Binks ITW Industrial Finishing
Glendale Heights, IL 60139
Jul 18, 2008 Suited for small and medium wood shops, Binks Comet 4/12(TM) pump is designed with air powered 12:1 two-ball piston pump that is capable of producing 0.4 gpm at 60 cycles/min. Created to apply water-borne and solvent-borne coatings, it can spray wood coatings at fluid outlet pressures from 300-1,200 psi. Available in wall-mount, cart-mount, or tripod-mount outfits, pump features balanced fluid section for steady, even coating flow and hard chrome coated SS pump rod.

Elma Electronic Inc.
Fremont, CA 94538
Jul 18, 2008 Designed for empty slots in MicroTCA chassis, AMC Air Baffle/Filler Boards come in both full and mid sizes and in single module format. AMC air baffle can be plugged into unused slots in MicroTCA chassis to redirect or contain airflow, which helps keep cool air within critical parts of enclosure. Cards also act as filler board, preventing open slots and helping to protect chassis from outside elements such as dust.

Qosina Corp.
Edgewood, NY 11717 8329
Jul 18, 2008 Hemostasis valves function as seal by preventing air and fluid leakage around wires and instruments. Able to click into open and semi-open positions and lock with thumb lever, one-handed hemostasis valve (Part #33057) has 2 channels. Straight primary channel has silicone gasket, while angled secondary channel can be used for pressure monitoring and flushing. Self-sealing hemostasis valve (Part #33058) is high pressure and luer activated, and can connect to standard catheters.

Thomas Products Division
Sheboygan, WI 53081
Jul 17, 2008 Rated for max flow of 2.37 cfm, Series 660/680 WOB-L® pumps incorporate wetted aluminum parts treated for corrosion protection and single-phase AC motors of permanent split capacitor design. Oil-less pistons and cylinders, in addition to intake filters, ensure non-contaminated air flow, while SS valves, piston seals, hard-coated aluminum cylinders, and permanently lubricated bearings help extend product life. Pumps provide up to 28.5 in. Hg vacuum or 45 psi pressure.

Viking Pump Inc., A Unit Of IDEX Corp.
Cedar Falls, IA 50613 0008
Jul 17, 2008 Dimensionally interchangeable with Viking Heavy Duty Bracketed packed and sealed pumps, Universal Mag Drive Series facilitates upgrade process. Sealless offering features thrust-controlled design, allowing short-term run-dry capabilities and bi-directional pump operation for application flexibility. Offered in cast iron, steel, and stainless steel, products are suited for use with hazardous, hard-to-seal liquids and offer flow rates to 200 gpm with pressures to 200 psi.

Simrit, A Div. Of Freudenberg-NOK
Plymouth, MI 48170
Jul 15, 2008 With service temperature of -6 to 300°C, Simriz® 508 exhibits plasma resistance and minimum particulation in range of plasma environments. White perfluoroelastomer material is designed for thermal stability and nearly universal protection against chemical attack. Suited for deposition, oxide, and metal plasma etching, ashing, metallization, and ion implant, product is appropriate for chamber lid seals, bell jar seals, endpoint windows, gas inlet seals, and isolator valve seals.

NIBCO, Inc.
Elkhart, IN 46516
Jul 14, 2008 Featuring nylon-coated finish and EPDM-encapsulated disc for good closure during shut downs, GD6765-8N grooved butterfly valve is gear-operated for slow-close functionality to protect piping from water shock. It is UL-/ULC-listed to 350 psi water working pressure and UL-listed for indoor/outdoor use. Additionally, F697-0 Class 250 iron body gate valve is rated to 300 psi and carries FM/NYC MEA approvals. Grooved double door silent check valve, KG900-W 350, is also available.

Valcor Engineering Scientific Div.
Springfield, NJ 07081
Jul 11, 2008 Designed to handle liquid carbon dioxide, SV91 Series features all-welded, leak-tight stainless steel construction with straight-thru flow path. Direct-acting shear seal design ensures positive shifting and sealing. Available in 2 versions rated at 350 and 1,000 psi, solenoid valve is suited for use in fog producing systems, food processing, chillers, and other temperature control devices.

Watson-Marlow Bredel Pumps
Wilmington, MA 01887
Jul 11, 2008 Suited for harsh processing applications, Model 520RE high-pressure chemical metering peristaltic pump offers flows of 55 gph at 30 psi to 7 gph at 100 psi. It covers range of applications including low shear feed for contamination-free transfer of acids, bases, and slurries found in chemical-based industries. With repeatability at 99.5%, self-priming pump can accommodate flow rates from 0.1 µL to 350 gpm, and can withstand pressures up to 232 psi.

Ross Controls
Troy, MI 48083
Jul 09, 2008 Available with ¼ and 3/8 in. ports, manual L-O-X® Valves control airflow and are designed to meet OSHA regulations, ANSI standards, European regulation EN 1037, and Canadian Standard CSA Z460. When handle is pulled outward, air moves freely. Short inward push of handle shuts off airflow and opens exhaust port to release downstream air. Equipped with Teflon seals, valves offer indicator port option for test point verification of absence of energy downstream.

