ARI-Armaturen
Stukenbrock   United Kingdom
Aug 04, 2008 CONA All-in-One solution integrates steam trap, isolation valves, strainer, check valve and blowdown valve and requires just two pipe connections. Multi-valve system performs functions such as isolation, safety, control and steam trapping, and suits industrial applications including main line draining, steam distributing and tracing systems, as well as process industry.

Omega Engineering, Inc.
Stamford, CT 06907
Aug 04, 2008 Suited for petroleum and automotive industries, FPUD500 series of high viscosity drum pumps have ability to empty wide variety of containers in various applications. Pump tube and motor are constructed modularly and supplied separately for maximum flexibility. This series of pump tubes are rated up to 200°F, 15,000 cps viscosity, 1.8 specific gravity, and are available in 316SS or sanitary polished 316SS.

Parker Fluid Control Div.
New Britain, CT 06051-4107
Aug 04, 2008 Available in 2- and 3-way models, manifold mount Cartridge Valves suit air and liquid (including light oil) applications, and meet commercial, industrial, mobile, instrumentation, and medical market needs. Fully assembled units provide no loose parts to assemble together, and sleeve, plunger, spring, and orifice are pressed together as 1 unit. Offered with all 204 and 304 coils, they are normally closed/open with sleeve port size of 1/8 in. Orifice sizes range from 3/64 through 5/32 in.

Humphrey Products
Kalamazoo, MI 49003
Aug 01, 2008 Suited for inline mounting or insertion into custom manifolds, 320 Series ¼ in. ported 3-way direct acting valves have continuous duty coil with power consumption of 8.0 W, flying leads, and push, non-locking manual override. Controlled short-stroke balanced poppet design lends to multimillion life cycle capability, eliminates need for lubrication, and tolerates impurities in air system. Valves have Cv of 1.0 and are rated for air and inert gas from vacuum at 28 in. Hg to 125 psig.

BEX, Inc.
Livonia, MI 48150 5031
Aug 01, 2008 Designed for high-pressure trimming applications in pulp and paper industry, BEX WT series nozzles feature wear resistant synthetic ruby insert. They produce steady laminar stream of liquid at up to 2,000 psi of pressure. Adjustable Teflon® shield protects orifice from loose strands of fiber (produced by high-pressure trimming action) that could otherwise plug orifice.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Aug 01, 2008 Compatible with HASCO cooling system, HASCO Safety Coupling Z80700 is operated by bayonet-type mount to prevent unintentional decoupling of cooling system. Capable of avoiding leakages, it can be used for clean room applications. Unit is available as straight design with connecting thread in nominal dia of 9-13 mm, and is suited for use with oil, water, and air.

NewAge Industries Inc.
Southampton, PA 18966
Aug 01, 2008 Designed for mating with fluoropolymer tubing, Pureloc® fittings are used in clean-application industries such as semiconductor, food and beverage, pharmaceutical, and chemical. Made from virgin-grade, chemically-inert PFA fluoropolymer, they suit pure fluid applications. With see-through construction that assures user of proper fitting installation, units have 4 precision-made parts (nut, gripper, ferrule, and body) that provide leak-proof connections. Fittings come in 1/8 to ¾ in. sizes.

FlowCon Americas LLC
Charlotte, NC 28269
Aug 01, 2008 Able to adjust to one of 40 different flow rates using special secure key, AB valves provide automatic balancing which enables desired flow rate to be achieved as well as dynamic balancing which maintains flow rate as each valve compensates for pressure fluctuations in system. They feature pressure and/or temperature measurement plugs for verifying conditions of heating/cooling water in system, and multiple connections for different system configurations.

Emerson Process Management
Austin, TX 78754
Aug 01, 2008 Environmentally friendly Dosaodor-D computerized pressure injection system utilizes solenoid injector algorithm to ensure uniform odorant atomization into natural gas in transmission and distribution pipelines. Pressure injection system, with frequent small injections of odorant and wick distribution insert, is accurate over large range of pressures and flow rates. ROC800 series controller enables configuration and operation of system for measurement of data in real time.

Continental Hydraulics
Savage, MN 55378
Aug 01, 2008 F0*MSV line of stackable valves feature direct operated cartridge-type electrical operated poppet that allows for high flow-through or restricted adjustable flow-through. Available in variety of coil voltages and either NO or NC cartridges to meet specific user requirements, valves can be added to any existing manifold mounted valves where system enhancements may be required. Space saving units ensure zero fluid leaks through O-ring sealed installation.

