Atlona Technologies
San Jose, CA 95131
Nov 12, 2008 AT-HD44M-SR HDMI 4x4 Matrix switcher/distribution system allows users to switch up to 4 HDMI 1.3 sources between 4 remote displays. Taking HD video at resolutions up to 1,080 p over HDMI 1.3 connection, unit extends that signal over two CAT5/5e/6 cable up to 200 ft. Suited for in store video displays, digital signage, as well as education and worship facility applications, fully HDCP compliant product is controllable through IR, RS-232, and manual input.

SmartAVI, Inc.
Burbank, CA 91504
Nov 11, 2008 HD-compatible (720p, 1080i, 1080p) SuperMatrix combines up to 16 multiformat video, stereo audio, RS-232, and IR signals on one frame and sends them through one cat5 cable to as many as 64 Remote LCD TVs and speakers located up to 1,000 ft away. Designed to maintain source signal integrity, this point-to-point, full non-blocking switching matrix supports video resolutions up to 1,900 x 1,200 and can be controlled via software interface, remote control, Internet, or RS/232.

Samtec, Inc.
New Albany, IN 47151 1147
Nov 11, 2008 Combining integral metal ground plane with Edge Rate contact system, QEM8/QEF8 connector set is footprint compatible with QTE/QSE Series, providing higher speed without requiring PCB redesign. Designed to withstand "zippering" when unmated and ideal for rugged, high-speed applications, connector system features .8 mm pitch, 20, 40, and 60 pins/row, dual row design, and standard alignment pins. Optional Pick-n-Place pads and Tape-n-Reel packaging is also available.

ERICSSON INC.
PLANO, TX 75024
Nov 11, 2008 With ability to deliver up to 35 W output power, PKU-E DC/DC converter is designed for distributed power architectures in telecom-systems. Measuring 7.5 mm, surface mount version of unit has MTBF of 1.71 mil hr. Distributed-power Open Standards Alliance compatible, converter's electrical design is based on fly-forward topology that enables wide input voltage range while maintaining high efficiency. Other features included are pre-bias, monotonic rise, and load and line regulation.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Nov 10, 2008 Series A1F Compact Pressure Switch features 316 SS wetted materials of and fluorocarbon ensuring chemical compatibility with wide range of process media. Its field-installable weatherproof enclosure is available in 316 SS for harsh environmental applications or weatherproof polycarbonate. Open-case-style switch offers 15 A contact for direct control of motors or pumps as well as indicating scale for field adjustment.

Omnetics Connector Corp.
Minneapolis, MN 55432
Nov 10, 2008 With total mated length of 9.0 mm and ODs from 0.122-0.217 in., Circular Nano series uses mil-quality contact system to provide reliable solution in harsh operating environments. Design maintains electrical integrity while withstanding temperature variations from -55 to +125°C as well as vibration. Polarized hard gold-plated contacts are shrouded in 6-, 11-, 16-, or 28-position liquid crystal polymer housing to MIL-M-24519, making them capable of withstanding 2,000+ mating cycles.

Amperite Co., Inc.
Union City, NJ 07087
Nov 10, 2008 Featuring 100% solid state construction, SEQ Series may be used to alternately switch 2-5 loads in repeating sequence with frequency and duration adjustability. Timers have max load current of 5 A, operating range of -30 to +70°C, and voltage drop of 2.5 Vrms or less. While ac units are available in 12, 24, and 120 V ratings with power requirements of 5 VA or less, dc units are available in 12, 24, 36, 48, and 110 V ratings with power requirement of 5 W or less.

Alpha Wire Corp.
Elizabeth, NJ 07207 0711
Nov 10, 2008 Available with operating temperature range of -50°C up to 200°C, cables are designed to meet stringent requirements for use in Wind Turbine Tray Cables in accordance with UL Subject 2277. Cables are suiteed for applications involving power distribution, control, and monitoring within the wind turbine. Optional features included are sunlight resistance, oil resistance (I and II), and FT-4 or IEEE 1202 flame resistance.

E-Switch Inc.
Brooklyn Park, MN 55428 1514
Nov 07, 2008 Available as SPST or DPST, Model LP6 features contact rating of 12 mA at 12 Vdc, contact resistance of 50 mW, insulation resistance of 100 MW, and dielectric strength of 500 Vac. Unit operates from -20 to +70°C and provides 200,000 lifecycles. Applications include computers, servers, peripherals, consumer electronics, testing and instrumentation, and telecommunications.

Ideal Industries, Inc.
Sycamore, IL 60178
Nov 07, 2008 PowerPlug push-in disconnect lets electricians safely disconnect hot and neutral ballast wiring prior to fixture servicing, preventing contact with live voltage. Halves of disconnect are snapped together to re-power fixture. Designed for switching and dimming, 3-wire model is rated to 3 A/120 V and fits through ½ in. knockout. Also available, 2- and 3-wire PowerPlugs are designed for use with 18 AWG solid wires. Male-female construction passes UL1977 finger probe requirements.

