L.U.I. PLUS
Jasper, IN 47546
Jun 27, 2008 Available in lever (ADA approved) and knob styles, Biometric locking system delivers functionality based solely on thermal imaging of user's fingerprint to eliminate concerns over forgotten, lost, or stolen keys. Product can also be set to unlocked mode during times when open access is desired. Suited for commercial buildings, system offers administration and audit control capabilities as well as built-in LCD that facilitates enrollment/deletion of up to 1,000 users.

American Casting & Manufacturing Corp.
Plainview, NY 11803
Jun 25, 2008 Supplied on rolls and sequentially numbered, LabelZon security labels have writable surface, are tamper-evident and self-voiding, and cannot be resealed. Hidden Message is revealed, typically VOID or OPEN, if opened and re-seal is attempted. Tell-tale adhesive residue is also left on application surface for further evidence. Applications include warranty seals for computers, envelope seals for sensitive correspondence, election machines, ballot boxes, and containers.

Rino Industries Ltd.
Chesterfield S41 9RN  United Kingdom
Jun 20, 2008 AURUM(TM) cross recessed pan head, socket head cap screws, hexagon nuts, and washers are made of AURUM thermoplastic polyimide resin. Brown in color, material exhibits heat resistance that enables continuous use at 240ºC and clean characteristics that ensure outgas is reduced to microscopic levels. Amounts of metallic impurities, such as alkali metal, are also reduced to microscopic levels. UL 94V-0 flame resistant material is also resistant to chemicals, plasma, radiation, and abrasion.

Allegro MicroSystems Inc.
Worcester, MA 01615
Jun 11, 2008 Offered in reverse battery protected packages, temperature-stable and stress-resistant latches have dynamic offset cancellation that reduces residual offset voltage. On single silicon chip, Models A3290 and A3291 include Hall-voltage transducer, small-signal amplifier, chopper stabilization, Schmitt trigger, and short-circuit protected open-collector output to sink up to 25 mA. Onboard regulator allows operation with 4.2-24 V supply voltages with -40 to 125°C operating temperatures.

Quality Transmission Components
Garden City Park, NY 11040
Jun 10, 2008 Designed to fasten rotating components without marring shafts, QTM-BSS Series are available in 18 sizes to fit shafts ranging in diameter from .157-.787 in. Their outer diameters range from .315-1.102 in. and they are constructed of stainless steel.

Alarm Lock Systems, Inc.
Amityville, NY 11701-2801
Jun 10, 2008 DL5200 standalone pushbutton cylindrical lock is 100% keypad programmable with multi-level security supporting up to 100 users, 10 managers, and 3 one-time service codes. Unit retrofits cylindrical lever-sets using slightly modified ANSI A115 Series Prep. With override feature that includes key in knob cylinder, lock runs average of 80,000 cycles with 5 AA batteries. For outdoor use, it comes in weatherproof model outfitted to withstand temperatures of -35 to 66°C.

Alarm Lock Systems, Inc.
Amityville, NY 11701-2801
Jun 10, 2008 Including DL1200, DL1300, and PDL1300 versions, Narrow Stile Exit Device Trim Pushbutton Locks are designed with all-metal, vandal-resistant 12-button keypads that support 3-6 digit PIN codes, and multilevel user hierarchy. Compatible with Jackson, Dor-O-Matic, Von Duprin, Dorma, Arrow, and DCI & Corbin panic devices, they offer keyless access, audit trail capability, and help protect storefronts and managed properties. DL1300 and PDL1300 feature scheduling and time zone capabilities.

Abloy Security, Inc.
Irving, TX 75063 2665
Jun 10, 2008 Surface mounted or mortised, ABLOY® Cabinet Locks are adjustable from key-removable in locked position only to key-removable in both locked and unlocked positions. ABLOY® EXEC key series restricts key duplication to authorized personnel. Resistant to wear, dirt, moisture, corrosion, and freezing, locks are suitable for all types of weather. Virtually pickproof, spring-free construction prevents locks from theft as well as jamming and ensures smooth operation.

Tri-Bolt, Inc
Eustis, FL 32726
Jun 04, 2008 Engineered to accommodate exterior and non-stationary doors, Tri-Bolt® can be used in tandem with deadbolt lock to help withstand burglary attempts and severe storms. Design creates tight bond with door's current weather-stripping, insulating interior spaces to conserve heating/cooling effort. Placed at top of door, product cannot be seen from outside.

