Instrumentation Laboratory
Lexington, MA 02173
Jul 03, 2008 Featuring FDA clearance 510(k) for ACL TOP® software v3.0.0, ACL TOP 500 CTS is designed to meet testing needs of mid- to high-volume hemostasis laboratories. It combines speed, simplicity, and intelligence to meet varied needs of routine and specialty labs, while enabling true standardization across ACL TOP product line by using same reagents and consumables as other models.

Zebra Technologies
Vernon Hills, IL 60061 3109
Jun 24, 2008 Designed to improve patient identification and safety, HC100(TM) enables on-demand individual wristband printing for healthcare organizations. It combines thermal printer and cartridges containing Z Band® direct thermal wristbands, featuring antimicrobial coating. While smart card optimizes print intensity and automatically calibrates for band size, wireless connectivity promotes use throughout facility. Printed barcodes and text withstand range of liquids and remain smudge-free.

Magic Power Technology Inc.
Sunnyvale, CA 94085
Jun 23, 2008 Designed with convection cooling, MPM-706H is 60 W ac/dc medical grade switching power supply that suits medical computer applications where low noise and high MTBF are required. It comes with universal ac input, fitted with Molex type I/O connectors, and can generate 60 W at 50°C under convection cooling or 80 W with forced air cooling. IEC60601-1 compliant unit features low earth leakage current and short-circuit, over voltage, and overload protection.

Imtec Corporation
Ardmore, OK 73401
Jun 20, 2008 Suited for 3D scanning, SPRITE Computed Tomography system features 4-stage rotary system that ensures successful scanning setup and execution. Automated CT scanning system has rollers that facilitate movement and small dimensions that allow passage through any conventional doorway.

Protek Power North America, Inc.
Hudson, MA 01749
Jun 18, 2008 Compliant with worldwide EN60101-1 medical safety standards, PM300 Series is comprised of 21 models with single, dual, triple, or quad outputs from 3.3-48 Vdc. All outputs are floating, adjustable, and fully regulated. Multiple output models also are available with high-current, 24 Vdc primary output. Supplied in 7.5 x 4.5 x 1.75 in. package, AC/DC switching power supplies have universal 90-264 Vac input as well as double fusing, protection circuitry, and remote inhibit features.

Aloka Co., Ltd.
Wallingford, CT 06492
Jun 06, 2008 Portable ProSound 2 diagnostic system offers Extended Pure Harmonic Detection, Multi Frequency Imaging, and Edge Enhance Function to support accurate diagnosis. Users can manage and store patient data and built-in Cine Memory facilitates image search function. Selections of probes covering various applications are available.

Belmont Metals, Inc.
Brooklyn, NY 11207
Jun 04, 2008 Flexible with regards to formulas and quantities, pure metals and alloys can be provided in custom shapes and sizes to meet casting, plating, brazing, soldering, and other application requirements. In addition to standard nickel shapes, service deals with powders and shapes for Dipolarized Ni Anodes, Ni Cathodes, Low Melting Foundry Shot, as well as Ni-Copper and Cupro Nickel in standard and special compositions. Monel® (Nickel-Copper alloy) and Nickel-Silver are also available.

Tornado® Industries, Inc.
Chicago, IL 60706
Jun 03, 2008 Featuring enclosed bag system and 4-stage HEPA filtration, CK 14/1 traps all impurities to protect health of users as well as those residing in indoor environments such as hospitals, schools, and hotels. Headlight illuminates work area, and injected, non-marking, molded-rubber bumpers protect walls and furnishings along 14 in. wide cleaning path. Vacuum uses 80 cfm clean-air suction system and 12 in. metal brushroll with natural bristles.

Astrodyne Corp.
Taunton, MA 02780
Jun 03, 2008 Designed to meet space and performance parameters for medical and dental systems, PMMK225 series provides output of 225 W with active PFC. All models accept universal input from 90-264 Vac, and 6 models - available in each package style - are available with single outputs from 5-48 Vdc. Approved for UL/EN60601-1 medical safety specifications, series provides power densities to 4 W/in.³ and features SMT construction. Package styles include U-Channel, fully enclosed, or DIN Rail mount.

Astrodyne Corp.
Taunton, MA 02780
Jun 02, 2008 Featuring fully enclosed or fully enclosed with DIN Rail mounts, PMMK320 high density switching power supplies are approved for UL/EN60606-1 medical safety specifications, and provide 320 W output power with active Power Factor Correction. All models accept universal input from 90-264 Vac and 6 models provide single outputs from 5-48 Vdc. Delivering power densities of up to 6 W/cu in., units offer rugged aluminum enclosure with fan included and screw terminals for I/O connections.