Continental Hydraulics
Savage, MN 55378
Aug 01, 2008 With modular, space saving design, PO*MSV line of stackable, pressure compensator valves are used to create constant pressure differential between inlet and outlet of proportional valves. Available in both Restrictive and By-Pass styles for either variable or fixed delivery circuits, valves control pressure drop by sensing pressure in A & B outlet ports, which is added to adjustable spring setting, causing valve to open or close to help maintain constant pressure drop.

Continental Hydraulics
Savage, MN 55378
Aug 01, 2008 Double Redundant Dual Monitoring and Lock-Out valves offer clean compact solutions, either connected directly to main power source or as part of a branch circuit feeding one of many work cells. Double redundant package is built with 2 valves that incorporate spool position monitoring switches and 2 pressure tap ports. Lock-Out valve is designed to assist in meeting lock-out/tag-out requirements to protect technicians performing maintenance, repair, or set-up operations.

Continental Hydraulics
Savage, MN 55378
Aug 01, 2008 Model VED05M Proportional Control Valve features On-Board electronic amplifier which is packaged within fully potted, anodized aluminum housing providing IP65 environmental protection. It also features Hall-Effect spool position sensor for closed spool inner loop operation. With field-replaceable components, valve is offered with numerous spool flow ranges, load metering styles, and various spring center conditions, and can be tailored to customer specifications.

Supercritical Fluid Technologies, Inc.
Newark, DE 19711
Jul 31, 2008 Able to pressurize carbon dioxide up to 10,000 psi at flow rates from 0.01-24.0 ml/min, self-contained SFT-10 utilizes dual sapphire syringe pump technology and can perform in standard constant pressure mode as well as optional constant flow mode. Peltier (thermoelectric) technology makes it possible to achieve high pressure without external cooling bath; chiller maintains temperature at pump heads low enough to ensure CO2 remains liquid.

Bosch Rexroth Corp., Industrial Hydraulics Div.
Bethlehem, PA 18017
Jul 31, 2008 Electrohydraulic Flow Matching (EFM) control generates adjusting signals for pump at same time valves are controlled, ensuring adequate flow is made available. Promoting accelerated response to implement hydraulics, solution is operated in open control chain as electro-proportional variable pump. Pressure losses between pump and valve adjust themselves according to operating point.

Maxpro Technologies
Fairview, PA 16415
Jul 30, 2008 Tubing is available that has undergone autofrettage process, which subjects internal bore to pressure high enough to plastically deform it. This results in putting inner wall into compression, providing residual compressive stress once pressure is released. Use of this technique helps extend tube fatigue life.

Midland-ACS
West Midlands   United Kingdom
Jul 30, 2008 Made of 316 stainless steel to offer internal and external protection from liquid and gases, 70 Series is suited for hazardous areas in oil, gas, and petrochemical industries. Direct-acting 3/2 valve is available with connections from ¼-½ NPT and is EExd IIC T6 with IP67 classified. Available in 12, 24, 110 Vdc as well as 24, 110, and 230 Vac options, valve removes potential for leaks and minimizes risk of hazardous contamination.

Lee Company, The
Westbrook, CT 06498 0424
Jul 28, 2008 Designed specifically for optimal performance in harsh duty applications, Model 440C Lo-Lohm Chek® check valve is constructed entirely of corrosion-resistant stainless steel. It features durable 440C poppet and seat that provides resistance to damage from contamination. Available in forward and reverse flow directions, space saving unit offers high flow capability. Custom valves using MP35N can also be designed for severely corrosive environments.

NLB Corporation
Wixom, MI 48393 2824
Jul 28, 2008 Able to clear blocked pipes of up to 12 in. dia in single pass, RPN2420 has 5 high-cohesive, sapphire nozzles positioned for peak efficiency, 1 in front and 4 on sides. Rotation is variable from 50-500 rpm with full speed control, and nozzle operates at pressures up to 20,000 psi with flow up to 20 gpm. Featuring precision machined stainless steel body, 3 lb self-propelling, field-repairable nozzle clears blockages horizontally, vertically, and in tight elbows.

Hayward Industrial Products Inc., Hayward Flow Control Systems
Clemmons, NC 27012
Jul 28, 2008 Corrosion resistant Hayward pneumatic actuators come in various air-to-air (double acting) and air-to-spring (fail-safe) ¼ turn spring return models with 2 and 4 piston rack and piston or vane designs, depending upon model. They incorporate manual override, position indicator, and permanent lubrication. Options such as solenoid valves with different voltages, limit switches, cycle speed controls, position transmitter, and positioners are also available.