Videx, Inc.
Corvallis, OR 97330
Jun 02, 2008 Providing accountability and key control, CyberLock® system reduces incidences of internal theft and provides users with complete control over who can access their display cases. It consists of electronic lock that cannot be compromised by any conventional lock-picking methods, and electronic key that cannot be duplicated. Each time electronic key opens lock, record of opening is stored in both lock and key providing detailed audit report of openings and denied entries.

Harting KGaA
  Germany
Jun 02, 2008 Providing safety for extreme applications in industry and transportation, Han® 4 A insert includes Han-Quick Lock® connection technique that facilitates termination without need for any special tool. Insert offers vibration secure connection.

J. W. Winco, Inc.
New Berlin, WI 53151
May 30, 2008 Offered in blank, tapped, and tapped through hole versions, Wing Nuts have hot stamped, matte shot-blasted finish. They feature slight dimple on ends to permit better grip and provide increased finger contact area. For certain minimum quantities, blank version can be tapped or reamed in inch or metric sizes to meet customer requirements.

Kennametal, Inc.
Latrobe, PA 15650-0231
May 28, 2008 Developed for KENNA PERFECT turning system, UP Turning Inserts provide soft cutting action and large rake angle, which minimizes cutting resistance, optimizing surface finish on parts and extending tool life. Geometry optimizes resistance to depth-of-cut notching. Available in KC9225(TM), KC9240(TM), and KC5010(TM) grades, inserts are recommended for medical and food industries as well as flange manufacturing, chemical industry, and oil and petrochemical businesses.

Wire Belt Company Of America
Londonderry, NH 03053-7449
May 16, 2008 Designed for use with Flat-Flex® conveyor belts, C-CureEdge® C-shaped end loops provide maximum safety because they will not snag or tangle during shipment, storage, or installation. This diminishes opportunity for damage to conveyor and minimizes risk of accidents from sharp or burred open ends. No conveyor modifications or reconfigurations are required in drive components, shafting, or other parts on conveyor lines, and individual strand stress is reduced on outside edge of belt.

Kennametal, Inc.
Latrobe, PA 15650-0231
May 15, 2008 KC9225(TM) inserts reduce chip hammering and built-up edge conditions, preventing insert damage in applications demanding continuous to lightly interrupted cuts at high cutting speeds. Deformation resistance combined with sharp cutting edges makes units suitable for machining austenitic stainless steels, when machining at speeds in excess of 550 sfm. Applications include medical and food industries, flange manufacturing, chemical industry, and oil and petrochemical businesses.

Videx, Inc.
Corvallis, OR 97330
May 12, 2008 Rechargeable CyberKey for CyberLock Electronic Lock System allows wastewater facilities to use key that has lithium-ion polymer battery with battery-life of 3-4 yr. Battery fully charges in 15 min to 2 hr and provides 500 openings or 1-2 weeks of performance between charges. Red and green LEDs give feedback on access events and key status. Keys can be color-coded to indicate special user groups.

Richco, Inc.
Morton Grove, IL 60680
May 09, 2008 Molded in UL94 V2 Nylon 6/6, RoHS-compliant TFR Series snaps in place to facilitate assembly. Once self-threading screw is installed, grommet expands and securely locks screw and assembled parts in place. Grommet legs are forced outward to help seal mounting hole and protect against dust and moisture. Mounting hole is square to prevent rotation.

Richco, Inc.
Morton Grove, IL 60680
May 09, 2008 PGSB-A Series open bushings convert raw or sharp edged holes into smooth, insulated holes. Snapped into hole by hand, they insulate and protect wires and cables, and split design allows assembly into holes already containing cables. RoHS-compliant bushings are available in 14 sizes to accommodate various hole diameters and panel thicknesses.

Rino Industries Ltd.
Chesterfield S41 9RN  United Kingdom
May 06, 2008 Utilizing miniature precision anti-backlash screw, low-profile leadscrew actuator offers screw position repeatability of 0.00127 mm and lead accuracy of 0.0006 mm. There are 3 screw leads available, from 0.50-10.85 mm, each with 68 mm stroke. Along with body and carriages made from 6082 T6 aluminum, elements of construction include 303 stainless steel leadscrew with TFE coating, self-lubricating polyacetal anti-backlash nut with spring, and stainless steel linear slides.

Tyz-All Plastics, Inc.
Plainview, NY 11803
May 01, 2008 Tie Strips on Rolls are all purpose ties available in various widths for random cutting. Plastic ties are available in 3/8, 9/16, and 3/4 in. widths. Rolls offer cusyom tie lengths to bundle cable wires, lawn hoses, food container closures, and luggage identification and security. Standard Tie-Strip colors are white, yellow, green and blue with additional colors available by request.