Aqua-Nu Filtration Systems Ltd.
Dublin 3   Ireland
May 28, 2008 PURITYCAPSULE(TM) uses high flow rate ceramics which remove/kill potential disease-causing micro-organisms, including bacteria such as E. coli, Cryptosporidium, and cysts of Giardia - water-borne pathogens associated with gastro-intestinal diseases. Portable filter allows users to drink water from virtually any source. Eliminating need for continually purchasing plastic bottles of water, unit has ability to be fitted to used plastic water bottles and cold water taps.

Eppendorf North America, Inc
Westbury, NY 11590-0207
May 22, 2008 Vacufuge plus is designed for drying, concentration and purification of DNA, RNA, nucleotides or proteins. With fast evaporation and no sample loss, device features LCD display and control panel that improves handling while reducing evaporation times by allowing for solvent pre-selection as well as 4 heating levels for optimized drying speed. Vacuum is available with 13 fixed-angle rotors for different vessel sizes and capacities.

Sperian Hearing Protection, LLC
San Diego, CA 92154
May 20, 2008 Designed for use in intermittent and impact noise environments, Impact(TM) Sport sound amplification earmuffs feature electronics that automatically stop amplifying when ambient sound reaches 82 dB. Sounds below that level are picked up by built-in directional microphones and amplified. Baseplate chamber and non-woven layer manage airflow to control how sound reaches ear. Units operate for up to 350 hr on 2 AAA batteries and automatically shut off after 4 hr.

Alcan, Inc.
Montreal, QC H3A3G2
May 13, 2008 Optimizing shelf life of pharmaceuticals, StabilitySolutions(TM) DRY consists of bi-layer desiccant container for oral solid products. Technology incorporates desiccant material into product contact layer, eliminating need for desiccant sachet or canister. Also intended for oral solid dose products, tri-layer StabilitySolutions(TM) BARRIER container sandwiches ethylene vinyl alcohol between 2 layers of high-density polyethylene for oxygen and moisture protection.

Sperian Hearing Protection, LLC
San Diego, CA 92154
May 07, 2008 Compatible with Howard Leight® earmuffs and available in 2 sizes, balaclava-style Polar Hood(TM) provides protection in cold climates while ensuring optimal earmuff attenuation. Side panels eliminate any gaps between earcup and ear, forming tight acoustic seal. Seal around face prevents further exposure, and adjustable design includes front zipper for ventilation and foldaway visor. Slim Belt Clip provides handy storage when earmuffs are not in use.

Atlas Vac Machine Div., Planet Products Corp.
Cincinnati, OH 45242
May 02, 2008 Model 18:30S can provide over 10,000 lbf on large format (18 x 30 in.), Silverstone-coated sealing platen. In addition to PLC for temperature, dwell time, and pressure management, sealer includes standard secondary IR thermal sensing that provides packaging engineers with platen temperature information needed during validation. Optional Direct Force Sensing System provides reading of force (lbf) exerted by tray sealer press against seal tooling on every stroke.

Abbott Laboratories
Abbott Park, IL 60064
Apr 18, 2008 Designed for labs that typically perform less than 200 immunoassay tests per day, ARCHITECT® i1000SR® provides continuous access to reagents and samples while it is running. Unit can accommodate 65 patient samples and process up to 100 tests/hr. It is able to prioritize emergency test results and turn them around in less than 16 min. To facilitate training of new laboratory personnel, instrument features wide test menu and minimal maintenance needs.

Binder-USA
Camarillo, CA 93012
Apr 16, 2008 Designed for medical and industrial applications with limited space, Series 702 M9 molded connectors are manufactured with IP67 environmental protection and 360° EMI shielding. Molded with PUR material for protection from harsh environments, preassembled cordsets are designed to improve strain relief and are available in lengths of 2 and 5 m.

Nortech Laboratories, Inc.
Farmingdale, NY 11735
Apr 10, 2008 Designed to meet all cryotherapy and modality needs, InstaKool(TM) Instant Cold packs feature urea-based formulation. Cold packs exceed ANSI Requirements for Cold Packs 5.2.1.6 and ASTM Method D882 for Tensile Strength at Break for cold duration. Latex-free products are available in 3 sizes for different contours and uses.

Sperian Hearing Protection, LLC
San Diego, CA 92154
Apr 10, 2008 Providing hearing protection/visibility in electrical environments, Howard Leight® Thunder® T2HV Hi-Visibility Earmuffs feature reflective headband that illuminates when exposed to light and bright green earcups for noticeable contrast against dark settings, especially in low lighting situations and inclement weather. With dielectric construction, NRR 28-rated earmuffs will not conduct electricity, and utilize Air Flow Control(TM) technology to provide optimal attenuation across all frequencies.