Flexaust Co., Inc., The
Warsaw, IN 46581
Jul 09, 2008 Utilizing negative/positive pressure, Flexaust Flex-Lok® ET High Temperature Hose is designed for -65 to 1,050°F continuous service and excursions to 1,250°F. Available with 6:1 and 8:1 compression ratios, it comes in sizes ranging from 3-12 in. I.D. in standard 25 ft lengths. Hose features single-ply aluminum coated fiberglass ceramic fabric construction with coated steel wire that is mechanically crimped in continuous process and which acts as wearstrip for external abrasion resistance.

Sealant Equipment & Engineering, Inc.
Plymouth, MI 48170-0965
Jul 08, 2008 Based on No-Drip® design that integrates carbide ball-end needles with carbide seats for fluid control, 2200-545 Series Adjustable Stroke Mix-Dispense Valve can control flow of 2-component adhesives and sealants such as silicones, epoxies, urethanes, and acrylics. Measuring 2.25 in. dia and 5.5 in. long, double air actuated valves have two 1/8 NPT ports for 4-way pneumatic connections. Rated for 3,500 psi, valve is also available with eyelet stem for attaching to tool balance.

American Casting & Manufacturing Corp.
Plainview, NY 11803
Jul 07, 2008 Used for tamper-evident and security applications, Model PSW-97 plunger seal locks come pre-numbered with 7 sequential digits and 12 in., 3-Ply galvanized wire (pre-inserted or loose). High security tamper evident self-locking plastic seal, designed for use with wire, is made with styrene or acetate plastic with stainless steel locking plunger and supplied with lettering and numbering. All colors available, including clear.

Universal Air Filter Co.
Sauget, IL 62206
Jul 07, 2008 Allowing users to replace only air filter media, reusable clamshell or thin envelope air filter frame fits in spaces less than 0.25 in. thick and can be removed for service while continuing to reduce risk of disturbing dust loaded on filter. Frames are also open for access to replaceable media for cleaning and substitution. RoHS compliant unit meets UL 94 HF-1, ATCA, UL 900 Class 2, CE, Telcordia, NEBS GR-78-CORE and GR-63-CORE, micro TCA, and ETSI standards.

Binks ITW Industrial Finishing
Glendale Heights, IL 60139
Jul 07, 2008 Designed for high-flow circulation systems requiring moderate pressure, Exel(TM) pump works with water-borne and solvent-borne fluids, catalyzed coatings, high solids coatings, abrasive materials, and moisture-sensitive materials. Available in three 4:5.1 all-stainless-steel models, it delivers up to 6.85 gpm at 60 cycles/min. Pump features maximum inlet and working pressure of 100 and 450 psi, respectively, and SS wetted fluid chambers with self-priming pistons.

Lee Company, The
Westbrook, CT 06498 0424
Jul 07, 2008 Available in forward and reverse flow configurations, Model 250 Zero Leak Chek® miniature valve uses elastomeric seat to achieve zero leakage, while remaining components are constructed entirely of stainless steel. Valve can flow over 62 slpm (air) at 25 psid, yet has 0.250 in. dia. It comes with maximum working pressure of 3,000 psid.

Universal Flow Monitors, Inc.
Hazel Park, MI 48030
Jul 07, 2008 Providing ±2% full-scale accuracy and ±.25% repeatability of indicated flow, CoolPoint(TM) flowmeters offer corrosion resistance in processing cooling water, water/glycol coolant, or low-viscosity fluids. Vortex shedding electronic flowmeters are available in ¾, 1, 1½, and 2 in. pipe sizes with maximum 4-20 mA transmitter flow rates of 25, 50, 100, and 200 gpm, respectively. Units feature PVDF sensors, Viton® fluoroelastomer seals, and flow totalizer.

Lee Company, The
Westbrook, CT 06498 0424
Jul 07, 2008 Designed for installation into plastics in medical applications, Model 303 IMH press-in stainless steel orifice ensures that every part is within ±5% of its nominal flow rate. Entrance and exit conditions of miniature flow restrictor are closely controlled. Measuring 2.5 mm, orifice features barbed design that provides press-in installation, ensures retention, and prevents any bypass leakage around unit.

Sauer-Danfoss
Ames, IA 50010
Jul 03, 2008 Utilizing integral electro-hydraulic servo piston assembly to controls rate and direction of hydraulic flow, Model H1 115/130cc is designed for high and medium power mobile machinery that demands steady, instant propulsion and precise control. Closed-circuit, variable displacement, axial piston pump supports next generation engines as industry moves toward Tier 4 emission controls. It is fully PLUS+1(TM) Compliant to interface with company's electronic machine control architecture.

PIRTEK USA
Rockledge, FL 32955
Jul 03, 2008 Offered in 18 models, Japanese Metric Hose Fittings are available with both British Standard Pipe thread as well as Metric Thread forms. Female versions come in straight configurations as well as 45° and 90° elbows, while male fittings feature standard 30° cone. Applications include imported equipment ranging from construction machinery and forklift trucks to plastic injection molding machines.