Weidmuller, Inc.
Richmond, VA 23236
Nov 07, 2008 Offering savings on both I/O wiring and panel space with 12.5 mm width, ITXPlus measures, filters, and isolates different input parameters and converts them into 4-20 mA output. It can be programmed to suit full range of common analog signals and sensor types. Including selectable upscale or downscale sensor-break response, unit features built-in functionality for applications requiring temperature measurements and user-programmable characteristic table containing up to 101 measurement values.

Tripp Lite
Chicago, IL 60609
Nov 07, 2008 Including 3 models, SmartPro® Shallow-Depth Rackmount UPS systems feature shallow mounting depth of 17.75 in. SMART3000CRMXL has 4U height, 17.75 in. depth, and 3,000 VA/2,880 W capacity, which can increase to 3,600 VA/3,600 W with optional hardwire connection. SMART2200CRMXL has 2,200 VA/1,900 W capacity, 4U height, and 17.75 in. depth, while SMART1500CRMXL has 1,500 VA/1,440 W capacity, 2U height, and 19.5 in. depth.

Raycap, Inc.
Morrisville, NC 27560
Nov 07, 2008 Comprised of single 40 mm dia distribution-grade metal oxide varistor (MOV) disc in environmentally-sealed aluminum housing, Strikesorb SPD modules protect equipment from lightning strikes, power surges, and spikes. Strikesorb 40-3000 provides maximum continuous operating voltage (MCOV) of 2.55 kV with rated voltage of 3 kV, and has nominal discharge current of 10 kA. Strikesorb 40-4000 and Strikesorb 40-5000 offer MCOV of 3.4 and 4.25 kV, with rated voltage of 4 and 5 kV, respectively.

Electro Standards Laboratories
Cranston, RI 02921 3403
Nov 07, 2008 Controlled manually via front panel pushbutton or remotely from DB9 port, models 7340, 7340A, and 7340B RJ45 Cat 5e on-line/off-line switches feature off-line switch position to disconnect/isolate port A from Port B. Models 7340 and 7340A's remote ports accept dry contact open/close logic to control switch position, where as 7340B accepts RS-232 Serial ASCII commands to control switch position. Switch ports of all units are transparent to all data and 8 signals of each interface are switched.

Power Distribution, Inc.
Richmond, VA 23223
Nov 07, 2008 Featuring front access design, Wavestar(TM) Mission Critical 400, 625, and 750 KVA PDUs display both PDU critical functions and Branch Circuit Monitoring System in single Wavestar(TM) monitor. These points can also be provided remotely to building management system via Modbus or SNMP. Additional features include compression lugs, plug-in style breakers, hinged panels with 2 point locks, and bus connections for transformer and circuit breakers.

Aimtec, Inc.
Dollard Des Ormeaux, QC H9G3B9  Canada
Nov 06, 2008 Comprising 35 models, AM12T-Z and AM12TW-Z series include 2:1 voltage ranges of 9-18 Vdc, 18-36 Vdc, and 36-75 Vdc or 4:1 input ranges of 9-36 Vdc and 18-75 Vdc. Dimensions (31.75 x 20.32 x 10.16 mm) conserve PCB real-estate, while thermal performance eliminates need for external thermal management solutions. Regulated and isolated (1,600 Vdc) single and dual outputs of 2.5, 3.3, 5, 12, 15, ±5, ±12, and ±15 Vdc are fully protected against short circuit, over-voltage, and over-current.

Lenze Corp.
Fairfield, NJ 07004
Nov 06, 2008 Housed in NEMA 4X enclosure, SMVector Frequency Inverter includes highly visible internal disconnect switch, which removes power to facilitate service and maintenance. Switch eliminates need for separate external disconnect switch as well as additional wiring between external disconnect and SMVector drive. Lockable in off position, switch allows personnel to service motor while it is still connected to drive.

Altech Corp.
Flemington, NJ 08822
Nov 06, 2008 Designed to satisfy industrial, IT, and data network application requirements, PS-S10 and PS-S100 Series switching power supplies offer 10-100 W, single-output; 88-264 Vac universal input; and 1 W no-load power consumption. These NEC Class 2 power supplies, able to be installed on DIN rail TS-35/7.5 or 15, can be cooled by free air convection up to 140°F and come fully enclosed in plastic housing. Other features include active PFC function and 100% full load burn-in test.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Nov 06, 2008 Made of copper-free aluminum, U-Line® 125 Vac Portable Receptacle/GFCI delivers open neutral protection to prevent electrical shock risk, while also safeguarding connected apparatus against damage from short circuits and current overload. Unit safely works in environments classified by NEC as hazardous due to presence of explosive liquids or gases. It includes GFCI designed in accordance with OSHA requirements for 20 A receptacles, 3 ft SO power cord, and 20 A NEMA 5-20P plug.

Automation Systems Interconnect Inc.
Mechanicsburg, PA 17055
Nov 06, 2008 With current ratings ranging from 1-63 A, NDB2 UL 1077 miniature circuit breakers feature visual color-coded trip indicator, shock proof screw clamp connections, and are RoHs compliant. They include high current versions for protection up to 125 A and dc rated styles in both 1- and 2-pole. DIN rail-mountable units come in 18 mm footprint and come in 1-, 2-, or 3-pole in industry standard B, C, and D trip curves, all with a 10 kA interrupt capacity.