, and remote inhibit features.

Aloka Co., Ltd.
Wallingford, CT 06492
Jun 06, 2008 Portable ProSound 2 diagnostic system offers Extended Pure Harmonic Detection, Multi Frequency Imaging, and Edge Enhance Function to support accurate diagnosis. Users can manage and store patient data and built-in Cine Memory facilitates image search function. Selections of probes covering various applications are available.

Belmont Metals, Inc.
Brooklyn, NY 11207
Jun 04, 2008 Flexible with regards to formulas and quantities, pure metals and alloys can be provided in custom shapes and sizes to meet casting, plating, brazing, soldering, and other application requirements. In addition to standard nickel shapes, service deals with powders and shapes for Dipolarized Ni Anodes, Ni Cathodes, Low Melting Foundry Shot, as well as Ni-Copper and Cupro Nickel in standard and special compositions. Monel® (Nickel-Copper alloy) and Nickel-Silver are also available.

Tornado® Industries, Inc.
Chicago, IL 60706
Jun 03, 2008 Featuring enclosed bag system and 4-stage HEPA filtration, CK 14/1 traps all impurities to protect health of users as well as those residing in indoor environments such as hospitals, schools, and hotels. Headlight illuminates work area, and injected, non-marking, molded-rubber bumpers protect walls and furnishings along 14 in. wide cleaning path. Vacuum uses 80 cfm clean-air suction system and 12 in. metal brushroll with natural bristles.

Astrodyne Corp.
Mansfield, MA 02048
Jun 03, 2008 Designed to meet space and performance parameters for medical and dental systems, PMMK225 series provides output of 225 W with active PFC. All models accept universal input from 90-264 Vac, and 6 models - available in each package style - are available with single outputs from 5-48 Vdc. Approved for UL/EN60601-1 medical safety specifications, series provides power densities to 4 W/in.³ and features SMT construction. Package styles include U-Channel, fully enclosed, or DIN Rail mount.

Astrodyne Corp.
Mansfield, MA 02048
Jun 02, 2008 Featuring fully enclosed or fully enclosed with DIN Rail mounts, PMMK320 high density switching power supplies are approved for UL/EN60606-1 medical safety specifications, and provide 320 W output power with active Power Factor Correction. All models accept universal input from 90-264 Vac and 6 models provide single outputs from 5-48 Vdc. Delivering power densities of up to 6 W/cu in., units offer rugged aluminum enclosure with fan included and screw terminals for I/O connections.

Aqua-Nu Filtration Systems Ltd.
Dublin 3   Ireland
May 28, 2008 PURITYCAPSULE(TM) uses high flow rate ceramics which remove/kill potential disease-causing micro-organisms, including bacteria such as E. coli, Cryptosporidium, and cysts of Giardia - water-borne pathogens associated with gastro-intestinal diseases. Portable filter allows users to drink water from virtually any source. Eliminating need for continually purchasing plastic bottles of water, unit has ability to be fitted to used plastic water bottles and cold water taps.

Eppendorf North America, Inc
Westbury, NY 11590-0207
May 22, 2008 Vacufuge plus is designed for drying, concentration and purification of DNA, RNA, nucleotides or proteins. With fast evaporation and no sample loss, device features LCD display and control panel that improves handling while reducing evaporation times by allowing for solvent pre-selection as well as 4 heating levels for optimized drying speed. Vacuum is available with 13 fixed-angle rotors for different vessel sizes and capacities.

Sperian Hearing Protection, LLC
San Diego, CA 92154
May 20, 2008 Designed for use in intermittent and impact noise environments, Impact(TM) Sport sound amplification earmuffs feature electronics that automatically stop amplifying when ambient sound reaches 82 dB. Sounds below that level are picked up by built-in directional microphones and amplified. Baseplate chamber and non-woven layer manage airflow to control how sound reaches ear. Units operate for up to 350 hr on 2 AAA batteries and automatically shut off after 4 hr.

Alcan, Inc.
Montreal, QC H3A3G2
May 13, 2008 Optimizing shelf life of pharmaceuticals, StabilitySolutions(TM) DRY consists of bi-layer desiccant container for oral solid products. Technology incorporates desiccant material into product contact layer, eliminating need for desiccant sachet or canister. Also intended for oral solid dose products, tri-layer StabilitySolutions(TM) BARRIER container sandwiches ethylene vinyl alcohol between 2 layers of high-density polyethylene for oxygen and moisture protection.

Sperian Hearing Protection, LLC
San Diego, CA 92154
May 07, 2008 Compatible with Howard Leight® earmuffs and available in 2 sizes, balaclava-style Polar Hood(TM) provides protection in cold climates while ensuring optimal earmuff attenuation. Side panels eliminate any gaps between earcup and ear, forming tight acoustic seal. Seal around face prevents further exposure, and adjustable design includes front zipper for ventilation and foldaway visor. Slim Belt Clip provides handy storage when earmuffs are not in use.